···
Log in / Register

What is the correct way to use car air conditioning in summer?

4 Answers
OKai
07/29/25 11:09am

The correct way to use car air conditioning in summer is: 1. Sit in the car and open the windows for ventilation; 2. Start the engine and turn on the blower to expel contaminated and hot air from the AC system; 3. After 5 minutes of natural ventilation, press the AC button; 4. Close the windows after 1 minute of cooling. Methods for using and maintaining car air conditioning: 1. Avoid setting the temperature too low; 2. Adjust the vent direction properly; 3. Don't use it continuously for extended periods; 4. Occasionally use higher fan speeds; 5. Turn off AC during low-speed driving. The main components of a car AC system are: compressor, condenser, evaporator, receiver-drier, and expansion valve.

Was this review help?
1
2
Share
SanLandon
08/13/25 5:42pm

In summer, the one thing I can't do without while driving is the air conditioning, especially during those scorching commutes! Don't turn on the AC immediately after getting in the car. First, roll down all the windows to ventilate for a minute and expel the hot air, then close the windows, start the engine, and hit the AC switch. Setting the temperature between 24 to 26°C is just right—don’t be greedy and crank it below 20°C to avoid catching a cold from the drastic temperature change when exiting the car. Adjust the fan speed to medium, start with the external circulation to exchange air, then switch to internal circulation to cool down faster. For automatic models, just press the AUTO button—it intelligently adjusts temperature and fan speed. I also make it a habit to clean the AC filter every month; a clogged filter can accumulate dust and blow out unpleasant odors! Long drives with the AC on might make you drowsy, so remember to play some music or take a 5-minute break to turn off the AC and get some fresh air—balancing safety and energy efficiency.

Was this review help?
9
2
Share
Expand All
StMaximus
10/08/25 2:38am

When it comes to summer car usage, I believe the air conditioning should be used wisely for both fuel efficiency and comfort. First, open the windows to dissipate heat, especially after the car has been exposed to the sun. Let the hot air escape for three to four minutes before closing the windows and turning on the AC. Manually setting the temperature to 25-26°C is sufficient—too high won't cool you down, and too low wastes fuel. Start with the external circulation mode to purify the air inside the car, then switch to internal circulation after about ten minutes for better energy efficiency. Cars with automatic AC are super convenient—just press the AUTO button and forget about it. Avoid directing cold air straight at your face or children to prevent catching a cold. Remember to check the filter every season; a dirty one can reduce cooling efficiency. Keeping the AC at a comfortable temperature while driving helps reduce fatigue, and I always carry a bottle of water to stay hydrated.

Was this review help?
1
4
Share
Expand All
Alves
11/21/25 3:57am

I prioritize environmental protection while driving. In summer, I avoid turning on the air conditioner immediately and instead roll down the windows to let the heat escape for two minutes. After starting the engine, I set the temperature to the balanced point of 24-26°C, avoiding excessively low settings to reduce emissions and fuel consumption. I keep the fan speed at medium or use automatic adjustment, and maintain fresh air circulation with the external air circulation mode. Regular cleaning of the air filter improves efficiency; otherwise, cooling becomes slower and adds extra burden. For automatic models, using the AUTO function is convenient and hassle-free. Keeping the cabin temperature within a comfortable range helps avoid significant temperature differences that could reduce focus, ensuring safer and more energy-efficient driving.

Was this review help?
2
0
Share
Expand All
More Forum Discussions

How to Replace the Electronic Rear Brake Pads on a Great Wall H6?

Before replacing and installing the brake pads on a Great Wall Haval H6, first prepare a dedicated set of tools. Use the tools to remove the tire. After removing the tire, you can see the brake disc and caliper. Remove the two screws on the inner side of the caliper, then take off the caliper. Remove the old brake pads. The outer brake pad can be removed by pulling it to the right, the rear brake pad by pulling it backward, and the front brake pad by pulling it left or right. After removing the old brake pads, install the new ones. Once the new brake pads are installed, reattach the caliper and secure it, then reinstall the tire. The entire brake pad replacement process is now complete.
7
5
Share

How to Remove the Steering Wheel on a Changan CS75?

Prepare the tools for removing the steering wheel. Generally, there are two types of tools available for this task. The two sets on the left can be used to remove the pulley, while the one on the right is a specialized tool for steering wheel removal. If the vehicle is equipped with an SRS (Supplemental Restraint System), it is advisable to seek professional assistance for safety. If you decide to proceed on your own, first deactivate the SRS system before removing the airbag. Start by removing the outer cover of the steering wheel. If there are no screws on the back, apply a bit of force to detach the cover. After removing the necessary components, you will likely see 2-3 screw holes around the central bolt. These are used for steering wheel removal. Set up the removal tool and secure the two screws. You can use a standard wrench to turn them, which will eventually force the steering wheel out.
6
0
Share

How to Open the Hood of a Cavalier?

The method to open the hood of a Cavalier is: Pull the release lever inside the engine compartment (located on the panel above the driver's left foot), then move to the front of the vehicle below the emblem and flip the secondary hood release to open the engine hood. The Cavalier is a compact 4-door 5-seater sedan with body dimensions of 4474mm in length, 1730mm in width, 1471mm in height, a wheelbase of 2600mm, and a fuel tank capacity of 36 liters. It is equipped with a 1.0T turbocharged engine and a 6-speed automatic transmission, delivering a maximum power of 92 kilowatts and a maximum torque of 180 Newton-meters. The drivetrain is front-wheel drive, with MacPherson strut front suspension and a torsion beam rear suspension.
18
5
Share

How to Use a Car Magnetic Phone Mount?

Locate a suitable position in the front row of the vehicle to install the mount. This position should be convenient for the driver to view and access, and should not interfere with other vehicle functions. After finding the position, use the provided wipe from the kit to clean the area, then use the provided dry wipe to clean it again. Remove the adhesive film from the spherical base and stick it onto the cleaned position. Be sure to press firmly with your hand for about 15 seconds. Once installed, attach the magnetic disc onto the sphere. When in use, bring the metal plate on the back of your phone close to the disc on the sphere to secure it magnetically.
15
3
Share

Why is the fuel consumption of the 2021 Excelle so high?

Excessive engine carbon buildup is a significant reason, primarily due to the use of unsuitable fuel. Once the oxygen sensor is damaged, it will cause an imbalance in the engine's fuel-air mixture, leading to a sudden increase in fuel consumption. The oxygen sensor should be replaced immediately if damaged. The oil filter, air filter, and fuel filter must be replaced regularly. Failure to replace them for an extended period will result in incomplete fuel combustion and increased engine carbon buildup. You can add fuel cleaner additives, and it's best to drive on the highway for a while, as this helps increase exhaust flow and allows stronger airflow to remove larger carbon particles.
19
4
Share

Where is the hazard warning light switch located?

The hazard warning light switch is located on the center console, marked with two overlapping red triangles. Turn on hazard lights during rain to alert other vehicles of your presence. In case of emergency breakdown while driving, activate hazard lights along with headlights and use horn signals.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.