···
Log in / Register

What is the correct method for parking and turning off the engine in the Tiguan L?

4 Answers
VonCayden
07/28/25 4:33pm
The correct steps for parking and turning off the engine in the Tiguan L are: 1. Engage the P (Park) gear before stopping; 2. Activate the electronic parking brake; 3. Finally, turn off the engine. Relevant information about the car's gears is as follows: 1. The P gear is the parking gear, used when parking and turning off the engine. The P gear has a locking mechanism that locks the transmission's final drive gear, effectively locking the wheels indirectly. After engaging the P gear, the car cannot move even without pulling the handbrake. 2. Both manual and automatic transmissions have an N (Neutral) gear. After engaging the N gear, pressing the accelerator pedal will not move the car. Unlike the P gear, the N gear does not have a locking mechanism to secure the gears.
Was this review help?
15
5
Share
OKyle
08/11/25 8:46pm
I haven’t been driving for long, so I have to be extra careful when parking and turning off the engine. First, find a flat and safe spot to stop, avoiding slopes or uneven roadside areas, and firmly press the brake. Then shift into P (Park) mode—the Tiguan L has an electronic parking brake function, so just gently pull the button to lock it. Turn off power-consuming accessories like the AC and music before shutting off the engine. Don’t rush the process; make sure all windows are fully closed before locking the car. Once this becomes a habit, both the battery and engine will be easier to maintain. After parking, do a quick check—avoid doing this during frequent auto start-stop cycles to protect the battery from unnecessary strain. Choosing a shaded spot is even better, as high summer temperatures can cause more issues. Sticking to these practices long-term ensures smoother driving, better fuel efficiency, and above all, safety first.
Was this review help?
18
1
Share
Expand All
DelEmma
09/29/25 7:17am
Having driven for over a decade, turning off the engine after parking has become second nature to me. Gradually come to a complete stop, press the brake firmly, engage the P gear, and then use the electronic parking brake to lock it in place to prevent rolling. Turn off all electrical appliances like lights and air conditioning to reduce the battery load before shutting down the engine. Usually, I choose a good parking spot, avoiding narrow alleys or slopes, which makes things simple and hassle-free. The Tiguan L's system is quite efficient—just confirm the dashboard signals are normal before turning off the engine. Proper car maintenance hinges on these details. Don’t overlook them; make these actions a habit in daily driving to extend battery life and reduce failure rates. Before locking the car, always check the windows to prevent accidents. Long-term experience tells me that being steady and thorough brings the most peace of mind.
Was this review help?
5
3
Share
Expand All
BraydenDella
11/13/25 2:24am
I often study automotive electronic systems, and the Tiguan L requires coordination with the auto start-stop function when parking and turning off the engine. After coming to a complete stop, press the brake, shift into P mode to activate the electronic parking brake, ensuring the vehicle is locked. Turn off electrical appliances like the air conditioning and audio system, then deactivate the start-stop function before turning off the engine to reduce battery wear. Choose a flat area for parking to avoid risks on slopes. This method protects the vehicle's software system and prevents battery damage from frequent short-term starts. The daily operation is simple, and adhering to it extends the lifespan of components. Choosing a shaded spot is even better to minimize the impact of high temperatures on electrical parts.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

What is the fuel tank capacity of the Wuling Rongguang?

The 2020 Wuling Rongguang has 3 models, all with a fuel tank capacity of 38 liters. The entire lineup is equipped with a 1.2L-76 horsepower-L4 engine and a 5-speed manual transmission (MT). All models feature a mid-engine, rear-wheel drive layout. In the same vehicle class, the Dongfeng Xiaokang K05S 2019 model 1.2L Utility Type VI-DK12 has a fuel tank capacity of 40 liters, while the Fengjing V3 2017 model 1.0L Basic 7-seater 4W10M1 has a fuel tank capacity of 45 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safety limit. There is additional space from the safety limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E and F. When the needle is near E, it indicates low fuel, while near F means the tank is full.
13
0
Share

What to Do If ETC Fails to Register on the Highway?

If the ETC fails to register on the highway, the solution is to promptly contact the toll booth staff to manually register and pay the fee to avoid affecting future use. Here are specific details about ETC: Meaning of the Name: ETC (Electronic Toll Collection), translated in Chinese as electronic non-stop toll collection, is an automatic toll system for highways or bridges. Function Introduction: Through dedicated short-range communication between the vehicle-mounted electronic tag installed on the windshield and the microwave antenna in the ETC lane at the toll station, it uses computer networking technology to process background settlements with banks, enabling vehicles to pay highway or bridge tolls without stopping. System Components: It mainly consists of an automatic vehicle identification system, a central management system, and other auxiliary facilities.
10
2
Share

Will the validity period of the driver's license change if it is reissued due to loss?

No, the validity period of the driver's license will not change due to reissuance, additional endorsements, or other reasons. Regulations on the validity period of the driver's license: Article 25 of the "Business Regulations for Motor Vehicle Driver's License" stipulates that except for renewal upon expiration, which requires recalculation, the validity period of the driver's license remains the same for other types of renewal procedures. The date remains unchanged after reissuance: According to the application and usage requirements for motor vehicle licenses, if a motor vehicle license is lost and reported, the owner should apply for a replacement at the motor vehicle management department where the original license was issued. After obtaining the new license, the original license becomes invalid and cannot be used further. The date remains unchanged after reissuance.
7
3
Share

What is the size of a sedan tire?

Typically, there are three types: 185/65R14, 185/65R15, and 205/55R16. Tire types: Tire types include: international standard tire codes, expressed in millimeters as the section width and the aspect ratio percentage. This is followed by: tire type code, rim diameter (in inches), load index (permissible load capacity code), and permissible speed code. Tire specifications introduction: For small sedans with engine displacements between 0.8-1.5, the corresponding front tire specifications range from 155/65R1373T to 175/70R1477H. For large sedans with engine displacements between 1.6-6.0, the tire specifications range from 185/60R14 to 245/50R18.
19
4
Share

What Causes the Car Lights Not to Flash When Locking with the Remote Key?

Here are the reasons why the car lights do not flash when locking with the remote key: Anti-theft double flash function is disabled: When using the remote key to lock the car, the lights may not flash because the vehicle's anti-theft double flash function is disabled. This can be resolved by simultaneously pressing the double flash button and the car lock button to perform a match. Doors and trunk are not properly closed: It may be due to the doors and trunk not being properly closed. Under normal circumstances, improperly closed doors and trunk can prevent the car from being locked, causing the lock indicator light to stay on. You can check the doors and ensure they are properly closed to resolve the issue.
4
5
Share

What is the actual effect of Chevron Techron fuel additive?

Chevron Techron fuel additive can only be considered as a car health product, not a cure-all. Its main function is to have some cleaning effect on engine carbon deposits. Introduction to fuel additives: Fuel additive, commonly known as the third generation gasoline detergent (also known as gasoline detergent or fuel additive), is designed to address carbon deposit issues in the fuel system of fuel-injected vehicles. Fuel additives can help reduce carbon deposits in cars. Purpose of Chevron Techron fuel additive: This type of gasoline additive is used when the vehicle experiences poor fuel supply, engine shaking, unstable idling, increased fuel consumption, or poor acceleration caused by engine carbon deposits.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.