What is the correct way to hold the steering wheel in Subject 3?

1 Answers
BradyFitz
07/30/25 9:21am
During Subject 3, both hands should be placed lightly on the left and right sides of the steering wheel rim, avoiding a rigid grip. Below is relevant information about Subject 3: 1. Introduction: Subject 3, which includes the road driving skills test and the safety and civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It is the abbreviated term for the road driving skills and safety and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies for different types of vehicles eligible for driving. 2. Expansion: The road driving skills test for Subject 3 generally includes preparation before starting, simulated lighting test, starting, driving straight, shifting gears, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing crosswalks, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving.
Was this review help?
17
2
Share
More Forum Discussions

What is the unladen ground clearance of the Levin?

The unladen ground clearance of the Levin is 105mm. Ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the car is fully loaded and stationary. The Levin is a compact 4-door, 5-seater sedan with the following body dimensions: length 4640mm, width 1780mm, height 1455mm, and a wheelbase of 2700mm. The Levin is equipped with a 1.2T turbocharged engine and a CVT continuously variable transmission, delivering a maximum power of 85 kW and a maximum torque of 185 Nm. It features front-wheel drive, with a MacPherson strut independent suspension at the front and an E-type multi-link independent suspension at the rear.
2
5
Share

What is the Difference Between Monocoque and Body-on-Frame Chassis?

The differences between monocoque and body-on-frame chassis are: 1. Different vehicle applications: Monocoque chassis are used in sedans or urban SUVs; body-on-frame chassis are used in off-road vehicles. 2. Structural differences: A monocoque chassis means the vehicle has no rigid frame, only reinforced sections at the front, side panels, rear, and floor; body-on-frame chassis have the vehicle body suspended on the frame with elastic elements for connection. Characteristics of monocoque chassis include: high body strength, with the steel structure providing excellent rigidity; characteristics of body-on-frame chassis include: no frame, reducing overall vehicle weight, lower center of gravity, and stable highway driving.
8
3
Share

Are Car Coolant and Antifreeze the Same?

Car coolant and antifreeze are not the same. Coolant is equivalent to water plus antifreeze. Water is a low-grade coolant and is seasonally limited, while antifreeze includes coolant, but coolant does not include antifreeze. The full name of coolant is antifreeze coolant, which is a coolant with antifreeze function. It can protect the engine's cooling system, improve heat dissipation, enhance engine efficiency, and extend service life. Antifreeze is a type of coolant containing special additives, mainly used in liquid-cooled engine cooling systems. It has excellent performance features such as preventing freezing in winter, preventing boiling in summer, and offering year-round protection against scale and corrosion.
16
0
Share

Does the ETC device require power supply?

There are two types of ETC devices: one is solar-powered, and installing this type of ETC does not require charging as it uses its own built-in power source. The ETC electronic tag consumes power, but it generally does not need to be charged during normal use because there is a solar panel on the back that can recharge itself. During installation, it is necessary to avoid the black areas on the windshield. The other type requires charging, and if it is not used frequently, it is recommended to charge it every two to three months. ETC stands for Electronic Toll Collection, which means electronic toll system. To apply for ETC, you need to provide the original and photocopies of the vehicle owner's valid ID card and vehicle registration certificate. If the application is not made by the owner, the agent's valid ID card is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. Additionally, a bank card for deducting highway tolls is needed. Applicants must be between 18 and 60 years old, and the vehicle must be registered under an individual's name. For company vehicles, the required documents include: An introduction letter from the vehicle owner (with official seal); photocopy of the organization code certificate or business license (with official seal); original ID card of the agent; original vehicle registration certificate; and the vehicle that needs to apply for ETC. Benefits of installing ETC: Saves time: eliminates the hassle of waiting in line; Green and eco-friendly: reduces carbon footprint as vehicles pass through toll stations without stopping, minimizing noise and exhaust emissions; Reduces wear and tear: lowers costs by decreasing the frequency of vehicle starts and stops, reducing wear and fuel consumption. Users can also enjoy toll discounts; Improves efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC more advanced, faster, and high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. Here are some precautions for installing ETC: Do not obstruct the driver's view; it is best to install it behind the rearview mirror. Many car models have windshields with a steep angle, which can reduce the driver's field of vision. If ETC installation does not consider this, it may increase blind spots. Installing it behind the rearview mirror on the right side can avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not need to be charged or have its battery replaced because it has a solar panel on the back for self-charging. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-tamper rod connected to a switch. After installation, the windshield will press the anti-tamper rod in. If the device is removed arbitrarily, the rod will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This feature is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters to avoid automatically paying for the vehicle ahead. The speed limit for ETC lane recognition is 20 km/h; driving too fast may result in failure to read the vehicle's device information and lead to failed toll deductions. When using a debit card linked to ETC, insufficient balance may also cause toll deduction failures.
19
0
Share

How to adjust the headlight height on a Golf?

There are several methods to adjust the headlight height on a Golf: 1. Use the central control screen. Navigate to vehicle information in the central control screen, select settings, and find the lighting options to adjust. 2. Use a hex key wrench. Open the engine compartment cover, locate the white plastic knob near the headlight, and adjust the headlight height using the hex key wrench. 3. Use the internal manual adjustment knob. This button allows you to freely adjust the projection height of the headlights. On undulating roads, direct headlight beams may not provide the best driving visibility. Adjusting the headlight height can illuminate the required field of vision ahead on uneven roads, ensuring driving safety.
11
2
Share

What is the correct way to use the Civic's one-button start?

The correct way to use the Civic's one-button start is: 1. When the driver sits in the cockpit, press the start button for the car to perform a self-check; 2. Step on the brake and press the one-button start to ignite the engine; 3. After stepping on the foot brake and shifting to D gear, release the handbrake. The Civic is a compact 5-door, 5-seat hatchback with body dimensions of 4517mm in length, 1799mm in width, 1434mm in height, and a wheelbase of 2700mm. It is equipped with a 1.5T turbocharged engine and a CVT continuously variable transmission, delivering a maximum power of 130 kW and a maximum torque of 220 Nm. The front suspension uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.