What is the Correct Method to Engage the Electronic Parking Brake?

1 Answers
EvanRose
07/30/25 10:53am
When we need to park the vehicle, simply press the brake pedal to bring the car to a complete stop, shift the gear into P position, and then press the electronic parking brake button. Below is an introduction to the electronic parking brake: 1. Introduction: The electronic parking brake, also known as the electronic parking brake system, integrates the temporary braking function during driving with the long-term parking brake function, and achieves parking braking through electronic control technology. 2. Models: Common models equipped with electronic parking brake functions include popular ones such as Volkswagen's Magotan, Tiguan, Passat, Audi A4, A6, BYD's Surui, as well as the New Regal, Citroen Grand C4 Picasso, Volvo S60, and so on. 3. Disadvantages: Modern vehicles are increasingly utilizing electronic control over mechanical systems. From basic electronic power steering to complex active steering ratio control, areas that were traditionally dominated by hydraulic and mechanical controls are gradually shifting towards electronic control. The parts that drivers can directly control through mechanical connections are becoming fewer and fewer. Even the handbrake, beloved by driving enthusiasts, is gradually falling under the 'grip' of electronic control.
Was this review help?
6
2
Share
More Forum Discussions

What is the Best Engine Oil for Honda Civic?

Honda Civic is suitable for 0W20 engine oil, which is designed to improve fuel economy. Engine oil has a significant impact on the performance and lifespan of the engine. If the vehicle is driven with insufficient or poor-quality oil, the engine may malfunction or be damaged. Here is a detailed explanation: 1. The difference between 0W20 and 5W30 oil lies in their low-temperature fluidity and high-temperature protection performance. Due to the engine structure of the Civic model, 0W20 oil with low viscosity and good low-temperature fluidity is more suitable, as it allows the engine to perform at its best. 2. For naturally aspirated engines, the oil quality requirements are generally lower, and mineral oil or semi-synthetic oil can be used. If the owner has a higher budget, full synthetic oil can be considered. Turbocharged engines, compared to naturally aspirated ones, have more precise internal components and operate in more complex conditions, requiring higher-performance oil with better fluidity. Full synthetic oil is highly recommended for turbocharged engines. 3. For the selection of lubricant brands, if longevity is a priority, Mobil lubricants can be used; if cleaning performance is emphasized, Shell oil is recommended; for oil with strong film toughness, Castrol is a good choice. For example, turbocharged engines are prone to carbon deposits during high-speed operation, so Shell full synthetic oil with strong cleaning performance can be selected.
20
1
Share

Should the Lifan KPV150 use 92 or 95 octane gasoline?

Lifan KPV150 uses 92 octane gasoline. The differences between 92 and 95 octane gasoline are as follows: Content differences: There is no quality gap between 92 and 95 octane gasoline, only differences in composition. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. The higher the isooctane ratio, the better the anti-knock performance. However, each car engine has different performance parameters, resulting in different anti-knock requirements. The appropriate gasoline type should be selected based on the anti-knock data provided by the manufacturer. Price differences: The higher the isooctane content, the more expensive the price, so 95 octane gasoline is slightly more expensive than 92 octane. Power differences: Engines with high compression ratios should choose gasoline with high octane values. This is because high engine speeds cause earlier ignition in the cylinder. When the speed reaches a peak, the gasoline in the cylinder may combust prematurely before ignition occurs, which is called knocking. Gasoline with higher octane content can more effectively enhance anti-knock performance.
11
0
Share

What are the functions of each button in the 2005 Teana?

The functions of each button in the 2005 Teana are as follows: I. Central Control Buttons: 1. Electronic Stability Program (ESP): Enabled by default. It is not recommended to turn it off except on slippery surfaces such as rain or snow. 2. Hazard Warning Lights (commonly known as emergency flashers): Used in special situations such as vehicle breakdown or temporary parking, mainly to alert other vehicles. 3. Volume Adjustment Buttons: Adjust the multimedia volume and can also be used to skip tracks. 4. Parking Radar/Image: Warns of surrounding obstacles through images and alarm sounds. 5. Auto Start-Stop: The engine will shut off during brief stops. Releasing the brake pedal will allow the vehicle to continue moving. 6. Recirculation/Fresh Air: Recirculation heats or cools the air inside the car and recirculates it, while fresh air allows outside air to enter the vehicle. 7. Temperature Zone Synchronization: When enabled, changing the temperature in the driver's zone will synchronize the changes in other temperature zones. II. Door Buttons: 1. Rear Window Lock Button; 2. One-Touch Window Control Switch; 3. Side Mirror Adjustment Switch (angle adjustment, folding function); 4. Central Lock Button. III. Roof Buttons: 1. Sunroof Switch; 2. Lights with Door Switch; 3. Driver Reading Light; 4. Passenger Reading Light; 5. Interior Light Switch.
10
2
Share

What transmission does the Volkswagen Talagon use?

Volkswagen Talagon is equipped with a DQ501 seven-speed wet dual-clutch transmission. Configuration: The Volkswagen Talagon comes with multiple advanced features such as adaptive cruise control, collision warning, lane keeping, blind spot assist, panoramic imaging, keyless entry, direct key-activated electric sliding doors, and heated rearview mirrors. Performance: The Volkswagen Talagon is powered by a German-imported EA390 2.5T engine with an aluminum cylinder block, known for its excellent heat dissipation and lightweight characteristics. It delivers a maximum power of 220 kW and a peak torque of 500 N·m, the highest in its class, providing a powerful driving experience.
8
4
Share

Can the Rear Door Top of Baojun 310 Be Replaced?

Baojun 310 rear door top can be replaced. Appearance: The new Baojun 310 adopts the latest family-style design language, with a compact and cute overall appearance. For the front face, the new car features a "U"-shaped air intake grille, with neatly arranged decorative strips inside the grille and a prominent logo in the center. The headlights on both sides adopt a through-type design style, looking very sharp. Body dimensions: The new Baojun 310 is positioned as an A0-class hatchback, with a length, width, and height of 4032 mm, 1680 mm, and 1450 mm respectively, and a wheelbase of 2550 mm, providing ample interior space.
13
5
Share

What is the difference between electronic fuel injection and direct injection in cars?

The difference between electronic fuel injection engines and direct injection engines lies in the way throttle opening is controlled. Direct injection engines control fuel injection based on engine speed, where the throttle opening is manually adjusted via a throttle knob and the power mode switch, resulting in a relatively simple overall structure. On the other hand, electronic fuel injection engines detect various signals such as throttle opening rotation angle, power mode switch, engine speed, fuel pump pressure speed, pilot control valves for each operation valve, excavator working mode, as well as water temperature and oil temperature signals. The engine control unit (ECU) then calculates and controls the fuel injection based on the driver's operational intent.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.