What is the correct starting method for the Geely Boyue?

1 Answers
LeCarter
07/30/25 2:45am
Geely Boyue manual transmission car starting steps are as follows: 1. When starting on flat ground, first start the car in neutral, then depress the clutch after starting the car; 2. Shift the gear to first gear, then slowly release the clutch while slightly applying some throttle; 3. When the car reaches the semi-engaged state, release the handbrake. Do not release the clutch too quickly; when you feel the car moving forward, slowly release the clutch completely. Geely Boyue automatic transmission car starting steps are as follows: 1. With the car stationary, first depress the clutch pedal and press the start button to ignite and start the engine; 2. Shift the car into D gear, then release the handbrake, and the car will start moving forward when you release the brake pedal; 3. Releasing the clutch pedal only puts the car in an idle state. To increase speed, gently press the accelerator pedal.
Was this review help?
12
0
Share
More Forum Discussions

How high can the Honda CR-V be submerged in water without issues?

It is generally safe as long as the exhaust pipe does not take in water. Below are relevant details: 1. Principle: Avoid driving if water reaches half the height of the wheels. Wading capability is only a reference—exceeding half the tire diameter means the vehicle may float, causing loss of tire traction. Even if the engine doesn't take in water or stall, the car could drift or encounter other issues. 2. Low air intake inlet: Since the engine air intake inlet is positioned low, water can be sucked into the engine during wading. 3. Exhaust outlet below the waterline: If the exhaust pipe outlet is submerged below the waterline, water may be drawn into the engine through it.
3
0
Share

Differences Between Mazda 323 and Haima Family?

They are the same model. The Haima Family refers to the Familia produced by Hainan Mazda. The Haima Family (Family) was derived from the Mazda Familia, which was a new model in the Mazda 323 series unveiled at the 2000 Paris Motor Show. Boldness and restraint, elegance and dynamism—these are not contradictions but harmony. The Hainan Mazda 323 sedan adopted the design of the Japanese Mazda 323 and was officially introduced into production in 1992. It was equipped with an original 1.6-liter carburetor engine, which was considered a relatively advanced domestic model at the time. The Haima Family refers to the Familia produced by Hainan Mazda. The Haima Family (Family) was derived from the Mazda Familia, which was a new model in the Mazda 323 series unveiled at the 2000 Paris Motor Show.
16
5
Share

Why was the Mazda CX-5 discontinued?

Mainly because this model's cost-performance ratio is not high, and there are too many alternative models available at the same price point, resulting in overall sales not meeting expectations, leading the manufacturer to discontinue production. Below are the details: Overview: The Mazda CX-5 is positioned as a compact SUV with dimensions of 4555/1840/1710 (mm) in length, width, and height, and a wheelbase of 2700mm. Powertrain: The CX-5 is equipped with two SkyActiv-G series naturally aspirated engines: a 2.0L with a maximum power of 114kW and maximum torque of 200Nm, and a 2.5L with a maximum power of 144kW and peak torque of 252Nm, paired with either a 6-speed manual or 6-speed automatic transmission.
16
1
Share

What is the wiring tutorial for a dash cam?

Dash cam wiring tutorial: Route the power cable along the edge of the headliner to the A-pillar, then along the door seal, followed by the bottom of the glove compartment and the inner edge of the carpet. Tuck the power cable along this path and finally plug it into the car's cigarette lighter. Dash cams come in two main types: suction cup-mounted and rearview mirror-mounted. Suction cup dash cams need to be attached to an appropriate location, while rearview mirror dash cams are typically clip-mounted and can be directly fitted over the existing rearview mirror. The primary function of a dash cam is recording, which can help prevent fraud, serve as evidence in accident liability determination, and capture scenic views during travel.
6
5
Share

What does it mean when the car's exhaust warning light comes on?

Reasons for the car's exhaust warning light coming on: 1. Poor quality of gasoline may cause abnormal air-fuel mixture, electronic component failure, and exhaust system abnormalities; 2. Failure of electronic components in the intake and exhaust systems, such as oxygen sensors, carbon canister solenoid valves, mass air flow sensors, electromagnetic control valves on turbochargers, throttle body, or carbon buildup inside the engine; 3. The engine control program may need updating or debugging. Solutions for when the car's exhaust warning light comes on: 1. Start and turn off the vehicle three times in a row, or disconnect the negative terminal of the engine battery for 30 seconds before reconnecting it; 2. Change the gasoline, clean the exhaust system, or update the engine control program.
9
0
Share

What are the details of Xingrui's free maintenance?

There is free maintenance for 4.5 years or 120,000 kilometers. Below are the relevant details: 1. Maintenance items: Its free maintenance items include 12 oil and oil filter changes, 3 transmission fluid changes, 3 coolant changes, 12 air filter changes, 3 spark plug changes, etc. 2. Maintenance categories: A car's maintenance is divided into major maintenance and minor maintenance. The interval for minor maintenance can be every 5,000 kilometers or every 10,000 kilometers, depending on the manufacturer's requirements for the vehicle. Minor maintenance includes fewer items, mainly oil and oil filter changes, along with some other routine checks, replacing items as needed, such as the cabin air filter, etc.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.