What is the correct way to use the one-button start?

1 Answers
DePhoebe
07/29/25 4:17pm
The correct way to use the one-button start is: 1. After sitting in the driver's seat, press the start button, at which point the ACC light will turn on, then press again for the vehicle to perform a self-check; 2. Depress the brake pedal and press the one-button start to ignite the engine; 3. Release the foot brake; 4. Depress the foot pedal, shift into drive gear, and release the handbrake; 5. Release the foot brake and press the accelerator to complete the start. The one-button start system is part of a smart car, serving as a button device that simplifies the starting process and can also be used to turn off the engine. The functions of the one-button start include: 1. Multiple start modes; 2. Convenience and speed; 3. Stable and reliable performance; 4. Intelligent keyless entry; 5. Dual-mode free switching for smart keys; 6. Smart card backup key; 7. Intelligent silent car wash mode.
Was this review help?
10
2
Share
More Forum Discussions

What are the body dimensions of the Wuling Xingchen?

Wuling Xingchen body dimensions are 4594x1820x1740 (mm). The following are the features of Wuling Xingchen's fuel consumption and engine. Wuling Xingchen's fuel consumption: The comprehensive fuel consumption per 100 kilometers is 7.1-7.7L, and the actual average fuel consumption per 100 kilometers is about 8.5L. Features of Wuling Xingchen's engine: All Wuling Xingchen models are equipped with a 1.5L turbocharged engine, with a maximum power of 147 horsepower and a maximum torque of 250 N·m. The transmission system is matched with a 6-speed manual and CVT transmission. The parameters of this engine are moderate.
15
3
Share

What are the reasons for the Magotan dashboard not lighting up?

Magotan dashboard not lighting up is caused by fuse damage or circuit issues. The detailed reasons and solutions are as follows: Fuse damage: When the dashboard power supply fuse is blown, the Magotan dashboard cannot function normally, resulting in it not lighting up. If you have the tools, it is recommended to replace the fuse first. If the dashboard lights up after replacement, it indicates no further issues. Circuit issues: The power supply circuit for the dashboard may have an open circuit or short circuit. You can look for an adjustable brightness variable resistor, open the interior, and repair the circuit. However, it is more recommended to go to a 4S shop for circuit repairs, as it is more convenient, faster, and safer.
2
5
Share

What is the fuel consumption of the fourth-generation Geely Emgrand?

Geely Emgrand fourth-generation fuel consumption is 5.3L/100km. Relevant information about Geely Auto is as follows: Meaning of Geely logo: The new Geely Auto brand LOGO continues the six-gemstone design concept from the Brand 3.0 era, using the expanding universe as its design origin, incorporating silver starlight, deep space gray, and earth blue. It showcases Geely Auto's evolution from pursuing blue skies and vast lands in the Brand 3.0 era to seeking the boundless universe. The new LOGO symbolizes that Geely Auto is entering a new strategic era of youthfulness, technological advancement, and globalization. Brand honors: The independently developed 1.4T turbocharged engine, 1.8TD and 1.0TD turbocharged direct injection engines were awarded 'China's Heart' Top Ten Engines of the Year, and the 7DCT dual-clutch automatic transmission was recognized as one of the world's top ten transmissions.
6
5
Share

What is the fuel consumption of the fourth-generation Geely Emgrand?

The fuel consumption of the fourth-generation Geely Emgrand is 5.3L/100km. Here are the details about the fourth-generation Emgrand: Powertrain Configuration: The fourth-generation Emgrand is the first sedan in the Emgrand family built on the BMA architecture. It is equipped with a newly optimized 1.5L naturally aspirated engine featuring DVVT technology, delivering a maximum power of 84 kW/114 hp and a peak torque of 147 Nm. Compared to the previous 1.5L engine, these figures represent an increase of 4 kW, 5 hp, and 5 Nm in torque. Chassis: For a new car, the tuning of the suspension directly determines the quality of the driving experience. The fourth-generation Emgrand features a front MacPherson independent suspension and a rear torsion beam non-independent suspension setup. This combination provides substantial improvements in lateral support and vibration damping performance. Particularly, the suspension is soft enough to handle bumpy road conditions smoothly without sacrificing adequate support for the vehicle body.
13
4
Share

What is the actual range of the Model Y Standard Range?

Tesla Model Y has three versions with NEDC ranges of 525KM, 540KM, and 594KM respectively. Below are Tesla's range specifications and factors affecting the range: Tesla's Range: The Tesla Model 3 Rear-Wheel Drive Long Range and Standard Range versions show significantly different deviation rates. The Rear-Wheel Drive Long Range version has a range deviation rate of 12.7%, with an officially claimed range of 668km and an actual tested range of around 583km, resulting in a deviation of approximately 85km. The Standard Range version, however, has a range deviation rate of 31.5%, with an officially claimed range of 468km and an actual tested range of around 321km, resulting in a deviation of approximately 147km. Factors Affecting Range: Battery high and low-temperature technology, optimization of battery BMS technology, upgrades to the vehicle's energy recovery system, lightweight body design, energy-saving technology for hardware equipment, etc. Additionally, external driving conditions, air resistance coefficient, mechanical transmission efficiency, vehicle weight, number of passengers, and other factors can all affect the actual range of an electric vehicle.
16
0
Share

What are the functions of the buttons on the BYD S6?

The functions of the buttons on the BYD S6 include navigation buttons, radio buttons, music buttons, etc. Relevant information about the BYD S6 is as follows: Configuration: The entire series comes standard with a Keyless entry system, one-button start, intelligent induction welcome lights, height-adjustable automatic headlights, welcome lights under the exterior rearview mirrors, door welcome lights, multifunction steering wheel, etc. In terms of power: The BYD S6 is equipped with two engines, a 2.0L and a 2.4L. The 2.0L engine, model BYD483QB, has a maximum power of 140 horsepower and a maximum torque of 186N.m. The 2.4L engine is Mitsubishi's 4G69 engine, with a maximum power of 160 horsepower and a maximum torque of 215N.m. For the transmission system, it is equipped with a 5-speed manual transmission and a 4-speed automatic transmission.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.