What is the correct way to use the lock button?

Should Car Maintenance Be Based on Mileage or Time?

Car maintenance is based on both mileage and time. Vehicle maintenance refers to the regular inspection, cleaning, replenishment, lubrication, adjustment, or replacement of parts related to the car. The scope of car maintenance includes: the engine system, transmission system, air conditioning system, cooling system, fuel system, and power steering system. The purpose of car maintenance is to eliminate potential hazards and extend the vehicle's service life. Minor maintenance is typically performed every 5,000 kilometers or every 6 months, while major maintenance is usually done every 20,000 to 30,000 kilometers or every 2 years. Routine maintenance items include the oil filter, air filter, and cabin air filter.

8

5

Share

What to Do When Encountering Heavy Fog on the Highway

When encountering heavy fog on the highway, you should: 1. Drive at a reduced speed and maintain a safe distance from the vehicle ahead in the same lane; 2. Use lights appropriately to enhance visibility for yourself and others; 3. Apply brakes gently and frequently to control speed and alert following vehicles to maintain distance; 4. Avoid sudden braking or sharp steering to prevent affecting vehicles in other lanes; 5. In case of an accident, take safety measures, protect the scene, and report the incident. Occupants should exit the vehicle and road promptly, standing outside the guardrail to await rescue; 6. Upon hearing emergency horns or collision sounds from vehicles ahead, slow down promptly and find a safe place to stop.

3

Share

Why can't the car door lock after washing?

The reasons why the car door cannot lock after washing are: 1. The door lock actuator is damaged; 2. Caused by a short circuit in the wiring; 3. Signal interference in the vicinity. Precautions for car washing include: 1. Avoid washing the car under strong sunlight, as it can leave dried water marks on the body, affecting the post-wash appearance; 2. Do not use hot water, alkaline water, or water with high hardness, as these substances can damage the paint; 3. Avoid using high-pressure water streams to wash the car body, as excessive water pressure can harm the paint surface; 4. Avoid adding random detergents, as they can strip the oils from the paint surface, accelerating its aging; 5. Avoid improper wiping—use a soft cloth or clean sponge, gently wiping in the direction of water flow from top to bottom, avoiding circular or horizontal motions.

4

Share

How many seat belts are there in the back seat of a car?

There are 3 seat belts in the back seat of a car. When wearing a seat belt, the shoulder strap should cross the chest cavity, and the waist belt should fit snugly against the hip bone. The purpose is to ensure that the impact force in an emergency acts on the human bones rather than the soft internal organs. After fastening the seat belt, pull it to confirm that it is securely fastened and undamaged. Precautions for using seat belts include: 1. Regularly check the technical condition of the seat belt, and replace it immediately if damaged; 2. Correctly wear the three-point waist seat belt; 3. Do not let the seat belt press on hard or fragile objects when in use; 4. Do not tilt the seat back too much, as this may prevent the seat belt from retracting normally and affect its effectiveness.

3

Share

What is Hill Start Assist?

Hill Start Assist is a system that applies braking force to all four wheels to prevent the vehicle from rolling backward, effectively reducing the risk of rollback accidents when parking on a slope. Abbreviated as HAC, it is a function derived from the ESP system. Hill Start Assist allows the vehicle to maintain braking for a few seconds after the driver's right foot leaves the brake pedal when starting on a slope without using the handbrake, enabling the driver to easily transition their foot from the brake pedal to the accelerator pedal to prevent rollback accidents. The methods to activate Hill Start Assist are: 1. Press the ESP button, and the car will automatically enable Hill Start Assist based on road conditions; 2. When starting on a slope: if the handbrake is not engaged, for manual transmission models, the gear lever is in a non-neutral position; for automatic transmission models, the gear lever is in a non-P position, Hill Start Assist will be activated; 3. When the car is stationary and the accelerator pedal is not pressed, Hill Start Assist will be activated.

5

0

Share

How to Replace the Battery in a Mercedes-Benz C200 Key?

Mercedes-Benz C200 key battery replacement method is as follows: 1. Push the small switch with teeth on the tail of the remote to the right; 2. Gently insert the key into the slightly larger hole at the rear of the key slot, insert about one centimeter until you touch a latch for the remote battery cover, then gently pry it open; 3. Open the cover by hand to reveal the remote's battery; 4. Remove the old battery, replace it with a new one, close the key cover, and reinsert the manual key. The Mercedes-Benz C200 has a body length of 4686mm, a height of 1810mm, a width of 1442mm, and a wheelbase of 2840mm. It is equipped with a 1.5T engine and a 9-speed automatic manual transmission, with a maximum power output at 5700 rpm and a maximum torque of 250 Nm, featuring a turbocharged intake system.

12

4

Share

What is the correct way to use the lock button?

Should Car Maintenance Be Based on Mileage or Time?

What to Do When Encountering Heavy Fog on the Highway

Why can't the car door lock after washing?

How many seat belts are there in the back seat of a car?

What is Hill Start Assist?

How to Replace the Battery in a Mercedes-Benz C200 Key?

What engine does the Geely X3 have?

What is Automotive Crystal Coating?

What does 'hold' mean on a car key?

How to Determine Whether a Car Meets China 5 or China 6 Emission Standards?