···
Log in / Register

What is the correct mixing ratio for automotive water-based paint?

1Answers
DelRiver
07/29/2025, 05:36:14 AM

Automotive water-based paint should be mixed at a ratio of water-based paint:water-based hardener=1:1. Below is detailed information about automotive water-based paint: 1. Overview: Water-based paint, also known as water-based anti-rust paint, water-based steel structure paint, water-based floor paint, or water-based wood paint. It is harmless to humans and does not pollute the environment. It features a full, crystal-clear film with good flexibility, as well as water resistance, wear resistance, aging resistance, yellowing resistance, fast drying, and ease of use. 2. Advantages: Uses water as a solvent, saving significant resources. Water-based paint can be applied directly to wet surfaces and in humid environments; it has excellent surface adaptability and strong coating adhesion. Tools can be cleaned with water, significantly reducing solvent consumption for cleaning.

Was this review help?
120
Share
More Q&A

How to Repair a Cracked Car Bumper?

When a car bumper is cracked, it can be repaired using a plastic welding gun. Here are the details on how to repair a cracked car bumper: 1. Check the material of the front bumper. If it is made of plastic, it can be repaired by gluing and repainting to restore its original condition. This method is particularly beneficial for larger "holes" caused by collisions, as plastic bumpers are easier to repair. 2. If the bumper is made of carbon fiber, it can also be repaired, but the equipment required for this material is specialized and differs from a plastic welding gun. The repair process is more challenging, and the results are usually average. Typically, rear bumpers made of this material are replaced with new ones. However, for smaller "holes," replacing the entire part might be wasteful, so some owners opt for a simple repair using special glue and repainting as a temporary solution. 3. Assess the size of the "hole" caused by the collision. If it is too large or the cost of repairing it to its original state is close to the price of an original replacement part (such as a rear bumper), then the repair method mentioned above may not be worthwhile. In such cases, purchasing an original replacement part (such as a front bumper) is the more practical solution.
101
Share

What to Do When Your Car Key Gets Soaked in Water

If your car key gets wet, avoid pressing any buttons immediately as this can accelerate water penetration into the inner components. Here are detailed steps to handle the situation: 1. Wipe the surface dry. If you're comfortable disassembling it, open the casing, remove the battery, and use highly absorbent paper towels to clean the internal parts. 2. Use a hair dryer on the cool setting to dry it out—never use hot air as the circuit board inside can't withstand high temperatures. 3. Place the key in a thin, breathable bag and then put it in a dry rice container (rice is naturally dry and absorbs moisture well). 4. Gently clean the internal button contacts and other components with high-concentration alcohol, let it air dry, reinsert the battery, and it should be ready for use again.
112
Share

Do You Need to Turn on AC When Using Car Air Conditioning in Winter?

You don't need to turn on the AC button when using car air conditioning in winter. The reasons are as follows: 1. The car's heating system recycles waste heat and doesn't consume extra fuel. The warm air comes from the heat generated by the engine during operation: after the engine's cooling system dissipates heat from the engine, a fan directs this heat into the car's interior to provide warmth. When the heating is not in use, the fan stops, the heating vents close, and all the dissipated heat is released into the atmosphere. 2. The AC button controls the air conditioning compressor. In summer when using air conditioning, you must turn on the AC button to activate the cooling system. However, the heating system simply utilizes the car's internal heat circulation and doesn't require the air conditioning compressor to be engaged. Therefore, to use the heating system, you only need to adjust the air conditioning controls without activating the AC switch.
104
Share

What does the CMA architecture mean?

CMA architecture is a new framework jointly developed by Volvo Cars and Geely Auto, with Volvo Cars taking the lead. The new era high-end joint venture brand Lynk & Co is built based on this architecture. The following are extended details about the CMA architecture: 1. Platform-based production shortens the product development cycle. With numerous automotive components, developing a vehicle model involves extensive technology integration, component design, testing, and validation. 2. Leading safety with enhanced protection. The CMA "Intelligent Magic Cube" safety advantage lies in the close integration of active and passive safety technologies, providing stronger safety protection for vehicle occupants. 3. Lynk & Co vehicles are equipped with 17 intelligent driving control functions. By optimizing various data, collision risks are minimized. Whether driving straight, changing lanes, or parking, Lynk & Co vehicles fully utilize active safety technologies to perceive external traffic conditions for safe driving.
116
Share

Which car is the teana?

teana is the Nissan Teana. The Teana combines Driving Technology (Precision Driving Engineering) and Comfort Technology (Absolute Comfort Engineering) with cutting-edge technology, bringing the design concept of mid-size sedans to a new level, making it a highly competitive model in Nissan's mid-to-high-end car market. More details about the Teana are as follows: 1. The Teana adopts Nissan's new family-style exterior design, with a front face similar to the new Sylphy, and incorporates Infiniti's dynamic design elements into the body lines, highlighting a more fashionable and sporty appearance. 2. Whether at medium or high speeds, the Teana's acceleration response is immediate and smooth, providing ample yet refined power. 3. Standard features of the Teana include pneumatic massage seats, dual-zone independent air conditioning, rearview camera system, active headrests, six airbags, and xenon headlights.
117
Share

What is the reason for the limited chassis function of the BMW 7 Series without affecting driving?

The reasons for the limited chassis function of the BMW 7 Series without affecting driving are as follows: Height sensor damage or failure: Air shock absorber damage or air leakage; air compressor damage. VDP control program failure: Accumulator damage or air leakage; air distribution valve damage or sticking; circuit failure between air suspension components; air pipeline leakage. Fault phenomenon: The right rear air suspension occasionally sinks when driving on bumpy roads, and the CID prompts that driving can continue. The chassis function is limited. When normal, the vehicle is parked for a day, the rear suspension does not sink, the left and right heights are normal, and the air suspension does not leak. It is difficult to reproduce the fault, and the fault can only be reproduced through road testing.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.