What is the correct method for starting a Roewe automatic transmission vehicle?

3 Answers
CarmenFitz
07/29/25 7:38am
Turn the ignition key to the second position to power on, allowing the vehicle's computer system to initiate self-check. Depress the foot brake, shift the gear into D (Drive), and release the parking brake. Then smoothly lift the brake pedal, and after the vehicle starts moving slowly, gradually press the accelerator pedal. Start the vehicle.
Was this review help?
3
2
Share
KeiraLynn
08/13/25 1:39am
I remember feeling a bit nervous the first time I drove a Roewe automatic, but I quickly mastered the correct starting procedure. The first step must be to ensure the car is completely stopped in the P position, then firmly press the brake pedal—this step absolutely cannot be skipped. Next, turn the key to start the engine and wait about 10 seconds for the system to complete its self-check; don't rush to move. Then gently shift the gear from P to D while keeping the brake pedal pressed. At this point, after observing that the surroundings are safe, slowly release the brake pedal, and the car will begin to creep forward. Then lightly press the accelerator to start moving—not too quickly, as tire slippage can be dangerous. I especially remind beginners to check that their seatbelt is securely fastened and the rearview mirrors are properly adjusted. Don't underestimate these details; suddenly starting in the city and hitting something would be troublesome. In short, smoothness is key. The Roewe's response is very sensitive, and with a bit of patience, you can drive steadily.
Was this review help?
5
1
Share
Expand All
FelicityLee
10/04/25 8:10am
I drive my Roewe automatic transmission car to work every day and have gotten used to the efficient starting method. Before starting, make sure it's in P gear and press the brake pedal all the way down. After starting the engine, immediately check the dashboard to see if the self-check lights go off, which usually takes about 5 seconds. Shift to D gear while keeping the brake pressed, glance at the rearview mirror to ensure there are no cars or pedestrians, then release the brake. As the car starts to move, lightly tap the accelerator for a smooth start. I've noticed that Roewe's electronic systems respond quickly, but aggressive acceleration can cause jerking. Driving gently not only ensures comfort but also saves fuel. When parking, try to choose a flat surface. For hill starts, use the electronic parking assist. Remember not to get distracted by music or your phone—stay focused on driving to reduce the risk of accidents.
Was this review help?
15
0
Share
Expand All
More Forum Discussions

What is the simplest and most accurate method for A2 reverse parking?

Drive the car forward until it is roughly aligned with the car in front, then adjust the right-side mirror until the right wheel is visible. Keep the steering wheel fully turned to the right and reverse slowly until the left-side mirror shows the front of the car behind; use the right-side mirror to straighten the car body. When the right-side mirror is almost parallel with the taillight of the adjacent car, straighten the steering wheel and continue reversing. Once the car is inside the parking space, press the clutch firmly, check if the rear of the car is properly positioned, then press the clutch and brake, and shift to neutral.
4
0
Share

How to Choose Between A6 and Q5?

Audi A6's front fascia is more impactful, with this generation emphasizing a sportier style, blending elements of sportiness and elegance into its composed appearance. Audi Q5's angular front-end design adopts the Q7's design language, incorporating chrome accents for a more robust and streamlined look. Audi A6's full LCD instrument cluster and large central display screen exude a sense of technological sophistication and luxurious fashion. Audi A6 is equipped with high and low power versions of a 2.0T engine, delivering stable performance on highways and during turns, paired with a 7-speed dual-clutch transmission. Since Audi Q5 replaced its 8AT with a 7-speed dual-clutch transmission, like many vehicles today, it still offers a remarkably smooth driving experience.
15
5
Share

How to Fix the AFS OFF Light?

AFS OFF light indicates that the headlight's adaptive front-lighting system (AFS) is turned off. Re-enable the AFS function. Check the AFS module, use a diagnostic scanner to match settings and clear fault codes to resolve the AFS warning light. AFS stands for Adaptive Front-lighting System. If the indicator light stays on, it means this function is currently disabled. Ensure the vehicle's power is off, then open the hood and locate the negative terminal of the battery.
11
1
Share

What is the procedure for handling a full 12-point deduction on a driver's license?

The procedure for handling a full 12-point deduction on a driver's license is to participate in a 7-day traffic safety laws, regulations, and related knowledge training within 15 days, followed by a relevant examination. Upon passing the exam, the points will be cleared, and the driver's license will be returned. Process for handling vehicle violation point deductions: Bring your ID card, driver's license, and vehicle registration certificate to the violation processing office. Take the penalty decision notice to the designated bank to pay the fine (once the penalty decision notice is printed, the fine must be paid within 15 days. After 15 days, a 3% late fee will be charged daily, with the total late fee not exceeding the total fine amount). After paying the fine and obtaining the receipt, keep the receipt properly. Check the violation information online a few days later. If the violation information disappears, the receipt can be discarded. However, if the violation information remains online, take the payment receipt to the legal department of the traffic police team to explain the situation. After confirmation by the staff, the violation information will be directly deleted.
1
5
Share

What Causes the Rear of the Car to Cross the Line During Parallel Parking?

The reason the rear of the car crosses the line during parallel parking is either starting to park too early or being too far from the line. You can drive forward a little more before stopping to ensure the car body is slightly closer to the parking space line. When parking, try to stay slightly to the right, which makes it easier to reverse into the parking space, while also paying attention to the distance between the front and rear. More details are as follows: 1. Definition of Parallel Parking: Parallel parking is part of the second subject in the driver's license test. It is increasingly common in urban areas, especially as parking spaces in formal lots become more limited. Many places now designate parking spaces along the sides of streets, creating "parallel parking spaces." 2. Changes: In the past, parallel parking used four poles placed on the ground to symbolize the four corners of the parking space. One criterion for successful parking was whether the vehicle entered the space without touching these poles. After the new traffic regulations were implemented, parallel parking no longer uses poles; instead, ground markings define the boundaries of the parking space. For students learning to drive with a C1 license, the length of the parallel parking space is 1.5 times the vehicle's length plus 1 meter. The vehicle must be driven parallel to the parking space, then reversed into the space in one continuous motion without stopping. As long as the car is parked within the boundaries without crossing the lines, it is considered a pass.
7
3
Share

What Causes Low-Speed Jerking?

Transmission jerking is the impact sensation caused by the inertia of moving parts inside the engine. Below are the reasons for engine jerking: 1. Causes of engine jerking: During the process where the engine speed is either increased or decreased, if not handled properly, sudden changes in engine speed during gear shifts can cause the inertia of the engine's moving parts to react against the vehicle body. 2. Low-speed jerking: Many drivers experience this issue. When driving at low speeds, the gear frequently shifts between first and second, and the clutch repeatedly engages and disengages. If power transmission cannot be smoothly completed within a short time, common low-speed jerking occurs. Jerking sensations are normal during startup and low-speed driving, usually due to turbocharger engagement at low RPMs, which affects engine speed. 3. Upshift jerking: This is mostly caused by the transmission's response speed being insufficiently fast. The upshift speed cannot keep up with the throttle input, so the jerking sensation occurs at the moment of gear shift. 4. Downshift jerking: This is mostly due to the intervention of the energy recovery system. Once the driver releases the throttle pedal or presses the brake pedal, the generator immediately starts working, placing additional load on the engine. This affects the engine speed, causing it to be out of sync with the clutch plate speed, resulting in a jerking sensation.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.