What is the correct method to shut down an automatic transmission car with one-button start?

1 Answers
DelAlivia
07/29/25 12:40am
The correct method to shut down an automatic transmission car with one-button start is: 1. Keep your right foot on the brake pedal and shift the gear to N (Neutral); 2. Then engage the handbrake, turn off the engine, shift the gear to P (Park), lift your right foot, and the one-button start parking process is complete. An automatic transmission eliminates the need for the driver to manually shift gears, as the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Typically, automatic transmission cars have six gear positions, arranged from top to bottom as P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low). Driving an automatic car mainly involves using P (Park) for parking, R (Reverse) for reversing, N (Neutral) for neutral, and D (Drive) for forward movement, which fully meets the needs of general driving.
Was this review help?
8
0
Share
More Forum Discussions

How to Set the Time on a Chery Fengyun 2?

The method to set the time on a Chery Fengyun 2 is as follows: 1. Insert the car key into the 'on' position or start the vehicle. There is a small knob on the dashboard; rotate it to the right and hold until you see the time on the dashboard flashing. 2. Release the knob, then rotate it to the right step by step to adjust the hours and minutes. Taking the 2016 Chery Fengyun 2 as an example, its body dimensions are: length 4188mm, width 1686mm, height 1480mm, with a wheelbase of 2527mm. The 2016 Chery Fengyun 2 features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 109ps, maximum power of 80kw, and maximum torque of 140nm, paired with a 5-speed manual transmission.
11
4
Share

What does the Magotan window convenience control mean?

Magotan window convenience control refers to a system where the car window glass can be controlled to rise or lower into position with a single button press. The functions of the windows are: 1. To shield from wind and rain, and reduce noise; 2. To lower wind resistance and guide airflow; 3. To protect the safety of passengers; 4. To reduce the temperature inside the car. Taking the 2020 Magotan as an example, it is a mid-size car with body dimensions of: length 4865mm, width 1832mm, height 1471mm, and a wheelbase of 2871mm. The 2020 Magotan features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum torque of 250Nm, and a maximum power of 110kW, paired with a 7-speed dual-clutch transmission.
11
0
Share

How to Replace the Mazda Cabin Air Filter?

Mazda cabin air filter replacement method is: 1. Open the glove compartment on the passenger side; 2. Push the clips on both sides of the support rod inward to release, then remove the hooks on both sides; 3. Take out the old cabin air filter and install the new one. Mazda's vehicle models include: Mazda CX-3, Mazda CX-5, Mazda CX-8, Mazda 2, Mazda Axela (Mazda 3), etc. Taking the 2020 Mazda Axela as an example, it belongs to the compact car category with body dimensions: length 4662mm, width 1797mm, height 1445mm, wheelbase 2726mm, and fuel tank capacity 50 liters.
8
5
Share

Can a Bulging Tire Be Repaired?

Can a bulging tire be repaired? The repair method is: applying a large patch with a cord layer on the inner side of the tire. Tire maintenance methods include: 1. Regularly checking tire pressure; 2. Removing debris from tire treads; 3. Inspecting tire wear and replacing them in time based on wear conditions; 4. Performing wheel rotation, which ensures even force distribution across all four tires, preventing excessive wear. The functions of tires are: 1. Transmitting driving force, braking force, and steering force to operate the vehicle; 2. Supporting vehicle load; 3. Reducing and absorbing vibrations and impacts during driving to avoid severe vibrations damaging vehicle components.
11
3
Share

What is the reason for slight shaking when the Lynk & Co 01 is idling?

The slight shaking when the Lynk & Co 01 is idling is a normal phenomenon. If the shaking is more severe, it is necessary to check the engine, spark plugs, ignition coils, or clean the throttle and fuel injectors one by one. Taking the 2020 Lynk & Co 01 as an example, it belongs to the compact SUV category, with body dimensions of: length 4512mm, width 1857mm, height 1689mm, wheelbase of 2734mm, and a curb weight of 1736kg. The 2020 Lynk & Co 01 has a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine, with a maximum horsepower of 143ps, maximum power of 105kw, maximum torque of 215nm, and is paired with a 7-speed dual-clutch transmission.
6
4
Share

What are the differences between the Leiling Hybrid and Leiling Hybrid e?

The differences between the Leiling Hybrid and Leiling Hybrid e are: 1. Different engines: The Leiling Hybrid is equipped with a 1.2T L4 engine; the Leiling Hybrid e has a 1.8L L4 engine. 2. Different intake forms: The Leiling Hybrid uses turbocharging; the Leiling Hybrid e uses natural aspiration. 3. Different maximum horsepower: The Leiling Hybrid has a maximum horsepower of 116ps; the Leiling Hybrid e has a maximum horsepower of 99ps. 4. Different maximum torque: The Leiling Hybrid has a maximum torque of 185Nm; the Leiling Hybrid e has a maximum torque of 142Nm. 5. Different fuel tank capacities: The Leiling Hybrid has a fuel tank capacity of 50L; the Leiling Hybrid e has a fuel tank capacity of 40L.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.