What is the cubic capacity of a 7.6-meter refrigerated truck?

1 Answers
OLilliana
09/08/25 4:52am
7.6-meter refrigerated trucks can generally carry about 6 tons with a capacity of approximately 40 cubic meters. Load capacity of refrigerated trucks: The dimensions of the cargo compartment and the approved tonnage vary by manufacturer. Generally, the load capacity is approximately: 7.2 meters - 5 tons, 35 cubic meters; 9.6 meters - 10 tons, 55 cubic meters; 13.7 meters - 25 tons, 80 cubic meters; 15 meters - 30 tons. Considerations when selecting tonnage: Choosing the right capacity for a 7.6-meter box truck is crucial. For 7.6-meter box trucks, bigger capacity is not always better; the goal is to achieve large capacity while maintaining stable vehicle performance. Generally, a 6-ton capacity is sufficient for short-distance transportation, while long-distance transportation requires about 8-10 tons to meet demand.
Was this review help?
5
3
Share
More Forum Discussions

What are the reasons for the high fuel consumption of the Passat Lingyu 1.8t?

The reasons for the high fuel consumption of the Passat Lingyu 1.8t and tips to reduce fuel consumption are as follows: The reasons for high fuel consumption are: Piston ring damage, leading to oil burning, preventing fuel from fully combusting and performing work. New drivers may keep the accelerator pedal pressed without lifting it, failing to pay attention to shifting gears, which inadvertently increases fuel consumption. Machine aging and faults in the computer control system. Damage to the fuel tank or fuel lines, resulting in oil leakage. Tips to reduce fuel consumption: Master the operation of the clutch pedal through practice, ensuring smooth and steady movements. Develop good habits by pressing the pedal all the way down and releasing it slowly. Coordinate the accelerator and clutch properly; when starting, shift into first gear, slowly release the clutch, and apply throttle at the half-clutch point, only fully releasing the clutch once the car starts moving.
3
5
Share

What are the reasons for Mercedes-Benz owners to return their vehicles?

Mercedes-Benz owners can return their vehicles for the following reasons: Performance faults: If serious safety performance faults persist after two repairs or new serious safety performance faults appear, the vehicle can be returned. Powertrain faults: If the engine or transmission still does not function properly after two replacements or repairs, the vehicle can be returned. Therefore, the reasons for returning the vehicle as stipulated by law are legally protected, and owners are advised to return the vehicle immediately. Body or chassis issues: If major components such as the steering system, braking system, suspension system, front and rear axles, or body still do not function properly after two replacements, the vehicle can be returned.
16
1
Share

What are the reasons for the Mercedes-Benz C200 protection system malfunction?

Mercedes-Benz protection system malfunction causes and solutions are as follows: Fault reasons: Damaged airbag, damaged seat belt sensor, damaged airbag sensor, anti-towing issues, etc. Fault solutions: The owner can try turning off the anti-towing function. If the anti-towing issue persists, it is necessary to visit an authorized Mercedes-Benz 4S dealership for inspection and repair. Mercedes-Benz's PRE-SAFE is a predictive safety system, also known as a pre-safe protection system. It provides the vehicle with reactive capabilities, much like a living organism, making certain self-protection adjustments when detecting danger, thereby avoiding or reducing the degree of harm.
12
2
Share

Does the Song Plus DM-i have a cigarette lighter?

The Song Plus DM-i has a cigarette lighter. Disadvantages of the Song Plus DM-i: The cigarette lighter is controlled by the key, making it inconvenient to charge or listen to music when the car is parked. Opening the trunk does not trigger the alarm. The accelerator pedal is stiff, gear shifting is not smooth, and the fuel gauge warning light comes on too early. The engine noise is slightly loud, and the seat belt buckle stays in a low position. Introduction to DM-i technology: The core components of BYD's DM-i Super Hybrid Technology are the Xiaoyun plug-in hybrid-specific engines, which come in two different versions. The 1.5L engine is mainly used in the Qin PLUS and Song PLUS, while the 1.5T turbocharged engine is used in the larger Tang DM-i model.
9
3
Share

How often should the battery of the Lavida 1.4T be replaced?

Lavida 1.4T battery should be replaced every 3 to 5 years. Lifespan of the Lavida battery: The Lavida is a compact sedan under the Volkswagen brand. The Lavida battery can generally last for more than 3 years under normal charging conditions in the car's generator and in the absence of electrical leakage or grounding issues. Battery maintenance methods: Avoid parking the car in an open parking lot for extended periods. The car engine may be difficult to start in winter. Each engine start attempt should not exceed 5 seconds, with subsequent attempts spaced at least 15 seconds apart. Additionally, clean the battery terminals of the Lavida periodically to extend the battery's service life.
6
4
Share

What Causes the Body to Shake When Starting a Bora Engine?

Bora engine starting body shake reasons are as follows: Unstable oil pressure: If you have already cleaned the engine carbon deposits, washed the throttle valve, replaced the oil pads and spark plugs, etc., and still find the body shaking at idle, it is recommended to go to a 4S shop to check the fuel supply pressure and the intake pressure sensor. If the oil pump supply pressure is abnormal or the intake pressure sensor value is incorrect and working poorly, it will cause the body to shake. Aging engine components: The engine mount is actually the shock absorption system of the engine. If there is a problem with the engine mount, these vibrations will be transmitted to the steering wheel and the driving compartment. Dirty engine throttle valve: When there is too much carbon deposit, the gasoline sprayed by the cold start injector will be largely absorbed by the carbon deposits, resulting in a too lean mixture for cold start and difficulty in starting.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.