What is the correct sequence for turning off a Mercedes-Benz vehicle?

1 Answers
LoganMarie
07/29/25 11:48pm
Mercedes-Benz vehicle's correct shutdown sequence is: 1. Press the brake pedal to bring the vehicle to a smooth stop; 2. Shift the gear from D to N; 3. Engage the parking brake; 4. Release the foot brake but do not turn off the power; 5. Continue pressing the foot brake and shift the gear from N to P; 6. Release the foot brake, press the one-touch start button to turn off the power and complete the shutdown. Models under Mercedes-Benz include: Mercedes-Benz A-Class, S-Class, G-Class, C-Class, Maybach, etc. Taking the Mercedes-Benz C-Class as an example, its body dimensions are: length 4784mm, width 1810mm, height 1457mm.
Was this review help?
19
0
Share
More Forum Discussions

What is the difference in fuel consumption between 4WD and 2WD with the same displacement?

The difference in fuel consumption between 4WD and 2WD with the same displacement is approximately 0.4-0.8 liters. Driving habits: Incorrect driving habits have the greatest impact on fuel consumption. During driving, especially in heavy traffic, at red lights, or when changing lanes, sudden acceleration and hard braking are the most common issues. It was found that when the vehicle enters the test section at a constant speed, fuel consumption can increase by 2 to 3 times compared to driving at a steady speed. Tire pressure: When the tire pressure is too high or too low, the car's fuel consumption will increase. Road conditions: Congested roads or uneven surfaces that force the vehicle to drive in low gear for extended periods will also increase fuel consumption.
10
1
Share

Which lane should motorcycles ride on national highways?

Motorcycles are classified as motor vehicles and should ride in the far-right lane on national highways. Penalties for speeding on national highways with motorcycles: Since motorcycles are motor vehicles, they are subject to the same speeding penalties as other motor vehicles on national highways. Speeding less than 10% results in a warning without points deduction or fine. Speeding between 10% and 20% incurs 3 penalty points and a 200 yuan fine. Speeding between 20% and 50% results in 6 penalty points and a 200 yuan fine. Speeding over 50% leads to an immediate 12-point deduction and a 500 yuan fine, with the fine amount doubling progressively as the speeding percentage increases, capping at 2000 yuan for speeding over 100%. How should motorcycles be parked: As motor vehicles, motorcycles should be parked according to motor vehicle parking standards, in designated areas such as marked parking spaces or parking lots.
10
3
Share

Can New Energy Vehicles Get Regular License Plates?

New energy vehicles can get regular license plates. What are new energy vehicles: New energy vehicles generally refer to models whose primary power source does not solely rely on internal combustion engines. The most distinctive feature of new energy vehicles is that they use electric motors for power, with the electricity supplied by batteries. These batteries can be charged through built-in generators, external charging ports, solar energy, chemical energy, or even nuclear energy. General classification of new energy vehicles: Currently, new energy vehicles on the market can be broadly divided into plug-in hybrid electric vehicles and battery electric vehicles. There is no mandatory requirement for new energy vehicles to use green license plates; they can still opt for blue plates. The first letter of the special license plate for small new energy vehicles is D or F, where D represents battery electric new energy vehicles, and F represents plug-in hybrid new energy vehicles. For large new energy vehicles, the sixth letter of the special license plate is D or F, with D representing battery electric new energy vehicles and F representing plug-in hybrid new energy vehicles.
3
4
Share

What's the Difference Between Three-Cylinder and Four-Cylinder Cars?

In the current automotive market, four-cylinder engine models are the most common. Here are the differences between three-cylinder and four-cylinder cars: 1. Engine: A four-cylinder car has an engine with four cylinders. Common engine displacements like 1.4, 1.5, and 2.0 are mostly four-cylinder engines. A three-cylinder car has an engine with only three cylinders. Common engine displacements like 1.0 and 1.3 are mostly three-cylinder engines. 2. Stability: Four-cylinder cars are significantly more stable than three-cylinder cars. This is because the four-cylinder engine operates with balanced forces, where the power and reaction forces cancel each other out, greatly reducing engine vibration. Three-cylinder engines lack one cylinder, resulting in a moment during operation when the engine is not producing power. This makes the vibration of three-cylinder engines more noticeable, and their stability naturally falls short compared to four-cylinder, six-cylinder, and eight-cylinder engines.
7
2
Share

What is required for reissuing a vehicle license in a different location?

Reissuing a vehicle license in a different location requires: the applicant's ID card (original and copy, and a residence permit if the applicant's household registration is in a different location); a digital photo receipt for the driver's license; a one-inch white-background photo specifically for the driver's license, and other materials. Location for reissuance: Bring your ID card, two recent one-inch white-background color photos without hats, and if the driver's license was issued in a location different from your household registration, also bring a temporary residence permit or residence permit, to the vehicle management office where the driver's license was originally issued to complete the reissuance procedure. Limitations on reissuance applications: During the period when the motor vehicle driver's license is legally seized, detained, or temporarily suspended, the motor vehicle driver may not apply for a reissuance. After the motor vehicle driver has obtained a replacement driver's license, the original driver's license becomes invalid and must not be used further.
13
3
Share

Should the gasoline be replaced if the motorcycle has been parked for several months?

If the motorcycle has been parked for several months, there is no need to replace the gasoline. However, after starting it, you should check the fuel level. If the level is too low, you will need to add more gasoline. Gasoline is a volatile and flammable hydrocarbon mixture liquid derived from the distillation and cracking of petroleum, and it is used as fuel. 90 Octane Gasoline: Suitable for gasoline-powered vehicles with an engine compression ratio below 8.5. 92 Octane Gasoline: Suitable for gasoline-powered vehicles with an engine compression ratio between 8.6 and 9.9. 95 Octane Gasoline: Suitable for gasoline-powered vehicles with an engine compression ratio between 10.0 and 11.5. 98 Octane Gasoline: Suitable for gasoline-powered vehicles with an engine compression ratio above 11.6.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.