What is the correct way to use electric parking?
3 Answers
The correct method for using electric parking is: 1. Press the car's brake pedal; 2. Press the car's one-touch start button; 3. The car's dashboard lights up, and the entire vehicle's power is activated; 4. Press the autohold button located inside the car to enable the automatic parking mode. Automatic parking refers to an automatic braking function. Once activated, for example, when stopping at a traffic light, it is equivalent to not having to pull the handbrake. The method for using the vehicle's automatic parking is: simply press the automatic parking button on the car to activate it. Automatic parking refers to the vehicle's intelligent electronic handbrake, which is a function within the braking system. After the vehicle comes to a stop, it automatically applies the handbrake to ensure safety, and lightly pressing the accelerator will automatically release the handbrake effect.
I've been driving an electric car for several years, and the electric parking brake is really handy to use. When parking, make sure the car has come to a complete stop, press the parking button on the center console or near the steering wheel lightly while holding down the brake pedal, and the green light will indicate successful activation. When starting off, press the brake pedal first, then press the release button or gently step on the accelerator pedal, and the system will automatically disengage the lock. Be more careful when operating on steep slopes—let the car come to a full stop before pressing the button to avoid rolling. I’ve gotten into the habit of turning off the air conditioning or other loads before engaging the parking brake to prevent system overload. If you hear unusual noises, the sensors might be dirty; regularly wiping the button with a cloth and checking brake pad wear can prevent malfunctions. Remember, don’t press it randomly while driving, as it could damage the brake discs. Make each parking operation smooth and consistent, and once you develop the habit, it becomes incredibly convenient.
As an experienced driver, I believe the key to electric parking lies in the proper sequence of actions. After parking, immediately press the brake pedal and activate the parking system by pressing the button to ensure it locks the wheels; before driving, you must first press the brake pedal and then release it for a safe and smooth start. It's crucial to understand that it operates based on electronic signals controlling hydraulics or wire pulling, unlike the mechanical operation of traditional handbrakes. For example, when parking on a slope, I wait three seconds for the system to stabilize before pressing the button to prevent accidental release. In wet or cold weather, pay extra attention to the button's responsiveness to avoid water accumulation affecting it. I also recommend testing the parking function monthly, such as pulling to a stop on flat ground to check the locking effect, to detect battery power issues early. The correct usage isn't just about pressing the button but combining it with overall driving habits, ensuring you check the indicator light status before and after each operation.
