···
Log in / Register

What is the correct parking procedure for the automatic transmission Lavida?

4 Answers
VonBenjamin
09/03/25 8:29am
The correct parking procedure for the automatic transmission Lavida: Brake to bring the vehicle to a complete stop, keep the brake pedal depressed, shift the gear lever to N, engage the parking brake, release the foot brake, turn the ignition key counterclockwise to shut off the engine, press the lock button at the thumb position of the gear lever, push the gear lever to P, rotate the ignition key counterclockwise, and remove the key. The Lavida's body dimensions are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. The Volkswagen Lavida comes with two powertrain options: one is a 1.5L naturally aspirated engine paired with either a 6AT or 5MT transmission, and the other is a 1.4T turbocharged engine mated to a 7-speed dual-clutch transmission.
Was this review help?
15
5
Share
OCharlotte
09/16/25 3:01am
As a novice driver, I pay close attention to parking details when handling the new Lavida automatic transmission. The correct procedure is: first decelerate to bring the car to a complete stop, then keep the brake pedal firmly pressed - this is fundamental safety. Next, shift the gear lever to the P (Park) position, engage the electronic parking brake or traditional handbrake after shifting to ensure the car won't roll back. Finally, turn off the engine and lock all doors and windows. When parking on slopes, I make sure to pull the handbrake extra tight before shifting to P to avoid putting excessive pressure on the transmission. Regular practice of this routine protects the vehicle and prevents gear jamming issues during startup. After several repetitions, it becomes second nature and even helps save fuel. I also routinely check if the handbrake warning light is illuminated as an extra precaution.
Was this review help?
13
5
Share
Expand All
LaCameron
10/30/25 3:36am
From the perspective of driving safety, I believe parking should never be taken lightly. For the New Lavida automatic transmission, after coming to a complete stop, it's essential to first shift into P (Park) gear to lock the transmission, then firmly engage the handbrake to prevent rolling. Before turning off the engine, always confirm the gear is in P position – this dual safety measure ensures protection even if the handbrake is forgotten. In city traffic, I make it a habit to release the foot brake before shutting off the engine to check for any vehicle movement. If there's slight motion, immediate correction is needed. These small steps may seem simple, but neglecting them could lead to transmission damage or rolling accidents. I recommend regular inspection of the handbrake system to ensure proper functionality. Developing these good habits can also extend your vehicle's lifespan.
Was this review help?
3
3
Share
Expand All
MargaretAnn
12/13/25 3:44am
In daily driving of the New Lavida, my parking method is: after stopping the car, directly shift to P gear, pull the handbrake, and turn off the engine. This is suitable for most occasions, worry-free and efficient. Occasionally on slopes, I first shift to N gear, then pull the handbrake before shifting to P, which reduces transmission pressure. The key is not to rush, hold the brake until everything is done. To put it simply, parking an automatic transmission is much easier than a manual one, and the Lavida responds quickly with smooth operation.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

Will the car slow down if the accelerator is not pressed?

Will the car slow down if the accelerator is not pressed? Because the power of the vehicle comes from the engine, the power and torque of the engine, in addition to the inherent parameters of the engine itself, mainly depend on the engine speed. When the driver operates the accelerator pedal, it ultimately results in a change in engine speed. If the accelerator is released, the engine theoretically supplies fuel at the idle speed level, causing the engine speed to drop to idle speed, and the power and torque output by the car will become very small. Due to factors such as ground resistance, the vehicle's speed will gradually decrease. When using the accelerator in daily driving, it is essential to press the accelerator slowly and release it quickly. After releasing the accelerator, the foot must be placed on the brake pedal to be ready to stop at any time. Do not keep the foot on the accelerator, as it can easily lead to mistaking the accelerator for the brake in an emergency, causing a serious accident.
10
5
Share

What to Do If a Car Is Left Unused for a Year?

If a car is left unused for a year, the following steps should be taken: 1. Ensure the car body is clean and dry before parking. Carefully inspect areas prone to water accumulation at the bottom of the car, and remove any standing water promptly. After parking, cover the car with a car cover to protect it from direct sunlight and erosion by rain and snow. 2. Perform maintenance, including changing the oil and three filters, before parking. Disconnect the positive and negative terminals of the battery. It is recommended to start the car and charge the battery every three months to prevent battery drain. 3. If parking outdoors, choose a relatively higher spot, as lower areas are more humid and can lead to faster rusting of the car body. 4. Park the car on a flat surface to keep the suspension system in its normal position and ensure even stress distribution across all suspension components. 5. If the car is parked for more than a year, change the oil before using it again.
8
3
Share

Is Maxxis a part of CST Tires?

Maxxis is a premium tire brand under CST Tires, originating from Taiwan. It is one of the brands used by Cheng Shin Rubber in the automotive tire sector. Maxxis is produced by Cheng Shin Rubber (China) Co., Ltd., a foreign-invested enterprise jointly operated by Taiwan's Cheng Shin Rubber Industry Co., Ltd. and Japan's Toyo Tire & Rubber Co., Ltd. Additional information: Maxxis products are marketed in over 170 countries and regions worldwide. The renowned brand valuation agency BrandFinance released the "2017 Top 10 Most Valuable Tire Brands Globally" ranking, where Maxxis secured a spot in the global top ten. Maxxis has invested billions in establishing R&D centers and professional tire testing grounds, incorporating advanced global R&D technologies and testing equipment. It also collaborates with automakers such as Shanghai GM, Shanghai Volkswagen, SAIC Motor, Changan Ford, and Dongfeng Nissan to provide original equipment tires.
15
4
Share

Is the BMW 5 Series an All-Aluminum Body?

The BMW 5 Series is not an all-aluminum body. The BMW 5 Series uses a standard steel-aluminum hybrid body. The front engine hood, four doors, trunk lid, roof, and fenders of this car are all made of aluminum alloy. The extensions of the A-pillars and B-pillars are made of high-strength steel, while the front and rear bumpers and the side skirts of the body exterior are plastic components. Taking the 2021 BMW 525Li as an example, it is a mid-to-large-sized 4-door 5-seater sedan with a body size of 5106mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3105mm. This car is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 135 kW and a maximum torque of 290 Nm.
11
0
Share

How to Charge a Car Battery Without Removing It?

To charge a car battery without removing it, you can use another vehicle to jump-start the dead battery. The method is as follows: 1. Prepare two jumper cables. The rescue vehicle and the vehicle being rescued should be parked head-to-head, with the rescue vehicle's engine running; 2. Locate the batteries of both vehicles and identify the positive and negative terminals, ensuring not to mix them up; 3. Connect one end of the red positive jumper cable to the positive terminal of the rescue vehicle's battery, then connect the other end to the positive terminal of the dead battery; 4. Connect one end of the black negative jumper cable to the negative terminal of the rescue vehicle's battery, then connect the other end to the negative terminal of the dead battery; 5. When connecting the cables, attach one cable at a time rather than connecting one vehicle completely before the other. Be careful not to let the positive and negative terminals touch each other, as this could cause a short circuit; 6. Once the jumper cables are properly connected, start the rescued vehicle normally.
20
4
Share

What is the charging method of the BYD Tang?

The BYD Tang features a dual-mode charging system. It can be charged externally by plugging into a charging station, or it can utilize its own 2.0T gasoline engine for range-extending charging while driving. The BYD Tang is equipped with an 18.4kWh lithium iron phosphate battery pack. Taking the 2021 BYD Tang as an example, it is a mid-size SUV with body dimensions of 4870mm in length, 1940mm in width, and 1720mm in height, a wheelbase of 2820mm, a fuel tank capacity of 68 liters, and a curb weight of 1895kg. This vehicle is powered by a 2.0-liter turbocharged engine, delivering a maximum torque of 350Nm and a maximum power of 169kW, paired with a 6-speed automatic transmission.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.