What is the correct way to start an automatic transmission car?

What Causes Idle Shaking?

The causes of idle shaking are: 1. Throttle blockage, carbon buildup, or abnormal opening; 2. Carbon buildup or blockage in the fuel injector; 3. Spark plug burning or damage; 4. Use of low-quality gasoline leading to fuel pump blockage; 5. Incomplete combustion of the air-fuel mixture in the cylinder. Idle is an operating condition of a car, referring to the engine running in neutral gear. The solutions for idle shaking are: 1. Check fuel pressure and replace components if necessary; 2. Replace engine mounts or other aging parts; 3. Clean the fuel system and check if the idle control valve needs carbon cleaning; 4. Check if the spark plugs have excessive carbon buildup and replace them if needed.

10

2

Share

Where is the air filter of Land Rover Discovery 4 located?

Land Rover Discovery 4's air filter is located in the glove compartment on the passenger side. The functions of the air filter are: 1. To separate dust, pollen, and abrasive particles from the air; 2. To ensure clean air in the cabin and prevent bacterial growth. The dimensions of the Land Rover Discovery 4 are: length 4835mm, width 1920mm, height 1940mm, with a wheelbase of 2885mm. The Land Rover Discovery 4 is equipped with a 2.7T turbocharged engine, with a maximum power of 140 kW and a maximum torque of 440 N·m, paired with a 6-speed automatic transmission. It uses air suspension for both front and rear suspension types.

9

5

Share

Can the Golf use 92-octane gasoline?

The suitability of 92-octane gasoline for the Golf depends on the engine type: 1. Models equipped with turbocharged engines require 95-octane gasoline; 2. Models with naturally aspirated engines can use 92-octane gasoline. The Golf has a body size of 4296mm in length, 1788mm in width, and 1471mm in height, with a wheelbase of 2636mm. It features a 51-liter fuel tank capacity and a 380-liter trunk capacity. The Golf is powered by a 1.2T engine, delivering a maximum power of 85 kW at 5000 rpm and a maximum torque of 200 Nm. It is paired with a 7-speed dual-clutch transmission. The front suspension is a MacPherson strut independent suspension, while the rear suspension is a torsion beam non-independent suspension.

17

1

Share

What is the 0-100 km/h acceleration time of the 5.0L Mustang?

According to official data, the 5.0L Mustang has only one displacement variant, with a 0-100 km/h acceleration time of 4.8 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque, in layman's terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in naturally faster acceleration. For example, the BMW Z4 has a maximum torque of 320 Nm and a 0-100 km/h acceleration time of 6.7 seconds; whereas the Mustang's 5.0L naturally aspirated engine delivers 466 horsepower and 556 Nm of maximum torque, achieving a 0-100 km/h acceleration time of 4.8 seconds. Transmission efficiency: The transmission, as the medium for power delivery, inevitably involves power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Ford Mustang is equipped with a 10-speed automatic transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is referred to as the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. The BMW Z4's power-to-weight

19

2

Share

What engine is equipped in the Haval H7?

Haval H7's engine is independently developed and produced by China's Great Wall Motors, belonging to a domestically manufactured engine. The engine model of Haval H7 is GW4C20A, with a maximum power of 167kW, maximum horsepower of 227, and maximum torque of 385 N·m. For daily maintenance of the Haval H7 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional devices of the intake and exhaust system and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil based on mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, causing various problems to the engine. To avoid faults, change the oil regularly according to usage conditions and keep the oil volume moderate. When the oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, it will either burst the filter element or open the safety valve, passing through the bypass valve and bringing contaminants back to the lubrication parts, accelerating engine wear and internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.

19

0

Share

How Often Should the Brake Discs on a Chevrolet Cruze Be Replaced?

The brake discs on a Chevrolet Cruze should be replaced approximately every 100,000 kilometers. Here is some relevant information about brake discs: 1. Braking Principle: A brake disc is a round disc that rotates as the vehicle moves. The brake caliper clamps the brake disc to generate braking force. When you press the brake pedal, the caliper clamps the disc to slow down or stop the vehicle. 2. Advantages of Brake Discs: They are less likely to experience brake fade and failure during continuous braking. Disc brake systems respond quickly and can perform high-frequency braking actions, making them more suitable for ABS system requirements.

2

1

Share

What is the correct way to start an automatic transmission car?

What Causes Idle Shaking?

Where is the air filter of Land Rover Discovery 4 located?

Can the Golf use 92-octane gasoline?

What is the 0-100 km/h acceleration time of the 5.0L Mustang?

What engine is equipped in the Haval H7?

How Often Should the Brake Discs on a Chevrolet Cruze Be Replaced?

What are the differences between the Touareg and Touareg X?

Where to Check the Tire Pressure Monitoring on BYD Song Pro?

How far can the Volkswagen Lavida go when the fuel gauge shows 0?

What brand does the vv5 belong to?