What is the correct method for starting and parking an automatic transmission car?

How to adjust the equalizer of Geely Emgrand GL?

There are two methods to adjust the Emgrand GL equalizer: 1. Increase both treble and bass to +6, set midrange to zero, and move the overall sound field to -3 or -4 towards the rear seats; 2. Set bass to maximum, adjust midrange to 5/4, and treble according to personal preference (recommended at 3/2). For speaker position adjustment: Set the left-right balance of the auditory center to 0, and front-rear balance to -5 to maximize the volume of the front bass speakers. The Emgrand GL is positioned as a compact car with dimensions of 4725mm in length, 1802mm in width, 1478mm in height, and a wheelbase of 2700mm. This model is equipped with three engine options: a 1.4L inline 4-cylinder turbocharged engine, a 1.5L inline 3-cylinder turbocharged engine, and a 1.8L inline 4-cylinder naturally aspirated engine.

20

4

Share

Chery Tiggo 5 Automatic 2.0 Fuel Consumption?

The fuel consumption of the Tiggo 5 manual transmission model is 10 liters per 100 kilometers, while the automatic transmission model consumes 10.9 liters per 100 kilometers. Below is relevant information about the Tiggo 5: 1. Exterior: The Chery Tiggo 5 has an overall length of 4506mm, significantly larger than the previous generation Tiggo, especially in width, reaching 1841mm, providing very spacious passenger space. The extended flared fender design gives a strong sense of power, combined with the forward-leaning waistline, even when stationary, the vehicle exudes a sense of eagerness to move. 2. Interior Configuration: The traditional upper dark and lower light color scheme creates a warm atmosphere, with reasonable use of chrome strips to decorate the air vents, steering wheel, and other areas, enhancing the sense of quality. The well-layered dashboard is very much in line with current trends, and the stepped button layout also suits the operating habits of most people.

4

1

Share

Where is the tire pressure monitoring reset for the Baojun 510?

The tire pressure monitoring reset button for the Baojun 510 is located below the cigarette lighter. Tire pressure reset is an operation performed on the tire pressure monitoring system to reset it after addressing a tire pressure fault. Tire pressure reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the fault light on the dashboard will turn off. Solutions for insufficient tire pressure: If no visible damage is found, simply inflate the tire to the normal pressure and reset the tire pressure system. If a puncture is found upon inspecting the tire, drive to a tire shop promptly for a repair, then reinflate the tire. If the low tire pressure warning appears again some time after inflation, but there is no puncture, it may be due to air leakage caused by a deformed wheel rim. It is recommended to check the wheel rim and replace it if necessary.

4

2

Share

How to Adjust Car Rearview Mirrors Correctly?

The correct method for adjusting car rearview mirrors is as follows: 1. Left rearview mirror: Remember two indicators: 1/4 and 1/2. Simply put, the edge of the car body should occupy 1/4 of the entire mirror view, with the rest taking up the majority. For height adjustment, observe the distant horizon and position it in the center, with the sky and ground each occupying half. 2. Right rearview mirror: 1/4 and 2/3. Since the driver's seat is on the left side of the vehicle, visibility on the right side is often less clear than on the left. In practice, the ground portion should occupy about 2/3 of the mirror view when adjusting the up and down positions. For left and right positioning, similar to the left mirror, the car body should occupy 1/4 of the mirror view. 3. Central rearview mirror: Half and half. To adjust the central rearview mirror, first adjust your sitting posture. Some people prefer sitting very upright, while others lean back as if on a sofa, resulting in different angles and significant height differences in the mirror. After determining your posture, look up at the central mirror. You should be able to see the rear windshield (rear window) clearly, with the sky and ground each occupying about half of the view.

18

5

Share

Can 92 and 95 gasoline be mixed for use?

95 and 92 gasoline cannot be mixed. 95-octane gasoline is suitable for engines with high compression ratios. If 92-octane gasoline is used in a high-compression engine, it may cause abnormal combustion, knocking, and even engine seizure. Additionally, carbon deposits will accumulate faster than usual, leading to insufficient power, engine wear, or even complete failure. Since gasoline is a mixture and the chemical compositions of both types are relatively similar, it is recommended to use them separately to ensure vehicle safety. The difference between 92 and 95 gasoline lies in their octane ratings and quality levels. The details are as follows: Difference in octane rating: 92-octane gasoline contains 92% isooctane and 8% n-heptane. 95-octane gasoline contains 95% isooctane and 3% n-heptane. Difference in gasoline quality: The octane number of gasoline represents its octane rating. A higher octane number indicates a higher octane rating, which means better anti-knock performance. This allows the engine to run more smoothly, reduces wear and tear, and provides better protection for the engine. It is recommended that vehicles requiring lower-octane gasoline will not be damaged if higher-octane gasoline is accidentally used. However, the increase in octane rating may alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. Using lower-octane gasoline in vehicles designed for higher-octane fuel may cause engine knocking. Because the octane rating is too low, the lowered ignition point may cause premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance will arise during the upward stroke, making the engine run very unstably. Mild knocking may only increase noise without obvious engine damage, but severe knocking indicates serious engine issues, affecting driving stability and causing abnormal wear on pistons and cylinders, or even cylinder scoring in severe cases. If you accidentally mix fuels or use the wrong octane gasoline, simply refill with the correct octane gasoline next time to restore normal operation. Some drivers believe that using higher-octane gasoline can improve performance, but this is unnecessary because if the engine's compression ratio does not meet the standard, even premium fuel will not make a difference. At best, it may slightly reduce carbon emissions and keep the engine cleaner.

12

2

Share

What does ECON on a car air conditioner mean?

The ECON on a car air conditioner is actually an energy-saving mode of the air conditioner, which only takes effect when the air conditioner's cooling function is activated. The air conditioner compressor is driven by the engine and can consume up to 20% of the engine's power. After activating the ECON mode, the vehicle will reduce the power consumption of the air conditioner while ensuring its cooling effect, thereby achieving fuel savings. The method to activate the air conditioner's economy mode is very simple. The owner only needs to press the "ECON" button after turning on the air conditioner. When the light on the button is on, the air conditioner's cooling system is turned off, and only natural air or warm air is provided. The introduction to the car air conditioner's ECON mode is as follows: Usually, the car air conditioner has the "A/C" symbol to indicate whether the air conditioner is on or off, while ECON only takes effect when the air conditioner's cooling function is activated, representing the air conditioner's economy mode. In this state, the compressor will also work. Compared to the normal mode, the control point of the compressor is increased, and the compressor does not continuously engage during operation. The start and stop points of the compressor are controlled by the evaporation temperature. In normal mode, the compressor's start and stop points are 2~4°C. In ECON mode, the compressor's start and stop points are 8~10°C. The lower the temperature, the longer and harder the compressor will work. Activating the ECON mode will save the engine's power output and save fuel. The functions of the car air conditioner: Achieve cooling effects by continuously changing the state of the refrigerant in a cycle; Remove dust, odors, smoke, and toxic gases from the air inside the car, making the air fresher, and humidify the air inside the car to increase its relative humidity; Use the engine coolant, waste heat, or heat generated by a burner as a heat source for heating, and heat it through a heater, then blow the heated air into the car or outside air to raise the temperature at the air outlet for heating purposes; Draw in fresh air from outside for ventilation and air exchange, which also helps prevent window fogging. Precautions for using the air conditioner in the car: Do not set the air conditioner temperature too low. A large temperature difference between the inside and outside of the car can easily cause the driver to catch a cold, and excessively low temperatures may also pose a risk of arthritis to the occupants. Control the direction of the air outlet. Based on the principle that cold air sinks and hot air rises, when controlling the air conditioner's air outlet, you can follow the rule of pointing the air outlet upward when cooling and downward when heating. Do not turn on the air conditioner immediately after the car has been exposed to the sun. After the car has been exposed to the sun, the temperature inside will be very high. First, open the windows for ventilation, and then turn on the air conditioner after the hot air has been expelled.

15

2

Share

What is the correct method for starting and parking an automatic transmission car?

How to adjust the equalizer of Geely Emgrand GL?

Chery Tiggo 5 Automatic 2.0 Fuel Consumption?

Where is the tire pressure monitoring reset for the Baojun 510?

How to Adjust Car Rearview Mirrors Correctly?

Can 92 and 95 gasoline be mixed for use?

What does ECON on a car air conditioner mean?

What are the reasons for insufficient clamping force in the H6 electronic parking brake?

What is the chassis number on the vehicle license?

What is the transmission of the Volkswagen Teramont?

Where is the exhaust brake turned on?