
Here are the steps for starting an automatic transmission car: 1. Turn the ignition key to the second position, to the power-on position, for automatic detection, for at least 6 seconds or more. 2. Press the foot brake and shift the gear from P to N. 3. Release the foot brake and turn the ignition key to the start position to ignite the engine. 4. After prolonged parking, it is recommended to warm up the car for 1-2 minutes while stationary. 5. Press the foot brake, shift the gear from N to D, and release the handbrake. 6. Slowly release the foot brake to start moving. Here are the precautions to note when starting: 1. Press the brake pedal before shifting gears and check if the gear lever position is correct. 2. When starting over bumps or steps, press the brake pedal with your right foot, and while the car is stationary, slightly release the right foot and press the accelerator pedal.

I've been driving an electronic gear shift car for several years and found the correct starting method is quite simple, but the key is not to skip steps. First, ensure the gear is in P (Park) when stopping - otherwise, the car simply won't start. Then sit properly, fasten your seatbelt, and firmly press the brake pedal - this step absolutely cannot be skipped because the electronic control system requires the brake signal to respond. After starting the engine or powering on, gently move the gear lever or press the button to D (Drive) position. Don't rush to press the accelerator heavily at this point; slowly release the brake to let the car move forward gently. Pay attention to the side and rearview mirrors to confirm there are no pedestrians or vehicles around before accelerating. I've emphasized this method since teaching my child to drive to avoid sudden movement risks. The advantage of electronic gear shifts is their foolproof operation, but developing good habits ensures greater safety on slopes or in congested traffic. Remember to regularly check the brake system to prevent malfunctions. In summary: press brake, shift to D, release brake to start - a seamless but careful process.

Starting an electronic transmission vehicle requires attention to safety details. Before getting in, I walk around the car to check the tires and surroundings. When starting, stay calm, confirm the gear is in P, and firmly press the brake pedal—without pressing it, the shift button won't work at all. I've seen accidents caused by unintended rolling. After ignition or power-on, shift to D gear and slowly release the brake to allow smooth movement. This process requires controlling the rhythm; starting too quickly might startle pedestrians or yourself. The electronic control system has built-in protection, but a common mistake beginners make is neglecting to observe the environment, leading to rear-end collision risks. Develop the habit of checking mirrors every time you start, enhancing driving comfort. Additionally, electronic components are reliable but susceptible to weather effects, like ensuring the system stays dry on rainy days. In short, the steps are simple: P gear, press brake, shift to D, release brake, but adding safety awareness ensures driving with peace of mind and fuel efficiency.

The electronic gear car starting method is based on intelligent design. In the parked state, the gear is set to P (Park) to lock the transmission. When starting, press the brake pedal to trigger electronic sensors and prevent misoperation. After starting the engine, shift to D (Drive) gear, and the brake controller automatically handles gear changes when released. Compared to manual transmissions, it eliminates the hassle of using a clutch while being safer and more reliable. When driving such vehicles, I appreciate the advantage in response speed, with smooth starts free of jerking, making it ideal for daily commuting. The key point is to avoid negligence on slopes, ensuring the electronic parking brake assistance is effective. With proper maintenance, you can enjoy convenient driving.


