What is the correct procedure for one-touch engine shutdown in a car?

2 Answers
LaAngela
08/26/25 3:20am
The correct steps for one-touch engine shutdown are as follows: 1. First, press the brake pedal to bring the vehicle to a smooth stop. 2. Second, shift the gear from D (Drive) to N (Neutral). 3. Third, engage the parking brake (for electronic parking brakes, simply pull up the switch). 4. Fourth, release the foot brake, but do not turn off the power (this ensures the vehicle is completely stationary under the parking brake's effect, preventing P-lock jamming). 5. Fifth, continue pressing the foot brake and shift the gear from N to P (Park). 6. Sixth, release the foot brake and press the one-touch start/stop button to turn off the power, completing the shutdown process. Note: In case of an emergency while driving, you can turn off the engine by pressing and holding the one-touch start/stop button for more than 3 seconds or pressing it three times consecutively. The power will then switch to ACC (Accessory) mode.
Was this review help?
6
4
Share
ValerieRose
09/08/25 3:49am
As a long-time safe driving enthusiast, I believe that turning off a car is not something to be taken lightly. For vehicles with a push-button start, the shutdown process is straightforward but must be done in order: First, press the brake pedal firmly to ensure the car comes to a complete stop. Then, shift the gear lever to the 'P' (Park) position to lock the transmission and prevent rolling. Next, engage the parking brake—whether it's electronic or mechanical—to provide an extra layer of security. After releasing the brake, gently press the start button to turn off the engine. Once the process is complete, confirm that all dashboard lights are off and the doors can be safely locked. These steps might seem tedious, but they significantly reduce the risk of rolling on slopes or damaging an automatic transmission. Just imagine—if you turn off the engine without shifting to 'P,' the transmission could get stuck, and repairs could cost thousands! Making this a habit also extends your vehicle's lifespan, ensuring safety and saving money. Always try to park on level ground when possible, and if you must park on a slope, take extra precautions. Remembering these details will give you much greater peace of mind while driving.
Was this review help?
15
1
Share
Expand All
More Forum Discussions

What to Do When the Paint Turns Yellow?

Keep the vehicle clean to prevent excessive dirt accumulation. Consider purchasing a sunshade car cover to protect the car from prolonged exposure to sunlight and other damages when not in use for extended periods. Regular waxing can effectively prevent the oxidation of the car paint. Essentially, the process involves polishing to remove the oxidized and yellowed parts of the paint that cannot be washed away.
5
2
Share

How to Set Up Window Closing When Locking MG Cars?

Enable the hidden SEC function, then check the options for automatic window closing when locking and automatic anti-theft function. When using the remote to lock the car, any unclosed windows will automatically roll up immediately, but the sunroof will not close automatically. The car will automatically lock after parking and leaving. Note that it takes 10 seconds after leaving before the car locks, not immediately. Automatic locking does not include automatic window closing. The car will only auto-lock when you start the vehicle, park, and then leave. Opening the door after parking and then leaving will not trigger auto-locking.
20
0
Share

How to activate the emergency gear release switch on Roewe RX5?

Unlock the P-gear switch located at the head of the vehicle's gear lever, which is a large button. Pull the driver's door handle to open the door and locate the vehicle's center console. In front of the console is the gear lever, and above it is the P-gear release button. Press this button to unlock Roewe's emergency switch. Ensure the vehicle is stationary and depress the brake pedal when operating.
2
2
Share

How to Set the Passat Dashboard to Chinese?

First, press the one-touch start button. Then click the + button on the volume key three times. Press the SET button on the left side of the multifunction steering wheel to enter the dashboard settings function, and select the menu bar on the multifunction steering wheel. Scroll up and down to find 'language,' then check Chinese in the displayed Chinese-English switch interface on the dashboard. Finally, press the OK button on the right side of the multifunction steering wheel to complete the Chinese-English switch.
7
4
Share

What to Do When All Windows of a 2004 Passat Malfunction?

Should remove the inner cover and apply lubricant. If the glass cannot move at all, it may be a switch malfunction. If it's a switch issue, replacement is the only solution. If the electronic device is not functioning, checking the fuse is common practice. If the fuse is damaged, it is recommended to replace it. Dirt on the glass can also cause resistance, so it's important to keep the windows clean regularly.
17
2
Share

How to adjust the time on Pajero?

In the lower right corner of the small LCD screen above the center console, there is an ADJ button. Repeatedly press this button to find the TIME adjustment column for time setting. There is usually an adjustment lever near the instrument clock - turn left to adjust hours and right to adjust minutes. Press and hold CLK for about 5 seconds until the time display flashes. Use the adjustment knob (turn left to decrease, right to increase) and press CLK again to confirm. Power on the vehicle. There are buttons at the lower left and lower right corners of the instrument panel. Simply use these two buttons to quickly adjust the time.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.