What is the correct method for starting and parking an automatic transmission car?

2 Answers
DiPaul
09/01/25 7:20am
Automatic transmission car starting and parking correct methods are: 1. Insert the key and shift to P gear, press the brake and shift to N gear to start, shift from N gear to D gear, then release the handbrake and foot brake to start; 2. When parking, slow down and press the brake, shift to N gear and turn off the engine, pull the handbrake, release the foot brake and wait for the car to stop completely, then shift to P gear. The gears of an automatic transmission car are: 1. P is the parking gear and starting gear, used for long-term parking; 2. R is the reverse gear, used for reversing; 3. N is the neutral gear, used for short-term parking; 4. D is the drive gear, also called the forward gear, used for smooth forward movement of the vehicle; 5. L is the low gear, used for downhill or uphill driving; 6. S is the sport mode, used for overtaking to obtain stronger power; 7. M is the manual mode, which can be adjusted for manual driving.
Was this review help?
13
5
Share
MariaRose
09/14/25 3:08am
When I was learning to drive an automatic transmission car, I found starting and stopping quite straightforward, mainly involving a few steps: To start, first get in the car and fasten the seatbelt, press the brake pedal to start the engine, then shift the gear lever from P to D. Gradually release the brake, and the car will move slowly on its own, then lightly press the accelerator to speed up. When stopping, slow down in advance, and after coming to a complete stop, keep the brake pedal pressed, shift to P, engage the handbrake (many cars have an electronic parking brake button), and finally turn off the engine. Remember, when parking on a slope, always engage the handbrake before shifting to P to prevent the transmission from locking the wheels and causing them to stick due to sliding. Before starting, it's best to check the rearview mirror for pedestrians; developing this habit can help avoid many risks. At first, I often forgot to press the brake and shifted gears directly, causing a sudden jerk that was quite frightening. Now, after practicing a few more times, it's much smoother. Beginners should find an empty parking lot to practice several times to feel more confident.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

What Causes a Car Air Conditioner to Break Down?

Car air conditioner malfunctions can be attributed to the following reasons: Damaged Air Vent Flap: The flap motor is typically located in the lower middle section of the dashboard and serves as the master switch for air vents. If it fails, the switch is effectively broken. Even if the AC can produce cold air, the airflow will only seep through gaps, akin to quenching thirst with poison. Faulty Expansion Valve or Throttle Valve: The air conditioning compressor rarely fails, so it's not a major concern. However, malfunctions in the expansion valve or throttle valve directly lead to poor AC performance. Diagnosing these issues is complex and requires professional repair services. Loose or Aged Belt: The belt is often an overlooked component. During routine maintenance, 4S shops usually recommend belt replacement. If neglected, slipping may occur during operation, leading to belt breakage, unusual noises, loss of power assistance, and poor AC performance.
5
2
Share

What should be noted when driving near a bus stop with parked buses?

When driving near a bus stop with parked buses, it is necessary to slow down and maintain a safe distance from the bus to prevent sudden starts by the bus or passengers crossing the road in front of or behind the bus. Additionally, pay attention to whether there are pedestrians crossing the road in front of or behind oncoming buses, and be prepared to stop at any time. Here is supplementary information: Proceeding straight through an intersection: Before entering an intersection while driving straight, it is necessary to apply the brakes to slow down, and the speed should not exceed 30 km/h when passing through the intersection. Passing by a school: In areas near schools, the speed should be kept below 30 km/h, and braking should be used as needed.
6
3
Share

What specifications are included in the 19-inch tire size chart?

19-inch tire size chart includes specifications such as 245/55R19, 245/45R19, 225/45R19, 265/50R19, 235/55R19, 215/35R19, etc. Below is relevant information about car tire sizes: Tire width: Tire width is one of the factors affecting the vehicle's fuel consumption performance. The wider the tread, the larger the contact area with the ground, resulting in greater friction and higher fuel consumption. Aspect ratio: Tires with a higher aspect ratio have longer sidewalls, providing better comfort. However, the drawback of a high aspect ratio is weaker lateral resistance during turns. Tire size speed rating: Car tires limit the vehicle's speed, with different tires having varying speed standards. It is crucial to strictly adhere to the tire's speed limits during driving; otherwise, it can significantly reduce the tire's lifespan and increase the risk of a blowout.
8
3
Share

Is Driving License Downgrade Protection Reliable?

Driving license downgrade protection is not reliable because it is illegal to protect the downgrade of a driver's license. If a motor vehicle driver fails to complete the downgrade and license replacement procedures within the specified time, the vehicle management office should announce the invalidation of the driving qualification for the corresponding vehicle type. There is no way to protect a downgraded license; one can only accept the consequences. Below is some additional information: Holders of AB-class driver's licenses who commit traffic violations while driving large trucks and accumulate 12 penalty points within one cycle must go to the traffic management office where the violation occurred within 30 days to complete the downgrade of their driver's license. Additionally, downgrades will occur if the driver is involved in a traffic accident resulting in death and bears equal or greater responsibility without constituting a crime, accumulates a full 12 penalty points within one scoring cycle, or fails to participate in the review for three consecutive scoring cycles.
1
3
Share

What are the world's four major car brands?

The world's four major car brands are General Motors, Ford, Daimler-Chrysler, and Toyota. Below is a related introduction about Toyota: Toyota's main models include Corolla, Camry, ES, Avalon, RAV4, and Highlander. Toyota's industries: Toyota's product range covers automobiles, steel, machine tools, pesticides, electronics, textile machinery, fiber products, household goods, chemicals, construction machinery, and construction. In 1993, its total sales ranked 5th among the world's industrial companies. It produced 4.45 million vehicles that year, accounting for 9.4% of the global automobile market. Toyota is the world's largest automobile company and plays a pivotal role in the global automotive industry.
14
1
Share

How Many SSCs Are There Worldwide?

SSC seems to have only a few dozen vehicles globally, with the exact number not being very clear. This brand specializes in manufacturing supercars, and as a niche brand, many people may not be very familiar with it—some might not even have heard of it. SSC is the Chinese translation of Shelby-Supercars, abbreviated as SCC. Here is more information: Content 1: SSC's models are very expensive, falling into the multi-million-dollar supercar category, with formidable performance and limited production runs. Content 2: SSC is the Chinese translation of Shelby-Supercars, abbreviated as SCC. The company was founded in 1999 by Jerod Shelby and is headquartered in Washington, making it an American supercar manufacturing company.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.