What is the correct way to use one-key start?

2 Answers
LeBrooke
07/28/25 9:19pm
The correct way to use one-key start is: 1. The driver presses the start button once to turn on the ACC light, then presses it again to initiate the vehicle's self-check; 2. Depress the brake pedal and press the start button to ignite the engine; 3. Release the foot brake and choose to warm up the engine in place, the duration can be adjusted according to the environment; 4. Step on the brake again, shift to D gear, and release the handbrake; 5. Slowly release the foot brake, gently press the accelerator, and the start is complete. It is not necessary to follow these steps every time you start the vehicle, as long as you ensure that the first start of the day involves pressing the start button twice to allow the vehicle to complete its self-check before ignition. The parking method for one-key start models: 1. Depress the brake pedal to bring the vehicle to a smooth stop; 2. Shift the gear from D to N and engage the handbrake.
Was this review help?
17
5
Share
DiEliana
08/12/25 1:59am
As a seasoned driver, I find one-button start really convenient, but it must be used correctly. The proper procedure is: After sitting in the driver's seat, fasten your seat belt first—safety comes first. For automatic transmission vehicles, you must press the brake pedal—this is the crucial step; for manual transmissions, you might need to press the clutch. When ready, hold the start button with your finger for about one second—don't press hard or repeatedly poke it, as the system will sense and start the engine. During startup, pay attention to the dashboard; if the self-check lights flash normally, you're good to go. A common mistake is pressing the button without stepping on the brake, which won't start the car and may wear out the control system. Keep the key in your pocket or bag to maintain proximity; if the battery is low or the remote is too far, the system won't work. Developing this habit saves fuel and reduces engine issues. After starting, don't rush to accelerate—let it idle for about 30 seconds to warm up the engine. In short, don't skip these details—they make driving smoother and reduce safety risks.
Was this review help?
7
2
Share
Expand All
More Forum Discussions

How to Set One-Touch Power Windows?

Methods to set one-touch power windows: 1. Pull the window button directly to raise the window to the top, then keep holding for 3 to 5 seconds before releasing; 2. Press the window button to lower the window completely, also hold for 3 to 5 seconds before releasing, and the one-touch window function will be set. One-touch power windows refer to a system where car window glass can be fully opened or closed with a single button press. Cars equipped with this feature have two-stage window control switches: the first position operates like a regular power window, while the second position allows the window to automatically open or close completely with a single press and release.
8
2
Share

Is it necessary to spray anti-rust paint on the car chassis?

It is not necessary to spray anti-rust paint on the car chassis, because before the new car leaves the factory, the workers have already sprayed a layer of anti-rust paint on the chassis of the vehicle. Even low-end models will be sprayed, and the anti-rust effect is quite good. If you spray anti-rust paint again, not only will the protective effect be insignificant, but it may also cause a chemical reaction with the original anti-rust paint, which could seriously affect the car chassis. The car chassis consists of four parts: the transmission system, the running system, the steering system, and the braking system. Its function is to support and install the car engine and its various components and assemblies, form the overall shape of the car, receive the power of the engine, make the car move, and ensure normal driving.
10
4
Share

Can't You Apply Window Tint Before Registering a New Car?

There is no absolute rule on whether to register a new car first or apply window tint first, but it is recommended that car owners register first because incorrect tint color (e.g., too dark) may affect registration. Impact of Tinting on Registration: Whether a new car with window tint can be registered mainly depends on whether the applied tint meets the required standards. Currently, the vehicle management department primarily refers to the GB7258-2004 "Safety Technical Conditions for Motor Vehicles Operating on Roads" enacted in 2004. Vehicle Management Office Requirements for Window Tint: The driver's compartment must ensure the driver's forward and side vision. The visible light transmittance of the front windshield and the windshield area outside the driver's view must not be less than 70%. Mirror-like reflective sunshade films are not allowed on any window glass.
12
0
Share

What is the use of car bounce mode?

For automatic transmission vehicles, when the sport mode is activated, the car becomes more aggressive with faster response, power available on demand, improved performance, and more driving fun. After the sport mode is turned on, the impact on the engine is minimal, and the engine load is actually reduced after high-speed gear shifting. As for the transmission, it only increases the speed without adding wear. The sport mode is also called the S gear, which is different from the D gear. Introduction to S gear: The S gear, or sport gear, is the so-called sport mode. Engaging this gear is equivalent to downshifting and accelerating in a manual transmission. The difference is that a manual transmission can downshift across gears, allowing you to shift from 5th gear to 2nd gear to increase speed for overtaking, provided the speed is not too high. However, this operation may cause some impact on the transmission and engine. But the S gear in an automatic transmission does not have this problem. Function of sport mode: The sport mode only changes the power output characteristics by altering the throttle pedal characteristics and the gear shifting logic of the transmission (making it easier to release power, which will be explained in detail later). The sport mode is just a mode, so it does not have the ability to change the engine power (increase or decrease). The sport mode makes it easier to fully release the engine's performance without reservation.
8
4
Share

What does the exclamation mark and P on the dashboard mean?

An exclamation mark and P displayed on the dashboard indicate a fault in the electronic parking system. The meaning of dashboard warning lights may vary depending on the vehicle model and brand, so it's essential to refer to the car's user manual for specific details. Electronic parking refers to the technology that achieves parking braking through electronic control. The electronic parking brake is a system that implements parking braking via electronic control. The function of electronic parking is to provide temporary parking in stop-and-go traffic situations, such as at a red light. When you stop and release the brake pedal, the auto-hold feature quietly activates to lock the wheels, and it automatically releases when you press the accelerator pedal again.
12
3
Share

What to Do About Transmission Oil Leak in Boyue?

Solutions for transmission oil leak in Boyue: 1. If the lubricant is improperly selected, causing excessive foam or too much lubricant, replace or adjust the lubricant; 2. If the drain plug and the fixing bolts of the transmission case and cover are loose, tighten them according to the specified torque; 3. If the leak is caused by a cracked transmission case or worn extension case oil seal, replace them with new ones; 4. If the odometer gear limiter is loose or damaged, tighten or replace it. The Boyue is a compact SUV under Geely Auto. In terms of body dimensions, its length, width, and height are 4519mm, 1831mm, and 1694mm respectively, with a wheelbase of 2670mm.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.