What is the correct way to handle a tire blowout on the highway?

2 Answers
JacksonLynn
07/24/25 1:32pm
Highway tire blowout handling method: The first thing to do is to hold the steering wheel firmly with both hands to control the vehicle's direction, drive to the right, and after the vehicle stabilizes, brake slowly and move away from the main lane. Remember not to brake suddenly to avoid the vehicle spinning or overturning due to uneven braking force. Let the speed decrease naturally, and then call for assistance. Tire blowouts are one of the frequent accidents for cars in summer, mostly caused by improper tire maintenance by the owners. Among highway traffic accidents, 10% are caused by tire failures, with tire blowouts accounting for more than 70% of the total accidents caused by tire failures.
Was this review help?
17
3
Share
FranciscoAnn
08/11/25 7:33am
Hey, I've experienced tire blowouts several times on the highway, and that sound is really scary, but the key is to hold the steering wheel steady and avoid sudden turns. You need to slow down gradually, don't rush to hit the brakes, just tap them lightly, and drive to the emergency lane to stop safely. Immediately turn on your hazard lights, and place the warning triangle about a hundred meters behind. It's best to have a spare tire ready, and practicing how to change it beforehand makes things much easier. Remember to check your tire pressure at least once a month, especially before long trips. If the tires are worn out, replace them to avoid accidents on the highway. Mental preparation is crucial—don't panic, take deep breaths, stay calm, and you'll handle it safely. Developing these habits can prevent a lot of trouble.
Was this review help?
17
3
Share
Expand All
More Forum Discussions

What is the Field Training for Subject 3?

Here is a detailed introduction to the field training for Subject 3: Overview: Subject 3, which includes the road driving skills test and the safety and civilized driving common sense test, is part of the motor vehicle driver's license examination. Test Content: The road driving skills test for Subject 3 includes preparation before driving, simulated light test, starting, driving straight, gear shifting operations, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and driving at night.
19
5
Share

What Causes Engine Oil Burning?

Here is an introduction to the causes of engine oil burning: 1. Mechanical wear. Mechanical wear is mainly influenced by factors such as machining precision, fit quality, lubrication conditions, operating temperature, and pressure between mating parts. When the engine operates at high temperatures, the lubricating oil becomes thinner, resulting in poorer oil film quality. 2. Abrasive wear. Abrasives are formed by the mixture of metal impurities in the oil and dust from the air, accelerating the wear of mating parts. Additionally, dust brought in by the intake air adheres to the cylinder wall opposite the intake valve, forming abrasives that wear the cylinder's cross-section into an oval shape, increasing the cylinder clearance and causing oil burning. 3. Corrosive wear. When the engine temperature is low, water vapor in the cylinder forms droplets on the cylinder wall. These droplets react with exhaust gases to produce acidic substances that adhere to the cylinder wall, causing corrosion and leading to cylinder wear. This increases the clearance between the cylinder and piston, resulting in oil burning. 4. Tolerance mismatch. During engine repair, if the tolerance fit between the cylinder and piston diameter of the same group is not properly considered, excessive clearance can occur, leading to oil burning.
4
4
Share

What is the minimum speed for overtaking in Subject 3?

Subject 3 overtaking speed cannot be lower than 30km/h. Below are specific details about Subject 3: Overview: Subject 3 includes the road driving skills test and the safe and civilized driving knowledge test, which are part of the motor vehicle driver's license assessment. Test Content: The road driving skills test for Subject 3 includes preparation before driving, simulated light test, starting, driving straight, gear shifting operations, changing lanes, pulling over, driving straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and night driving.
11
5
Share

Is Traffic Duty Required for Subject 3?

Subject 3 requires traffic duty. Below are the specific details regarding precautions for traffic duty during the driving test: Traffic Duty Requirements: Before taking the driver's test, candidates must participate in at least 2 hours of traffic violation counseling, with a total duty duration of 4 hours required to schedule the test. During duty, candidates should correct and stop traffic violations by pedestrians and non-motorized vehicles, guiding the public to comply with traffic regulations and develop safe and civilized traffic habits. Duty Regulations: Candidates can independently choose the duty location and time, and must arrive on time with a valid ID. Upon arrival, they should actively show the successful reservation QR code to the officer to check in and receive duty equipment. At the end of the duty, they must request to check out and return the equipment. Late arrivals will be considered absent, and candidates will need to reschedule.
6
1
Share

How many points are deducted for not signaling during a 90-degree turn in Subject 2?

Not using the turn signal during a 90-degree turn or incorrectly using the turn signal will result in a deduction of 10 points. Below are specific details about the 90-degree turn: Assessment Point: The 90-degree turn is an assessment point in Subject 2 of the driver's test. It evaluates the driver's ability to correctly manipulate the steering and accurately judge the difference between the inner and outer wheel paths when driving through sharp turns. Assessment Method: During the 90-degree turn, the candidate must control the vehicle to smoothly navigate through the turn without touching the roadside lines or stopping midway. If the candidate stops the vehicle during the test due to improper operation, it will result in an immediate failure.
4
2
Share

What are the evaluation criteria for the reverse parking test in Subject 2?

Subject 2 reverse parking passing criteria include following the designated route and sequence, ensuring the vehicle body does not cross the line, no stopping during the process, successfully reversing into the parking space, and completing the reverse parking within 4 minutes. Below are specific details about reverse parking: Introduction: Reverse parking became a mandatory test item for obtaining a small car driver's license after 2013. It assesses the driver's ability to maneuver the vehicle in a confined space. Reverse parking is a key assessment point in the driver's test, requiring the driver to correctly reverse the vehicle into the parking space from both sides while in motion. Dimensions: The test area is 16m long and 6.83m wide, with the parking space measuring 5.25m in length and 2.31m in width. Evaluation: Failure to follow the designated route or sequence results in disqualification. Disqualification also occurs if the vehicle body crosses the line, fails to enter the parking space, stops during the process, or exceeds the 4-minute time limit without completing the reverse parking.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.