What is the correct start-stop sequence for one-button start?

[Ross]

The correct start-stop sequence for one-button start is: 1. After the driver sits in the driver's seat, press the start button once, at which point the ACC light turns on, then press it once more for the vehicle to perform a self-check; 2. Depress the brake pedal and press the one-button start key to ignite and start the engine; 3. Release the foot brake, and you can choose to warm up the vehicle in place, with the duration depending on the environment; 4. Depress the foot brake again, shift to D gear, and release the handbrake (for electronic handbrakes, simply press the button briefly); 5. Slowly release the foot brake, apply some throttle, and the start is complete. The parking sequence is: 1. Depress the brake pedal to bring the vehicle to a smooth stop; 2. Shift the gear from D to N, and at the same time tighten the handbrake (for electronic handbrakes, pull up the button); 3. Continue to depress the foot brake and shift the gear from N to P; 4. Release the foot brake, press the one-button start key, and turn off the power to complete the parking.

[SanJohn]

I remember falling in love with this one-push start function the first time I drove a car, but now I've finally figured out the correct sequence. Before starting, you must press the brake pedal, then push the start button; when turning off the engine, the car must be completely stopped, with the automatic transmission in P gear, before pressing the button to shut off the engine. This sequence is really important because it protects the transmission and engine. If the order is messed up, like starting without pressing the brake, the car might start directly or roll, which is terrifying. Once, I turned off the engine on a steep slope without putting it in P gear, and the car slid a little—thankfully, I remedied it in time. When driving normally, forming a habit makes it no trouble at all. The same goes for warming up in winter, but don't leave the engine idling for too long.

[LeAsher]

As a novice driver with only one year of experience, I find the one-button start really convenient, but learning the correct sequence is crucial. My instructor taught me to press the brake first and then the start button to ignite the engine; when turning off the car, I must come to a complete stop, shift to the P position, and press the button to shut it down. At first, I often forgot to shift to P, and the shutdown button wouldn't respond, making me think the car was broken. Later, I checked the car manual and realized it's a sequence to protect the circuit system and extend battery life. In summer, before getting in the car, make sure the seatbelt is fastened before operating, and don't rush to press the button. Actually, after practicing a few times, it becomes a habit, and it's easy for beginners to get the hang of it.

[VictoriaMarie]

After dealing with many car issues, I've learned that proper one-button start/stop operation is crucial: To start - press the button while braking; To stop - shift to P gear when parked steadily then press the button. Wrong sequences may cause signal confusion and component damage. Developing good habits prevents mistakes.