What is the correct way for a car to pass over a speed bump?

What are the reasons for the car not starting and all dashboard lights being on?

The reasons for the car not starting and all dashboard lights being on are: 1. Insufficient battery power; 2. Engine malfunction; 3. Insufficient fuel pressure; 4. Short circuit in the throttle position sensor signal; 5. Poor fuel pump performance; 6. Spark plug failure. The solutions for the car not starting and all dashboard lights being on are: 1. Charge the battery; 2. Inspect and repair the car engine; 3. Replace the throttle sensor; 4. Replace the fuel pump; 5. Replace the spark plugs. The dashboard consists of gauges, indicators, and warning lights/alarms, and its function is to provide the driver with necessary information about the car's operating parameters.

10

0

Share

What Causes the Noise When Turning the Steering Wheel to Full Lock?

Car steering wheel making noise at full lock can be caused by: 1. Hydraulic power steering system malfunction; 2. Planar bearing or top mount failure; 3. Loose or aged power steering belt; 4. Contaminated power steering fluid; 5. Steering gear failure. Solutions for steering noise at full lock: 1. Replace planar bearing or top mount; 2. Tighten or replace power steering belt; 3. Replace power steering fluid; 4. Replace steering gear. The steering system consists of steering control mechanism, steering gear and steering linkage, categorized into mechanical steering system and power steering system. Its function is to ensure the vehicle follows the driver's operation for straight or turning movement.

9

5

Share

What is the usage method of the aoff button?

aoff button usage method is: during power-on ignition, the auto start-stop function is enabled by default. When you do not want to use the auto start-stop function, press the aoff button located on the car's center console to turn it off. The working principle of the aoff button is: 1. By installing a motor with idle start-stop function on the engine, the engine stops when the car meets the idle stop conditions; 2. When the vehicle needs to move forward, the idle start-stop motor system responds to the owner's start command and quickly starts the engine. The function of the aoff button is to help the owner automatically turn off the engine when the car is at low speed or parked, reducing vehicle idle time and minimizing engine carbon deposits.

13

1

Share

What does it mean when a car breaks down?

Car breakdown refers to a situation where a vehicle becomes inoperable due to mechanical failure while driving. Common causes include: 1. Battery depletion; 2. Fuel line burnout; 3. Insufficient hydraulic pressure in transmission lines; 4. Severe wear of transmission second shaft and gear engagement components; 5. Engine overload. Recommended handling procedures for car breakdowns: 1. Activate hazard lights to prevent secondary accidents, and exit the vehicle safely when possible to assess the situation; 2. Move the vehicle to a safe location, avoiding blind spots of other vehicles or dangerous areas like intersections; 3. Set up triangular warning signs to increase visibility for other drivers; 4. Open the trunk and hood as visual warnings; 5. Exit the vehicle with a fire extinguisher; 6. Call for roadside assistance.

17

5

Share

Is the xc60 a domestically produced model?

xc60 is a domestically produced model, which is a mid-size SUV under Volvo Cars. Taking the 2021 Zhi Xing Luxury Edition xc60 as an example, its body length, width, and height are: 4688mm, 1902mm, and 1658mm, respectively, with a wheelbase of 2865mm and a trunk capacity of 483l. The 2021 Zhi Xing Luxury Edition xc60 features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0t turbocharged engine, delivering a maximum horsepower of 190ps, a maximum power of 140kw, and a maximum torque of 300nm.

9

1

Share

Where is the OBD interface of Dongfeng Fengguang 330 located?

The OBD interface of Dongfeng Fengguang 330 is located inside the glove compartment on the passenger side. To use it, you need to remove the plastic panel inside the glove compartment. OBD refers to the On-Board Diagnostics system. When a fault occurs in the vehicle, the warning light on the dashboard will illuminate, and the On-Board Diagnostics system will generate corresponding fault codes, which are uploaded to the vehicle's computer to assist technicians in quickly identifying the issue. The dimensions of Dongfeng Fengguang 330 are 4365mm in length, 1720mm in width, and 1790mm in height, with a wheelbase of 2725mm, front track of 1425mm, and rear track of 1445mm.

12

4

Share

What is the correct way for a car to pass over a speed bump?

What are the reasons for the car not starting and all dashboard lights being on?

What Causes the Noise When Turning the Steering Wheel to Full Lock?

What is the usage method of the aoff button?

What does it mean when a car breaks down?

Is the xc60 a domestically produced model?

Where is the OBD interface of Dongfeng Fengguang 330 located?

What is the method for cleaning a car's front grille?

What are the precautions during the break-in period of a Camry?

What is the function of a compressor?

What are the reasons why a car's steering wheel does not return to center after turning?