What is the crash test rating of the Baojun 530?

Where is the fuse box located in the HOWO truck cabin?

Below the dashboard on the passenger side. Here is relevant information: Classification: Automotive fuse boxes are containers for installing vehicle fuses. They can be categorized by fuse size: small automotive fuse boxes; medium automotive fuse boxes; large automotive fuse boxes. Common injection molding materials include: plastic, nylon, bakelite, and PBT engineering plastic, each with varying degrees of high-temperature resistance. Importance of fuse boxes: If the engine is compared to the heart of a vehicle, then the fuse box is its central nervous system. The fuse box is responsible for transmitting driving information to various parts of the vehicle body. It is a critical component among automotive electronic control elements and one of the more technologically sophisticated parts in a vehicle body, requiring strict manufacturing processes.

8

3

Share

What Causes Delayed Gear Shifting in Automatic Transmission Vehicles?

It may be due to excessive viscosity of the vehicle's transmission fluid. It is recommended to check whether the transmission fluid needs to be replaced. Here is the relevant information: Principle of Automatic Transmission Structure: In an automatic transmission, the selection of gear ratios and shifting are performed automatically. The term "automatic" refers to the fact that each gear change in the mechanical transmission is achieved by a system that controls the shifting actuators based on signals reflecting engine load and vehicle speed. Points to Note: The principle of automatic shifting in automatic transmission vehicles relies on a hydraulic system that determines whether to upshift or downshift based on throttle input. Since hydraulic pressure response requires a certain amount of time, the shifting reaction in automatic transmission vehicles is relatively slow.

15

2

Share

What is the working principle of a dry system?

The working principle of a dry system is: The dual clutch consists of three clutch plates of similar size installed coaxially and stacked together. The two clutch plates on the sides are connected to gears 1, 3, 5, 7 and 2, 4, 6, reverse respectively. The middle plate moves between them, engaging or disengaging with the two clutch plates to perform gear shifts. The dry dual-clutch system was actually developed based on the technology of the 6-speed DQ250 wet dual-clutch, simplifying the related hydraulic system. The clutch is located between the engine and the transmission, acting as a switch for power transfer between the engine and the transmission. It is a transmission mechanism that can both transmit and cut off power. Its main functions are to ensure smooth vehicle starting, reduce impact loads on transmission gears during gear shifts, and prevent overload in the transmission system.

5

3

Share

Should You Turn Off the Air Conditioning Before Shutting Down an Automatic Transmission Car?

You should turn off the air conditioning before shutting down the car. Here are the relevant details: Reason: The air conditioning relies on the car's battery to operate. If you frequently shut down the car without turning off the air conditioning first, it will not only damage the battery's lifespan but also affect the engine's efficiency. Additionally, it may impact the air quality inside the car and the functionality of the car navigation system. Recommendation: It is recommended to manually turn off the cooling function (indicated by the AC button) a few minutes before shutting down the car, while keeping the air blower running for a while (i.e., do not turn off the air supply). This helps the air conditioning evaporator quickly evaporate the surface moisture as it returns to ambient temperature, preventing the damp surface from becoming a breeding ground for bacteria and thus avoiding unpleasant odors caused by the air conditioning evaporator.

17

5

Share

Why is there a knocking sound when releasing the clutch pedal quickly?

A knocking sound at the moment of clutch engagement is caused by transmission linkage jamming, which makes the pressure plate suddenly press against the driven plate resulting in jerking, or by a deformed driven plate or oil-contaminated friction lining, leading to abrupt clutch engagement and impact. It is recommended to have it checked at a 4S shop. Below is relevant information: Automobile Clutch: The automobile clutch is the control device of the manual transmission clutch assembly. Its correct operation directly affects the vehicle's starting, gear shifting, and reversing. Automobile Clutch Operation Method: The clutch pedal release follows the principle of "two fast, two slow, and one pause." Poor coordination between the clutch and throttle during vehicle starting can cause the engine to stall or the car to shake when starting.

9

5

Share

What is the fuel tank capacity of the 2016 Baojun 730?

The fuel tank capacity of the 2016 Baojun 730 is 52 liters. The powertrain of the Baojun 730 still consists of a 1.5T manual transmission and a 1.8L AMT. This 1.5T engine is independently developed by Wuling. The engine block of Wuling uses cast iron, while Buick uses aluminum. The fuel supply method of Wuling is multi-point injection. The characteristic of this 1.5T engine lies in its abundant low-end torque. From the moment of starting, the briskness of the power has surpassed the previous 1.8L engine. In comparison, the fuel tank capacity of the Lingzhi 2022 M5 in the same class is 55 liters, and the Wuling Hongguang PLUS 2021 commercial version has a fuel tank capacity of 53 liters. During the actual refueling process, the amount of fuel may exceed the calibrated volume. This is because the fuel tank capacity marked by the car manufacturer is from the bottom of the tank to the safety level. There is still some space from the safety level to the tank opening. This space is reserved to ensure that the fuel in the tank can expand when the temperature rises without overflowing the safety space of the tank. If the fuel is filled to the tank opening during refueling, the actual refueling amount will be larger than the calibrated fuel tank capacity. If the owner wants to know the remaining fuel in the tank, they can observe the fuel gauge on the right side of the dashboard, which is marked with E and F. When the pointer is close to E, it means the fuel is almost empty, and when it is close to F, it means the fuel is sufficient.

19

0

Share

What is the crash test rating of the Baojun 530?

Where is the fuse box located in the HOWO truck cabin?

What Causes Delayed Gear Shifting in Automatic Transmission Vehicles?

What is the working principle of a dry system?

Should You Turn Off the Air Conditioning Before Shutting Down an Automatic Transmission Car?

Why is there a knocking sound when releasing the clutch pedal quickly?

What is the fuel tank capacity of the 2016 Baojun 730?

Do Pickup Trucks Run on Diesel or Gasoline?

Where is the first aid kit in the Volkswagen New Sagitar?

What Are the Three Locks in a Car?

Where to Restart After Failing the Slope Section in Subject 2?