What is the correct procedure for Quick Settlement and Easy Compensation?

1 Answers
VanHayden
07/29/25 5:03pm
The parties involved should independently upload and confirm vehicle and driver's license information, and take photos to upload on-site information. The parties involved should negotiate and determine liability on their own. In case of disputes over accident liability, they can apply for remote guidance from traffic police. If the guidance is not accepted, they can call the police and wait for a traffic police officer to handle the matter over the phone or on-site. For cases where the parties involved negotiate and agree on the liability determination results, an electronic version of the agreement will be generated immediately. The insurance company will proactively call the parties involved within 5 to 10 minutes to guide them through the insurance claim reporting, damage assessment, and other related matters. If a traffic accident occurs and meets the criteria for Quick Settlement and Easy Compensation, the parties involved should immediately report the incident to their respective insurance companies, take photos to preserve relevant evidence (the photos should show the accident location and license plate numbers), and leave the scene within 5 minutes. Then, both parties should go together to the Quick Settlement and Easy Compensation Center for liability determination, damage assessment, and claims processing.
Was this review help?
5
1
Share
More Forum Discussions

What Causes the Brake System Warning Light to Illuminate?

Reasons for the brake system warning light to illuminate: 1. ABS function failure; 2. Severe wear or complete failure of brake pads; 3. Non-compliant brake fluid. Abnormalities in the brake system manifest as poor or ineffective braking, unilateral braking deviation, braking noise, brake drum overheating due to brake drag, or parking brake failure. The automotive brake system refers to a series of specialized devices that apply a certain force to specific parts of the vehicle (primarily the wheels) to enforce a certain degree of braking. The functions of the brake system are: to forcibly decelerate or even stop a moving vehicle as required by the driver; to ensure a stationary vehicle remains stable under various road conditions (including on slopes); and to maintain a stable speed for a vehicle moving downhill.
8
4
Share

How to Apply for a Temporary License Plate for a New Car?

New car temporary license plate application procedures: The applicant needs to present a company introduction letter, vehicle origin certificate, compliance certificate, and other relevant documents to the vehicle management office for processing. During the application, the applicant must specify the start and end locations of the vehicle's travel and the duration of temporary plate usage. After review by the management staff and a successful vehicle inspection, a temporary license plate will be issued, with the validity period and travel locations specified. The temporary license plate is a paper license plate that allows the vehicle to be driven temporarily on public roads. It serves as a temporary driving permit issued by the vehicle management department before the new car is officially registered. The temporary license plate must not be used for more than 15 days, and the owner should promptly apply for a permanent license plate from the vehicle management authority.
14
5
Share

Can You Still Drive with a Broken Car Clutch Plate?

You cannot drive with a broken car clutch plate. In most cases, the clutch plate is either worn thin or burnt out. Symptoms include the engine revving up when you accelerate sharply but the car not responding, or in severe cases, the car failing to move after engaging a gear and releasing the clutch. Continuing to drive with a damaged clutch plate is highly dangerous, so it is recommended to have it inspected at a nearby repair shop. The clutch plate is a wear-prone component in a vehicle's drivetrain. Special attention should be paid to avoid keeping your foot on the clutch pedal while the engine is running. Develop good driving habits from the start—only press the clutch when starting, shifting gears, or braking at low speeds. Avoid unnecessary clutch usage and keeping your foot on the pedal at other times.
2
5
Share

Which company manufactures the transmission for the Audi S4?

Audi S4's transmission is produced by ZF Friedrichshafen AG. Below are the relevant details: Audi S4 Transmission: The Audi S4's transmission is manufactured by ZF Friedrichshafen AG and utilizes an 8-speed automatic manual transmission. Audi S4 Overview: The Audi S4 is equipped with a 3.0-liter V6 turbocharged engine, delivering a maximum power of 260 kW, 354 horsepower, and a peak torque of 500 Nm. It features direct fuel injection, permanent all-wheel drive, and can accelerate from 0 to 100 km/h in just 4.7 seconds. In terms of suspension, the front suspension is a multi-link independent setup, and the rear suspension also employs a multi-link independent design. The Audi S4 has body dimensions of 4749mm in length, 1842mm in width, and 1400mm in height, with a wheelbase of 2831mm.
11
3
Share

How to Repair Surface Cracks on a Car's Rear Bumper?

Methods for repairing surface cracks on a car's rear bumper: 1. Remove the bumper and identify the area that needs repair; 2. Use a plastic welding gun to heat and weld the backside of the crack; 3. Move along the crack while heating the plastic welding rod; 4. Once welded, allow it to cool to complete the repair. The front and rear ends of a car are equipped with bumpers, which not only serve a decorative function but, more importantly, act as safety devices to absorb and mitigate external impacts, protecting the vehicle body and ensuring the safety of passengers. The outer panel and cushioning material of the rear bumper are made of plastic, while the crossbeam is formed by stamping cold-rolled thin steel sheets, approximately 1.5 mm thick, into a U-shaped channel. The outer panel and cushioning material are attached to the crossbeam, which is then connected to the car frame's longitudinal beams with screws, allowing for easy removal when necessary.
20
3
Share

Where is the NIO car factory located?

NIO's production base is located in Hefei. Below are some maintenance methods for car batteries: Actively turn off the lights: Remember to turn off the lights and audio system before turning off the engine. During driving, the lights are used most frequently. Additionally, some drivers enjoy playing music while driving, which increases the battery's power consumption to some extent. Therefore, drivers must ensure to turn off the lights and audio before parking and turning off the engine. Keeping them on for a long time will significantly increase the battery's load, which is very detrimental to its lifespan. Avoid long-term parking: Do not leave the car parked for extended periods. In daily life, avoid leaving the car unused for long durations, turning it into a "zombie car," as the battery's charge will gradually deplete over time. When you eventually need to use the car, it may be difficult to start. Therefore, even if you use the car infrequently, make sure to drive it out periodically to keep the battery charged and in optimal condition.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.