···
Log in / Register

What is the correct way to use car lights?

5 Answers
LoganLynn
07/28/2025, 08:43 PM

The correct way to use car lights is: 1. Turn the left light control switch forward one notch for parking lights; 2. Turn it forward two notches for low beams; 3. Push the light control lever forward once for high beams; 4. Lift the light control lever forward and upward once for the right turn signal. Precautions for using car lights are: 1. Turn on low beams when driving at night; 2. Do not use high beams when a following vehicle is driving close to the vehicle in front in the same direction; 3. When passing sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic lights at night, alternately use high and low beams to signal.

Was this review help?
14
4
Share
Tricia
08/11/2025, 06:19 AM

Proper use of vehicle lights, I believe, should start with safety regulations. As someone who frequently deals with driving, I emphasize: headlights must be turned on from sunset to sunrise to improve visibility. Use only low beams on urban roads to avoid dazzling others; on highways, switch to high beams when there are no vehicles ahead for better distance vision, but immediately switch back when oncoming traffic appears, adhering to the 50-meter distance rule. In adverse weather conditions like rain or fog, use fog lights in combination with low beams to enhance penetration, and avoid misusing high beams. Turn signals should be activated about 30 meters in advance, flashing before changing lanes to alert following vehicles and prevent collisions in blind spots. Additionally, regularly check bulbs and wiring to ensure they don’t suddenly fail. Statistics show that good lighting habits can reduce accident rates by 30%, a key point I remind myself of every time before driving. Adopting these practices makes travel safer and more reassuring.

Was this review help?
10
3
Share
Expand All
StJames
10/01/2025, 03:57 AM

I've been commuting by car for several years, and using lights correctly has become a daily habit. I usually turn on the headlights when it's dark or rainy, using only low beams in the city to avoid glare, and switching to high beams on open highways for better visibility, then switching back when another car approaches. Fog lights are only used during heavy rain or fog, not normally to save power. Turn signals are crucial—I turn them on a few seconds before changing lanes to let others know my intention. My car has energy-saving LED lights, but I still use them wisely and avoid unnecessary usage. Every week, I quickly check if any bulbs are burnt out, learning from a breakdown last winter to inspect in advance. These simple measures make driving safer and encourage better cooperation from others.

Was this review help?
10
0
Share
Expand All
McJake
11/14/2025, 09:57 PM

With years of experience in this field, proper headlight operation relies on practice and maintenance. Locate the switch position before starting the engine, use low beams for daily driving, and only activate high beams in complete darkness with no oncoming traffic—always be ready to switch back to avoid glare. Fog lights have a separate switch and should only be used when necessary. Operate turn signals smoothly without rapid flashing to prevent circuit burnout. Prolong bulb lifespan by minimizing frequent on/off cycles, and test brightness during routine maintenance to replace them promptly. In rainy or slippery conditions, adjust lights to brighter settings for better traction. Adhering to these habits ensures durable and safe lighting without costly repairs.

Was this review help?
9
2
Share
Expand All
VanPenelope
01/04/2026, 11:33 PM

I care about the environment, and discussing the balance of headlight usage is essential. Proper use can save electricity and reduce carbon footprint, while prioritizing safety. Use energy-efficient LED bulbs, and only turn on lights when needed, such as at night, avoiding wasteful use of high beams or fog lights. Turn off daytime running lights manually or automatically during the day to save power, provided it doesn’t reduce visibility. In rainy or foggy conditions, use fog lights with low beams to enhance penetration without blinding others. Regular checks ensure efficient operation, reducing pollution and preventing accidents. These practices align with global energy-saving efforts on the road.

Was this review help?
20
3
Share
Expand All
More Forum Discussions

What does the roadside parking space from 20:00 to 7:00 mean?

Roadside parking space from 20:00 to 7:00 refers to the allowed parking time between 8:00 PM and 7:00 AM. Areas where parking is strictly prohibited: Road shoulders with yellow no-parking lines indicate areas where roadside parking or stopping is prohibited. The length of the marking indicates the scope of the no-parking zone. Yellow grid lines are used to mark areas where parking is prohibited for any reason. These are generally applied at intersections, entrances/exits, and other locations prone to traffic congestion due to temporary parking. Special areas such as within 30 meters of bus stops, gas stations, emergency stations, and in front of fire stations do not allow temporary parking. Parking is not permitted at intersections, railway crossings, sharp curves, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, or within 50 meters of these locations. No parking is allowed in sections with separation facilities between motor vehicle lanes and non-motor vehicle lanes or sidewalks, as well as at pedestrian crossings and construction zones.
18
0
Share

What Are the Causes of Squeaky Car Seats?

Car seats may squeak due to the following reasons: 1. Loose seat screws: If the screws securing the seat are loose, the seat may wobble and produce abnormal noises. In this case, check and tighten the seat screws to avoid potential safety hazards. 2. Lack of lubrication in the sliding mechanism: If the seat's sliding mechanism lacks lubrication, it may also produce noises when the vehicle passes over bumpy roads. Simply remove the seat and reapply lubricant to resolve this issue. 3. Debris near the seat: Determine whether the noise is coming from the seat itself or from debris near the seat. 4. Seat cover friction: The noise may also be caused by friction from the clips on the seat cover, which is a normal occurrence.
9
3
Share

What is the most fuel-efficient temperature setting for car air conditioning?

The most fuel-efficient cabin temperature is 26°C. Proper air conditioning usage tips: 1. Optimal timing for turning on AC: The first action after entering the car should be opening windows and activating the AC's external circulation to expel hot air. Switch to internal circulation only after the cabin temperature drops. 2. Turn off AC during prolonged stops: When cabin temperature becomes comfortable, temporarily turn off the AC and open windows for ventilation. 3. Never turn off engine before AC: Several minutes before reaching your destination, turn off the AC while activating natural ventilation to allow temperature recovery in AC ducts, eliminating temperature differentials with outside air and maintaining system dryness. 4. Alternate between circulation modes: While internal circulation can be used, avoid prolonged operation. Initially use external circulation when starting AC, then switch to internal after cooling, periodically alternating between both modes.
20
0
Share

What Causes Flames to Shoot Out of the Exhaust Pipe?

Flames shooting out of the exhaust pipe may occur due to the following reasons: 1. Broken copper wires in the low-voltage wire of the car's distributor: This results in insufficient voltage. 2. Insufficient ignition voltage of the spark plug: When some copper wires in the low-voltage wire are broken, the ignition voltage provided to the spark plug is insufficient, leading to incomplete combustion of gasoline. 3. Combustion of fuel-air mixture encountering sparks in the exhaust: Unburned fuel-air mixture enters the exhaust pipe and combusts upon encountering sparks in the exhaust, causing flames to shoot out of the exhaust pipe. 4. Prompt action required: It is advisable to address this issue as soon as possible, as it may cause certain damage to the cylinder.
20
3
Share

Where to Renew Driver's License in Taiyuan?

All vehicle management offices can handle license renewal: 1. Go to the local vehicle management office: To renew an expired driver's license, you need to go to the local vehicle management office. The required documents for renewal include ID card, driver's license, medical examination certificate, photos, etc. 2. The vehicle management office is mainly responsible for: motor vehicle registration, modification, transfer, mortgage, cancellation registration, driver's license application, replacement, renewal, inspection, and other related business for motor vehicles and drivers. 3. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses", Article 57: Motor vehicle drivers should apply for license renewal at the vehicle management office where the license was issued or at another vehicle management office within 90 days before the expiration of the motor vehicle driver's license.
4
0
Share

What does engine timing mean?

Engine timing is a crucial factor in ensuring proper ignition and operation of the engine. The ignition advance angle refers to the crankshaft rotation angle from the moment the spark jumps between the spark plug electrodes until the piston reaches top dead center. Here are relevant details: 1. Delayed ignition: If ignition occurs too late (when the piston reaches top dead center), the air-fuel mixture burns as the piston moves downward. This combustion occurs during volume expansion, resulting in reduced cylinder pressure, decreased engine power, increased heat loss due to larger contact area between hot gases and cylinder walls, leading to engine overheating and higher fuel consumption. 2. Advanced ignition: If ignition occurs too early, complete combustion happens during the compression stroke. The cylinder pressure rises sharply, reaching maximum pressure before the piston reaches top dead center, creating significant resistance against the ascending piston. This not only reduces engine power and increases fuel consumption but may also cause engine knocking.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.