What is the correct way to perform an emergency brake with a manual transmission?

1 Answers
DiSabrina
07/29/25 3:41pm
The correct way to perform an emergency brake with a manual transmission is: depress the clutch pedal and firmly apply the brakes to bring the vehicle to a rapid stop. During driving, it is essential to carefully observe the road ahead, maintain high concentration, anticipate potential situations, and try to avoid emergency stops whenever possible. A manual transmission is a type of gearbox that utilizes the principle of leverage to amplify engine torque through the largest diameter gear in the lowest gear, assisting the vehicle in starting forward movement. Its function is to change the transmission ratio, expanding the range of torque and speed variations in the driving wheels to adapt to frequently changing driving conditions.
Was this review help?
11
1
Share
More Forum Discussions

Is the 1.5L Engine of the Mazda 3 Powerful Enough?

The 1.5L engine of the Mazda 3 is sufficiently powerful. Below are the details regarding the power and other related specifications of the Mazda 3's 1.5L engine: Power of the Mazda 3's 1.5L Engine: The Mazda 3 is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 117 PS, a maximum power output of 86 kW, and a peak torque of 148 Nm. It is paired with a 6-speed manual transmission. Other Related Specifications: The Mazda 3 is classified as a compact car, with body dimensions of 4662mm in length, 1797mm in width, and 1445mm in height. It has a wheelbase of 2726mm and a fuel tank capacity of 50 liters. The front suspension features a MacPherson strut independent suspension, while the rear suspension utilizes a torsion beam non-independent suspension.
18
1
Share

What Should Beginners Pay Attention to When Buying a Used Car?

Beginners should pay attention to the following points when purchasing a used car: 1. Choose a reputable dealer: It's important to buy from a reputable dealer so that any issues after purchase can be effectively resolved. Also, be cautious about online used car websites—while they can be trusted, don't rely on them entirely. 2. Pay attention to the mileage: This is mainly relevant for retired fleet vehicles. These vehicles not only have mileage issues but also problems with their service life. Commercial vehicles are mandatorily scrapped after eight years, so when you get one, it may only have a year or two of usable life left. 3. How to choose a car: After considering the purchasing channels, here's how to select a car: First, browse online to see if there are any models you like, then compare prices on different websites (for reference only). Once you've made a selection, visit a used car market to look around and see if you can find the model you're interested in.
7
5
Share

What is the maximum speed of the Langdong?

The maximum speed of the Langdong is 195km/h. Significance of maximum speed: It refers to the maximum driving speed that a car can achieve under windless conditions on a level, good asphalt or concrete road surface. The maximum speed provided here is data supplied by the manufacturer, for reference only, and does not represent PCauto's actual test data. Testing method for maximum speed: The last 500 meters of a 1.6-kilometer test section are used as the test area for maximum speed, with four round trips conducted, and the average value is taken. The maximum speed is different from the theoretical maximum speed (which refers to the best performance achieved by the engine under optimal conditions, limited to theory). For some high-performance cars, manufacturers often use technical means (such as electronic speed limit functions) to limit the vehicle's maximum speed to protect the engine or comply with traffic regulations. For example, the Mercedes-Benz S600, when the electronic speed limit is removed, can exceed the limited 250km/h and reach 300km/h or even higher.
12
3
Share

How to Conduct the Annual Inspection of Driver's License Now?

2021 annual inspection new regulations have the following updates: 1. Expanded scope of motor vehicle exemption from inspection: On the basis of exempting non-operational small and mini passenger vehicles with 6 seats or fewer from inspection within 6 years, non-operational small and mini passenger vehicles with 7 to 9 seats (excluding minivans) are now included in the exemption scope. For non-operational small and mini passenger vehicles (excluding minivans) older than 6 years but less than 10 years, the inspection frequency is adjusted from once a year to once every two years. Nationwide, more than 170 million private car owners will benefit from this reform. Vehicles involved in fatal accidents or illegally modified and penalized according to the law will still undergo inspections as per the original cycle to ensure vehicle safety performance. 2. Relaxed age limit for small car driver's license applications: To better meet the new demands of an aging society, the age limit of 70 years old for applying for a small car, small automatic transmission car, or light motorcycle driver's license has been removed. For applicants over 70 years old, additional tests on memory, judgment, and reaction abilities will be required to ensure their physical condition meets safe driving requirements.
9
2
Share

What is the tutorial for replacing the battery in an old Mercedes-Benz GLB key?

Mercedes-Benz GLB key battery replacement tutorial is as follows: 1. Gently press the small switch on the back of the key to remove the mechanical key. 2. Press the key back cover opening button on the back of the key to remove the back cover. 3. The old battery is located on the left side of the key, and the battery compartment can be opened with a gentle push. 4. Remove the old battery and insert the new one, ensuring the "+" side faces up. 5. Reassemble the key in reverse order and test whether functions like the lock button work properly. The lifespan of a Mercedes key battery is generally two years, while the original factory battery can last up to six years. When the key battery is low, the Mercedes vehicle will provide two types of alerts: one is when pressing the ignition switch, the dashboard will display a message to replace the key battery. The second is when pressing the lock or unlock button on the key - if the indicator light on the key becomes dim or doesn't light up, it's time to replace the key battery.
19
2
Share

What Causes the Brake Pedal to Be Hard to Press When Starting the Car?

When starting the car, the brake pedal being hard to press may be caused by a leak or malfunction in the car's vacuum booster pump. Here are several solutions for car brake failure: 1. Repeatedly press the brake pedal to increase the chance of recovery: If you encounter brake failure, repeatedly press the brake pedal several times. This will apply pressure to the braking system with air in the oil pipes, and with repeated pressing, there is a chance to restore braking force. 2. Use the handbrake for braking: If it's a mechanical handbrake, slowly pull it up to gradually increase braking force. Suddenly pulling the handbrake with excessive force can cause the rear wheels to lock, leading to dangerous skidding. If it's an electronic handbrake, it can also be operated, but extra attention should be paid to steering control. Simultaneously, downshift gradually to utilize the engine's braking effect to reduce speed. 3. Friction braking by deceleration: Check for objects on either side that can be used for collision. Remember not to crash head-on. Hold the steering wheel firmly and use multiple slight collisions to forcibly reduce the speed.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.