What is the correct operation method for stopping at traffic lights during Subject 3 driving test?
3 Answers
When encountering a red light while driving, the driver first needs to slowly press the brake pedal, then fully depress the clutch pedal, and then slowly press the brake pedal again. After fully depressing the brake, release it slightly to allow the vehicle to move forward a bit, then depress it fully again, and finally shift into first gear. When the red light turns green, the driver first needs to lift the clutch pedal to achieve semi-engagement state, then release the brake pedal, and gradually release the clutch. Gradually press the accelerator, then release it again, depress the clutch, shift to second gear, release the clutch, place foot on the brake, check the rearview mirror to ensure no pedestrians are on the road, and finally accelerate.
When it comes to stopping at traffic lights during the driving test (Subject 3), I just passed this part, and the operation requires some finesse: when you see a red light or anticipate it turning red, ease off the throttle and gradually apply the brake to slow down. Avoid sudden braking, as the examiner will deduct points. The ideal stopping position is about 1 meter from the stop line—neither letting the wheels cross the line nor leaving too much gap. Once stopped, immediately press the clutch, shift to neutral, and engage the handbrake to prevent rolling. At this point, take the time to observe your surroundings: turn your head to check left and right, and scan the mirrors to ensure no vehicles or pedestrians are running the red light. When the light turns green, don’t rush to move. First, check blind spots, then press the clutch and release it slowly for a smooth start. Throughout the process, maintain a steady and vibration-free vehicle control, keep a calm mindset, and practice simulations repeatedly to get familiar with it.
Having driven for decades, stopping at traffic lights is a daily routine for me: the key lies in anticipating and decelerating naturally to a stop, avoiding abrupt braking. Leave a small gap before the stop line to ensure you neither cross it nor obstruct traffic; after stopping, fully depress the clutch, shift to neutral, and engage the handbrake—these are fundamental steps. Always observe the intersection, especially pedestrian signals. When the light turns green, start slowly to avoid rear-end collisions caused by sudden acceleration. Examiners focus on smooth and safe driving during tests, and developing these habits in real life can reduce accidents. For beginners, it’s advisable to practice more with driving school simulators to build confidence, transitioning gradually from slow to normal speeds for smoother driving.