What is the correct way to use the one-button start?

1 Answers
AryaMarie
07/29/25 11:07pm
The correct way to use the one-button start: First press the start button, after the ACC light turns on, press the start button again. At this point, the one-button start button turns green, and the vehicle begins self-checking. After the vehicle completes the self-check, press the brake and press the one-button start button once more to start the vehicle. The one-button start device is part of a smart car, serving as a button mechanism to simplify the starting process, and it can also be used to turn off the engine. This device can be retrofitted either at the original key lock position or as an independent panel. It operates as a software-based one-button start system. There are three key points to note when installing a one-button start system in a car: the wiring of the plug under the ignition switch, the position of the button, and the handling of the steering lock.
Was this review help?
15
2
Share
More Forum Discussions

Can I drive on the highway without ETC?

It is possible to drive on the highway without ETC. Vehicles without ETC installed can still use the traditional method of taking a toll card at the entrance toll station and stopping to pay at the exit toll station. The lane design includes ETC-dedicated lanes, while also retaining a few manual toll lanes to serve vehicles without ETC. ETC is an electronic toll collection system that allows vehicles to pass through toll stations without stopping. It uses microwave short-range communication between the vehicle's electronic tag installed on the windshield and the microwave antenna in the ETC lane at the toll station. This system connects with the bank's backend settlement via computer networking technology, enabling automatic toll payment without stopping.
9
5
Share

How to Reset the Tire Pressure Light on a Passat?

Adjust the tire pressure to the standard value, then proceed with the tire pressure system setup. The specific setup method is as follows: Turn on the ignition, press and hold the set button for more than 2 seconds until the instrument panel emits a "ding" prompt sound. Confirm that the new parameters are stored, and the warning light will turn off. Here is some related information: 1. Tire pressure monitoring automatically checks the tire pressure in real-time while driving and alerts the driver to leaks or low pressure to ensure driving safety. There are two common types: direct and indirect. 2. A direct tire pressure monitoring system has pressure sensors and transmitters installed on each wheel. If any tire's pressure falls 25% below the recommended cold tire pressure in the driver's manual, it alerts the driver. The warning signal is precise, and if a tire is punctured, causing rapid pressure loss, the direct system provides an immediate alert. 3. An indirect tire pressure monitoring system is much cheaper than the direct type. It uses the speed sensors in the car's ABS braking system to compare the rotation counts of the four tires. If one tire has lower pressure, its rotation count will differ from the others. By utilizing the same sensors and signals as the ABS system and adjusting the software in the car's computer, the system can warn the driver if one tire's pressure is lower than the other three.
18
4
Share

Where is the Dewei engine produced?

Dewei engines are produced in Kunming, Yunnan, China. They are jointly developed by Yunnei Power and German FEV Engine Company, utilizing German technology. These engines are known for their strong power, low fuel consumption, quiet operation, fast acceleration, and easy maintenance. The Dewei four-valve engine is equipped in a wide range of vehicles, including pickup trucks, light trucks, medium trucks, and heavy trucks. An engine is a machine that converts other forms of energy into mechanical energy. It originated in the UK and can refer to either a power generation device or the entire machine including the power unit. Types of engines include internal combustion engines, external combustion engines, and electric motors.
13
4
Share

Can a car without license plates drive on the highway?

A car without license plates cannot drive on the highway, but it can apply for temporary license plates to do so. In addition to applying for temporary license plates at the traditional vehicle management office, car owners can also go to any traffic branch or team vehicle management station to apply for temporary license plates for their vehicles. When applying for temporary license plates, the car owner needs to provide some documents to the traffic management department. Car license plates are panels hung on the front and rear of the vehicle, which have a unified format and style as stipulated by national vehicle management regulations. They are hard number plates with registration codes issued by the vehicle management authority after reviewing, inspecting, and registering the vehicle that has applied for the plates.
7
1
Share

How to Set the Ambient Lighting in Passat?

To set the ambient lighting in a Passat, use the buttons on the right side of the multifunction steering wheel to navigate to the multifunction menu. Find the settings option, then select 'Vision and Lighting,' and choose the ambient lighting option to adjust it. Taking the 2020 Passat as an example, it is a midsize car with the following dimensions: length 4933mm, width 1836mm, height 1469mm, and a wheelbase of 2871mm. The 2020 Passat is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum torque of 250Nm, and a maximum power of 110kW, paired with a 7-speed dual-clutch transmission.
10
2
Share

Where is the fender of a car located?

The fender of a car is located above the tires, between the door, hood, and bumper. The fender, also known as the wing panel, is a type of covering component on motor vehicles and non-motor vehicles, which can be divided into front fenders and rear fenders. The functions of the fender are: 1. Utilizing fluid dynamics to reduce the drag coefficient, making the car drive more smoothly; 2. Preventing gravel and mud kicked up by the wheels from splashing onto the bottom of the car body during driving. The design principles of car fenders: 1. Verify the fender size using the wheel bounce diagram based on the selected tire model and size to ensure the maximum limit space when the front tires rotate; 2. For dynamic considerations, the rear fender is slightly arched outward in a convex curve.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.