What is the correct way to attach the novice driver sign to a car?

2 Answers
OCorey
09/05/25 4:56am
The novice driver sign should be attached to the rear of the vehicle. New drivers can obtain a free novice driver sign from the traffic police department and must affix or hang it as required. New drivers can collect the sign at traffic violation handling windows of local traffic police stations or vehicle management offices by presenting their driver's license. There are two types of novice driver signs: one is magnetic and the other is suction cup-based. The magnetic sign can be directly attached to the rear exterior of the car, while the suction cup-based sign is attached to the inside of the rear window. Here is additional information: 1. Novice driver sign: It serves as a reminder to others that a new driver is on the road. The main color of the sign is yellow, with orange-red accents. 2. Relevant regulations: According to Article 64, Clause 3 of Order No. 123, drivers in the probationary period must affix or hang a standardized novice driver sign on the rear of their vehicle. 3. Correct attachment method: The traffic police remind that if probationary drivers fail to affix or hang the standardized sign on the rear of their vehicle, if the sign cannot be properly recognized, or if the sign does not meet requirements (such as self-printed signs or signs labeled 'new driver'), it will be considered as not having the sign attached.
Was this review help?
20
5
Share
NoraLynn
09/17/25 5:22am
When I first started learning to drive, I was very careful about placing the novice driver sticker. My instructor emphasized that it must be prominently displayed on the rear of the car, such as the lower center of the rear window or the trunk lid, at a height of about 1 meter from the ground so other drivers can see it clearly. I bought a standard-sized 15cm×15cm magnetic sticker, making sure to clean the car body thoroughly before attaching it to prevent it from falling off. Initially, I placed it too low, almost covering the license plate, but I adjusted it in time to avoid a potential traffic police fine. After putting it on, I felt much safer driving out, as everyone knew to keep their distance from a beginner. Remember, the novice driver sticker should have a yellow background with black lettering, and don’t place it inside the front windshield as it could obstruct your view. Regularly checking its stability is crucial, especially on rainy days to ensure it doesn’t fall off. Once the probationary period ends, you can happily remove it.
Was this review help?
18
5
Share
Expand All
More Forum Discussions

What is the fuel consumption of the Mitsubishi Grandis 2.4?

The fuel consumption of the Mitsubishi Grandis 2.4 is 11 liters per 100 kilometers. Below is extended information about fuel consumption: Factors affecting fuel consumption: The driving habits of the driver, road conditions, the weight of items placed in the car, whether the air conditioning is on, and whether the vehicle is in the break-in period—all these factors can affect the vehicle's fuel consumption. Ways to reduce fuel consumption: Avoid prolonged idling or low-speed driving, avoid overloading the vehicle and keeping the fuel tank full, avoid using high-viscosity engine oil, and try to control speed with the accelerator rather than the brakes. Additionally, filling only half the tank each time you refuel can also reduce the vehicle's weight.
9
0
Share

Can auto-hold be kept on all the time?

Auto-hold is an automatic parking function that can be kept on all the time. Here is an extended introduction about auto-hold: Advantages of the auto-hold function: The auto-hold function can greatly facilitate the driver by preventing the vehicle from rolling backward when stopping in stop-and-go traffic conditions. The owner can keep this function on all the time, which has no negative impact on the vehicle itself. Principle of the auto-hold function: The auto-hold function calculates the precise parking braking force through the tilt sensor controlled by the control panel. When activated, the parking brake control unit uses information from the clutch distance sensor, clutch engagement speed sensor, throttle sensor, etc. to perform calculations. When the driving force exceeds the driving resistance, the parking brake is automatically released, allowing the car to start smoothly.
10
0
Share

Can Hybrid Cars Get Green License Plates in Hangzhou?

Vehicles that are plug-in hybrid electric vehicles (PHEVs) can be registered with green license plates, which are a type of new energy vehicle plate. Below is relevant information about hybrid vehicles: Advantages of hybrid vehicles: Hybrid vehicles have high fuel efficiency and superior driving performance. The engine of a hybrid vehicle uses fuel, and with the assistance of an electric motor during startup and acceleration, fuel consumption can be reduced. Simply put, compared to vehicles of the same size, hybrid vehicles have lower fuel costs. Criteria for green license plate vehicles: New energy vehicle models such as pure electric vehicles or plug-in hybrid electric vehicles can be registered with green license plates. These vehicles have no adverse impact on the surrounding environment during daily driving.
1
3
Share

How Often Should 0w-20 Engine Oil Be Changed?

If using conventional 0w-20 engine oil, it can be changed every 5,000 kilometers or every six months. If using fully synthetic 0w-20 engine oil, it can be changed once a year or every 10,000 kilometers. Below is extended information about engine oil: How to identify synthetic engine oil: Check whether it is labeled as PAO or ester-based engine oil. Only products that use these two raw materials without blending with Group I, II, or III base oils are fully synthetic engine oils. Additionally, if it is PAO or ester-based engine oil, it will definitely be labeled as fully synthetic engine oil. Criteria for selecting engine oil: When selecting engine oil, strictly follow the oil grade specified in the vehicle's user manual. If the same grade is not available, you can use a higher-grade oil, but never use a lower-grade oil as a substitute.
6
3
Share

Can the black roof film applied for several years be removed?

The black roof film applied for several years can be removed. Here are the methods for handling car body film: Heating treatment: Due to prolonged adhesion, the film may age, and when removing the film, adhesive residue may be left on the roof. In severe cases, it may even peel off the car paint. Heating can be used for better results during the removal process. Direct covering: If the dislike for the black roof is the reason, directly covering it with another color roof film is a better solution. This saves time and avoids the need to remove the original roof film. After several years, the film may age, making it very difficult to clean.
7
5
Share

Can a car that requires 95 octane gasoline use 92 octane gasoline?

A car that requires 95 octane gasoline should avoid using 92 octane gasoline whenever possible. Here is an extended analysis regarding gasoline: Hazards of using the wrong gasoline: If a car that requires 95 octane gasoline is consistently fueled with 92 octane gasoline for an extended period, the octane rating of the gasoline used by the engine will fall below the required level. This can lead to engine knocking and potential damage to the engine. Differences in gasoline octane ratings: The octane rating of gasoline is determined by its octane number. Gasoline with a higher octane number has stronger anti-knock properties and consequently a higher octane rating. The anti-knock performance indicator of gasoline is referred to as the octane number, which corresponds to the gasoline octane rating. Generally, engines with high compression ratios require gasoline with higher octane ratings, while engines with low compression ratios can use gasoline with lower octane ratings. This ensures the proper operation of the vehicle.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.