What is the correct method for starting an automatic transmission car?

1 Answers
McEvan
07/24/25 7:49pm
Starting should be done by first pressing the brake, igniting the engine, shifting to D gear, releasing the handbrake, and then pressing the accelerator to start correctly. The correct method for parking is to first press the brake, engage the handbrake, shift to P gear, and then turn off the engine. Below is an introduction to automatic transmissions: 1. Clutch structure: Hydraulic automatic clutch, CVT continuously variable transmission, DSG dual-clutch transmission. The clutch structure of an automatic transmission is completely different from that of a manual transmission. A semi-automatic transmission refers to AMT, which adds an automatic shifter to a manual clutch, i.e., a manual clutch with automatic shifting. 2. Manual-automatic integration: A manual shifting mode simulated on the basis of an automatic transmission.
Was this review help?
19
0
Share
More Forum Discussions

What does 'three no steps' mean in driving?

Driving without stepping on the accelerator, brake, or clutch when making a U-turn. Reasons: When pedestrians or cars suddenly emerge from the roadside or approach from the next lane, stepping on the accelerator directly can easily lead to sudden stops, resulting in accidents; when driving at 15km/h, which is too fast, encountering minor situations and stepping on the brake directly can easily cause the vehicle to stall during a U-turn. Purpose: The reason to avoid the 'three no steps' is due to the limitations of local driving test rules. Additionally, the 'three no steps' can help drivers better control speed, preventing the vehicle from losing control or stalling when stepping on the accelerator or brake during turns.
14
1
Share

How to Claim Compensation from a 4S Store for New Car Quality Issues?

If there are quality issues with a new car, you can request the 4S store to replace or refund the vehicle. According to the automobile three-guarantee policy, if a household automobile product meets the replacement conditions and the seller does not have the same brand and model of household automobile product, nor a household automobile product with a configuration not lower than the original one to replace for the consumer, the consumer may choose to return the product, and the seller shall be responsible for the return. Within 60 days from the date the seller issues the purchase invoice for the household automobile product or within 3,000 kilometers of driving distance (whichever comes first), if the household automobile product experiences steering system failure, brake system failure, body cracking, or fuel leakage, and the consumer chooses to replace the household automobile product or return it, the seller shall be responsible for free replacement or return. During the three-guarantee validity period, if two repairs have been accumulated due to serious safety performance failures, and the serious safety performance failures have not been eliminated or new serious safety performance failures occur; if the engine or transmission has been replaced twice, or the same major component of the engine or transmission has been replaced twice due to quality issues and still cannot be used normally (the replacement counts for the engine, transmission, and their major components are not duplicated); if the same major component of the steering system, brake system, suspension system, front/rear axle, or body has been replaced twice due to quality issues and still cannot be used normally, and the consumer chooses to replace or return the product, the seller shall be responsible for replacement or return.
12
5
Share

What does it mean to drive with a license?

You must carry relevant documents to drive a vehicle on the road. Precautions for novice drivers with a license: As a novice driver, it is inevitable to be unfamiliar with road conditions and emergency situations. This period is also known as the probationary period for new drivers, which refers to the 12 months starting from the day the license is obtained. During this period, it is necessary to attach a probationary sign at the rear of the vehicle. Relevant legal requirements: When driving on highways during the probationary period, the driver must be accompanied by a driver who has held a driving license for the corresponding or higher vehicle category for more than three years. Among them, drivers of small automatic passenger vehicles for the disabled can be accompanied by a driver who holds a driving license for small automatic passenger vehicles or higher. During the probationary period after adding a new vehicle category, the above restrictions do not apply when driving the original vehicle category.
8
1
Share

Does coasting in neutral gear damage a manual transmission car?

Coasting in neutral gear (N) does not damage a manual transmission car and can even save fuel. The N gear is the neutral position, which typically means the vehicle's gear shift lever is not engaged in any forward or reverse gear, completely disconnecting the transmission from the drive wheels. Method for coasting in N gear: After accelerating the car to a certain speed by pressing the accelerator, shift the gear to neutral to coast. Coasting in N gear does not harm the vehicle: In N gear, the wheels and the engine are completely disconnected, reducing various frictions and resistances. This actually results in less wear on the transmission. The engine remains in an idle state with minimal load, so wear is also minimal.
5
1
Share

Should the coolant in the Hongguang S be replaced directly or just topped up when low?

If the coolant in the Hongguang S is low, it can be topped up, but it is important not to mix coolants from different manufacturers. Since different brands of coolant have different formulations, mixing them can cause chemical reactions. Typically, coolant has an effective service life of two years. If it expires or appears dirty, it should be replaced. How to determine if the coolant is low: Check the coolant warning light on the dashboard. If it lights up, it is likely due to low coolant, though it could also be caused by excessively high engine temperature. Inspect the coolant reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving and add coolant promptly. Check the water level markings on the coolant overflow tank. The coolant level should normally be between the maximum and minimum marks. To determine if coolant is low, observe the markings. If the coolant is below the minimum level, it indicates a shortage. Coolant replacement interval: For vehicles that operate for long periods, such as taxis, high-quality coolant should generally be replaced once a year. For vehicles with shorter operating times, replacement can be done every two years or every 30,000 kilometers. To prevent excessive foam formation, which can reduce the heat exchange efficiency between the coolant and engine components, ensure the product is within its validity period when adding it. Long-life coolant can remain effective for up to three years. If suspended particles, sediment, or signs of deterioration or discoloration are observed in the coolant, replace it immediately and clean the system.
19
5
Share

How to Choose Between URV and Guan Dao?

Choosing the Honda Guan Dao is a better option. The reasons for selecting Guan Dao are as follows: 1. The Honda Guan Dao has enjoyed high popularity since its launch, with notable advantages in fuel efficiency and durability. 2. The Honda Guan Dao offers good space, strong power, fuel efficiency, and excellent comfort. Below is extended information on URV and Guan Dao: 1. In terms of exterior design: The Honda Guan Dao features a more stable and grand appearance with a distinct sense of layering in the front face design. The headlights adopt an open-eye design with a sharp shape, and the grille is decorated with thick and three-dimensional chrome strips. The lower air intake adopts a polygonal design. The overall design of the Honda UR-V feels slightly bulky. In terms of body dimensions, the Honda Guan Dao measures 4816 mm in length, 1942 mm in width, 1669 mm in height, with a wheelbase of 2820 mm; the Honda UR-V measures 4825 mm in length, 1942 mm in width, 1670 mm in height, with a wheelbase of 2820 mm. 2. In terms of configuration: Guan Dao offers high cost-effectiveness with features such as a panoramic sunroof, front fog lights, rearview camera, and leather seats. The steering is very flexible and light, the chassis is stable and solid, with good off-road capability. It is fuel-efficient and provides excellent comfort. In terms of power, both cars' base models are equipped with a 1.5T turbocharged engine paired with a CVT continuously variable transmission; the high-end models use a 2.0T turbocharged engine paired with a 9-speed automatic transmission. Both cars share the same configurations in terms of maximum engine power, maximum torque, and maximum horsepower.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.