What is the correct way to operate the clutch in Subject 2 of the driving test?

1 Answers
VanRonan
07/30/25 7:50am
Correct method for operating the clutch in Subject 2 of the driving test: 1. When stopping, first determine the parking position, lift the accelerator pedal in advance, turn on the right turn signal, and simultaneously press the brake pedal. Gradually increase the force when pressing the brake pedal. When the vehicle speed drops to a lower level, depress the clutch and control the brake pedal to stop at the intended parking spot. 2. After getting into the car, first test the pedal feel by pressing it several times to sense the position where the pedal springs back, which is the semi-engagement point. 3. When lifting the clutch, reach this position and keep your foot steady. Slowly lift and control the pedal position to ensure a smooth start or reverse movement of the car.
Was this review help?
6
2
Share
More Forum Discussions

What is the name of the protective plate under the car?

It is called the engine underguard. More extended information is as follows: Introduction to the engine underguard: The engine underguard is a protective plate installed at the bottom of the engine. Its main function is to prevent the engine from being damaged due to impacts when driving on bumpy roads. It is a custom-designed engine protection device tailored for various car models. Its primary purpose is to prevent mud from covering the engine, and secondly, to avoid engine damage caused by impacts from uneven road surfaces during driving. Through its design, it extends the engine's service life and prevents car breakdowns due to external factors damaging the engine. Functions of the car underguard: Keeps the engine compartment clean, prevents road water and dust from entering the engine compartment, and protects the engine from being struck by hard objects like sand and stones kicked up by the tires during driving.
18
4
Share

Why does the outside of the car glass fog up when the AC is on?

The reason for fog forming on the outside of the car glass when the AC is on is that the temperature inside the car is much lower than the outside temperature. When moisture in the outside air comes into contact with the very cold windshield, it condenses into fog. Here is relevant information: Solution: First, you can use the windshield wipers since the fog is on the outside of the glass, where the wipers can be effective. If the fog is heavy and the wipers don't help much, you can also use warm air to blow on the windshield. Adjust the AC temperature to produce warm air, increase the temperature for automatic AC, rotate the direction switch to direct air toward the glass, and the fog will disappear shortly. This happens when the temperature is set too low or the outside weather is humid. Generally, it's best to use the recirculation mode with the AC vents directed toward the feet and head.
15
2
Share

Does a newly replaced car battery need to be charged?

Newly replaced car batteries need to be charged. While new batteries come with some charge from the factory, it's usually not at full capacity, so they can be used directly without charging. However, if the new battery has been sitting for a while, it will naturally discharge over time even without use, potentially leaving it with insufficient charge, in which case charging is necessary. A car battery is a device that converts chemical energy directly into electrical energy. It's designed as a rechargeable battery that achieves recharging through reversible chemical reactions, typically referring to lead-acid batteries. As a type of secondary cell, it uses external electrical energy during charging to regenerate internal active materials, storing electrical energy as chemical energy. When discharging is needed, it converts the chemical energy back into electrical energy output, similar to commonly used devices like smartphone batteries.
7
3
Share

Where is the welcome light button on the Cadillac XT5?

The welcome light button of the Cadillac XT5 is integrated with the headlight switch, located on the turn signal lever on the left side of the steering wheel. The welcome light serves two purposes: one is for illumination, and the other is to remind pedestrians and vehicles in front and behind to pay attention to safety. Another function of the welcome light is car decoration, as the original welcome light is relatively monotonous, so many people like to modify the car's welcome light to enhance its aesthetic appeal while retaining its original functions of illumination and pedestrian reminder. The Cadillac XT5 is a four-door, five-seat SUV with a body length, width, and height of 4812mm, 1903mm, and 1680mm respectively, a wheelbase of 2857mm, and a trunk capacity of 584 liters. The second-row seats support a one-touch folding function, allowing the trunk space to be expanded to a maximum of 1634 liters.
19
3
Share

Does the 6-year exemption for new vehicle inspections include the 6th year?

The 6-year exemption for new vehicle inspections does not include the 6th year. Vehicles must undergo an on-site inspection in the 6th year. The 6-year exemption only means no on-site inspection is required, but vehicle owners must collect the inspection decal from the traffic management department every 2 years. Vehicles eligible for the 6-year exemption include non-commercial large, compact, and subcompact cars, as well as non-commercial compact and subcompact passenger vehicles. If the vehicle does not fall into these categories, it must undergo on-site inspections as scheduled. Vehicle annual inspection, also known as motor vehicle inspection, varies in terms of inspection items and scope depending on the vehicle's usage. According to the definition of motor vehicle inspection institutions under the evaluation of inspection and testing institution qualification certification, motor vehicle inspections include three categories: motor vehicle safety technical inspection, motor vehicle emission inspection, and comprehensive vehicle performance inspection.
14
2
Share

How to Deal with Brake Noise in Volkswagen Sagitar?

Brake noise in Volkswagen Sagitar is mostly a symptom of brake pad wear. The following are the causes of brake noise and solutions: 1. Cause 1: A sharp noise when braking. Solution: Check the brake pads to see if they are worn out or if there are any foreign objects. If the brake pads are worn out, they should be replaced immediately. If there are foreign objects, remove the brake pads, take out the foreign objects, and reinstall them. 2. Cause 2: A dull noise when braking. Solution: Check the brake caliper to see if there is wear on the sliding pins or if the spring plates have fallen off. If found, replace them immediately. 3. Cause 3: A hissing sound when braking. Solution: Check whether there is any problem with the friction between the caliper, brake disc, and brake pads. 4. Cause 4: A rattling sound when braking. Solution: Check whether the attachments on the brake pads are loose. The best method is to reinforce or replace the brake pads.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.