What is the correct sequence for gear shifting and acceleration in Subject Three?

Does Canceling Subject 2 Exam Count as One Attempt?

After a vehicle is declared a total loss, it should belong to the insurance company. Here is relevant knowledge about vehicle total loss: Criteria for vehicle total loss: The standard for vehicle total loss is when the vehicle is severely damaged or the actual repair cost reaches or exceeds 80% of the vehicle's actual value. Handling methods for vehicle total loss: Total loss of a vehicle is divided into two situations: one is actual total loss, meaning the vehicle is completely destroyed and cannot be repaired; the other is constructive total loss, meaning although the vehicle can still be repaired, the repair cost reaches or exceeds the vehicle's actual value, making repair valueless and unnecessary, thus it can be treated as a total loss.

14

1

Share

What is the battery model for Toyota Vios?

Toyota Vios uses battery model S95, which is a GS brand battery with a capacity of 70AH 12V. The battery typically used in cars refers to lead-acid batteries. The Vios is an entry-level family car specifically designed by Toyota for the Asian market, based on the NBC platform. It is equipped with a domestically produced 16-valve 5AFE engine. In terms of body dimensions, the Toyota Vios measures 4410mm in length, 1700mm in width, and 1490mm in height, with a wheelbase of 2550mm. The Toyota Vios comes standard with a series of active safety features including VSC (Vehicle Stability Control), TRC (Traction Control System), and HAC (Hill-start Assist Control).

9

3

Share

Why can't new energy vehicles be charged at home?

Reasons why new energy vehicles cannot be charged at home: 1. High battery capacity: Household electricity cannot achieve fast charging for new energy vehicles, mainly due to the high battery capacity and power limitations. Due to the self-weight issue of new energy vehicles, coupled with high driving speeds, this requires the drive motor to have sufficient power. Similarly, to increase the range, the battery capacity must also be increased. 2. Different rated power: The household charging cable configured for the car also requires the use of a 16A air conditioning socket, and the rated charging power is only slightly more than 3kW.

17

1

Share

Is the Audi R8 a mid-engine or rear-engine car?

The Audi R8 is a mid-engine car, with its engine positioned behind the driver and passenger seats but ahead of the rear axle. In contrast, a rear-engine configuration would place the engine behind the rear axle. The Audi R8 is a two-seater sports car, measuring 4441mm in length, 1930mm in width, and 1244mm in height, with a wheelbase of 2650mm. Exterior-wise, the car features highly compact body lines, with the front section seamlessly integrating into the elegantly curved roofline. The side profile showcases Audi's signature design language, where dynamic lines above the wheel arches and side skirts connect the front, side, and rear sections of the vehicle. The transition between the doors and side air intakes creates a particularly striking visual impression.

13

1

Share

What does China 5 and China 6 mean for vehicles?

China 5 and China 6 refer to vehicle emission standards, which regulate the content of harmful gases such as carbon monoxide, PM, and soot emitted from vehicle exhaust. The transition from China 5 to China 6 involves improvements in intake and exhaust efficiency, exhaust gas recirculation efficiency, etc., with the ultimate goal of reducing the levels of harmful gases. More detailed information is as follows: 1. The China 6 emission standard is an upgraded version of the current China 5 standard, imposing stricter limits on the emission of CO (carbon monoxide), THC (total hydrocarbons), NMHC (non-methane hydrocarbons), NOX (nitrogen oxides), and PM (particulate matter). It also introduces new regulations on PN (particulate number). According to estimates, under the China 6 standard, light gasoline vehicles will see a reduction of approximately 50% in CO, HC, NMHC, and NOX emissions compared to the China 5 stage, with particulate emissions reduced by about 40%. For heavy-duty diesel vehicles, NOX and particulate emissions will be reduced by more than 60% compared to the China 5 stage. 2. In addition to stricter emission requirements, the cold-start test cycle has been adjusted from the NEDC cycle under China 5 to the WLTC cycle under China 6, leading to an increase in actual emissions. Starting from July 1, 2023, the dual-idle test will be replaced with a real driving emissions (RDE) test, resulting in higher exhaust emissions. Given that vehicle exhaust accounts for 20% to 40% of air pollution in first-tier cities, implementing the China 6 standard can lead to a noticeable improvement of over 10% in urban air quality.

2

5

Share

Under what circumstances does the front radar work?

Front radar working conditions are as follows: 1. When an obstacle is detected in the front radar detection zone, the instrument panel will immediately display the radar status interface indicating the obstacle position and alert you with an alarm sound. 2. When the obstacle leaves the front radar probe detection zone for 4 seconds, the combination instrument will switch from the radar status interface back to the trip computer interface. 3. When you start driving the vehicle and the speed is below approximately 12km/h, the front radar remains active. When the speed exceeds 12km/h, the front radar stops working. 4. After the front radar stops working, if the speed drops back below 12km/h, the front radar will remain in the off state. To reactivate the front radar at this time, you need to shift the gear from D to P or R, and then back to D, after which the front radar will turn on again. Differences between front radar and rear radar: 1. Front radar: The front radar probe is installed on the front bumper, radiating at approximately a 45-degree angle to search for targets in all directions. Its greatest advantage is the ability to detect obstacles below the bumper that are difficult for the driver to see from inside the car, such as flower beds or playing children, and provide an alarm. 2. Rear radar: Also called the reversing radar, the probe is installed on the rear bumper. When the gear lever is shifted into reverse, the reversing radar automatically starts working. When the probe detects an object behind the vehicle, the buzzer emits a warning. As the vehicle continues to reverse, the frequency of the alarm sound gradually increases, eventually becoming a continuous tone.

15

4

Share

What is the correct sequence for gear shifting and acceleration in Subject Three?

Does Canceling Subject 2 Exam Count as One Attempt?

What is the battery model for Toyota Vios?

Why can't new energy vehicles be charged at home?

Is the Audi R8 a mid-engine or rear-engine car?

What does China 5 and China 6 mean for vehicles?

Under what circumstances does the front radar work?

How is the Song PLUS EV?

What to Do When Smelling a Burnt Odor During the New Car Break-in Period?

How to Remove the Adhesive Residue After Peeling Off Car Window Film?

Where is the fuse box located in a BMW X5?