What is the correct way to use a car battery?

1 Answers
Victoria
07/29/25 11:47pm
Here are the precautions for using a car battery: 1. If a battery remains unused for a long time, it will slowly self-discharge until it becomes unusable. Therefore, the car should be started periodically to charge the battery. Another method is to disconnect the two electrodes from the battery. Note that when removing the positive and negative electrode cables from the terminals, the negative cable should be disconnected first, or the connection between the negative terminal and the car chassis should be removed. 2. When the ammeter indicates insufficient charge, the battery should be charged promptly. The battery's charge level can be displayed on the dashboard. If you find the charge insufficient during a trip and the engine stalls and cannot start, as a temporary measure, you can seek help from another vehicle to jump-start your car by connecting the negative terminals and positive terminals of both batteries. 3. The density of the electrolyte should be adjusted according to the standards for different regions and seasons. 4. When the electrolyte level is low, distilled water or a dedicated replenishing fluid should be added. Never use drinking purified water as a substitute, as it contains various trace elements that can adversely affect the battery.
Was this review help?
13
4
Share
More Forum Discussions

How Many Years Can an Electric Vehicle Last?

Electric vehicles can typically last about 5 years, with the exact duration depending on driving habits. The solution for turning off the heating in an electric vehicle is simply to press the car's button control. Below is an introduction to electric vehicles: 1. Introduction: An electric vehicle (EV) refers to a car that uses electrical energy as its power source and is driven by an electric motor, belonging to the category of new energy vehicles. 2. Content: This includes pure electric vehicles (BEV), hybrid electric vehicles (HEV), and fuel cell electric vehicles (FCEV). Due to their relatively smaller environmental impact compared to traditional vehicles, they are widely regarded as having promising development prospects, although the technology is not yet mature. 3. Speed Control: The motor speed control device is designed for functions such as changing speed and direction in electric vehicles. Its role is to control the motor's voltage or current, thereby managing the motor's driving torque and rotation direction.
15
0
Share

What does the 48V Light Hybrid System mean?

Light hybrid systems utilize 48V technology for minor modifications to improve the driving performance and fuel consumption indicators of gasoline-powered vehicles. Here are the relevant details: 1. Definition: The standard voltage of automotive equipment is increased to 48V, which reduces the load on the engine. Components such as the air conditioning compressor and starter motor are switched to electric drive. By incorporating an electric motor and battery pack, the energy recovery capability of the battery is further enhanced. When the vehicle starts or comes to a brief stop, it switches to pure electric mode, avoiding the high fuel consumption associated with engine starts. 2. Hybrid Vehicles: Hybrid electric vehicles, also known as composite power vehicles, are equipped with more than one power source: storage batteries, fuel cells, solar cells, or generator sets of internal combustion engine vehicles. Currently, composite power vehicles generally refer to those with an internal combustion engine generator combined with storage batteries.
5
4
Share

What Symptoms Occur When Brake Pads Have Problems?

Symptoms of problematic brake pads: 1. Brake pedal not returning: This phenomenon occurs when the brake pedal does not return to its original position or does so slowly after being pressed. The main cause is usually the jamming of the wheel cylinder piston due to dirt. Simply cleaning the wheel cylinder piston can resolve this issue, but ensure that the air in the brake lines and brake fluid is completely purged afterward. 2. Soft brake pedal: This symptom is caused by insufficient brake fluid, thinning of brake discs and pads, air in the brake lines, or deteriorated brake fluid. The most common causes are deteriorated or insufficient brake fluid. 3. Noise during braking: When the brakes are applied while driving, the brake system may emit a sharp metallic friction sound (very harsh). This could be due to thinning brake pads, poor-quality brake pads, foreign objects in the brake pads, or rust on the brake discs. In most cases, pressing the brakes a few more times can alleviate the noise.
19
3
Share

What does the SS indicator on the car dashboard mean?

The dashboard SS light is the auto start-stop indicator. When the auto start-stop light is illuminated, it indicates that the vehicle's auto start-stop function is activated. If there is no auto start-stop indicator light, it means the auto start-stop function is deactivated. Below is relevant information about the auto start-stop function: 1. The auto start-stop function is enabled by default. Therefore, each time the vehicle is started, the auto start-stop function will be activated. Some vehicle models support turning off the auto start-stop, while others do not allow deactivation of this feature. 2. For models that can disable auto start-stop, there is usually a dedicated button. The location of the auto start-stop switch varies across different vehicle models. This button is typically found in one of two positions: either below the engine start/stop button or near the gear lever. 3. The auto start-stop button icon features: an open circle with a small arrow on it, containing the letter A inside the circle. This symbol represents the auto start-stop icon.
11
3
Share

How long does idling take to fully charge the car battery?

Idling the car for 20 minutes can fully charge the battery. Here is some information about car idling: 1. The purpose of car idling: Idling is an operating condition of a car, where the engine runs in neutral gear. The engine speed during idling is called idle speed. The idle speed can be adjusted by changing the throttle size. Idling means the engine is "producing power without doing work." When the engine is running, if the accelerator pedal is completely released, the engine is in an idling state. 2. Reasons for unstable idling: Direct causes refer to mechanical parts being dirty, worn, or incorrectly installed, leading to changes in cylinder power, resulting in an imbalance of power among cylinders and causing unstable idling. Indirect causes refer to abnormalities in the engine's electronic control system, leading to poor combustion of the air-fuel mixture, making it difficult to balance the power among cylinders and causing unstable idling.
8
1
Share

What are the maximum and minimum speed limits on a four-lane highway?

If driving on a four-lane highway, the speed division for vehicles is as follows: when in the leftmost lane, the speed should be between 110 km/h to 120 km/h; when driving in the second or third lane, the speed should be between 90 km/h to 110 km/h; when driving in the rightmost lane, the speed can be below 90 km/h but not lower than 60 km/h. Below is more detailed information: 1. For a three-lane road in the same direction, when a vehicle is in the leftmost lane, the speed should be between 110 km/h to 120 km/h, which is considered the overtaking lane; 2. When driving in the middle lane, the speed should be between 90 km/h to 110 km/h, which is the standard driving lane; 3. When driving in the right lane, the speed should be between 60 km/h to 100 km/h, typically designated for trucks; 4. The rightmost emergency lane should not be entered unless there is an emergency.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.