What is the Correct Installation Position for a Dash Cam?

1 Answers
Miles
07/25/25 5:07am
A dash cam should be installed at the upper center position of the front windshield, near the rearview mirror inside the car. The positioning should not only be centered but also utilize the small gap to the right rear of the rearview mirror for installation. Then, adjust the angle properly from the driver's seat. Below is more information about dash cams: 1. A dash cam is a device that records images, sounds, and other related information during vehicle travel. 2. The primary function of a dash cam is similar to an aircraft's black box. Installing a dash cam enables traffic police to accurately and swiftly handle traffic accidents, facilitating quick clearance of the scene to restore traffic flow and helping to create a smooth traffic environment.
Was this review help?
20
5
Share
More Forum Discussions

What is the car throttle cleaning tutorial?

Car throttle cleaning tutorial details are as follows: 1. Engine disassembly: You need to remove the engine cover and some of the air pipes around the throttle. These pipes need to be removed, and their positions should be remembered; When removing the air pipe on the throttle, using the appropriate tool can quickly remove it. The side of the throttle close to the combustion chamber is usually dirty, with black carbon deposits, which is the main part to be cleaned; 2. Cleaning: Cleaning the throttle is mainly to remove the above-mentioned carbon deposits. You can use a special throttle cleaning solution or cleaner. Spray the cleaner onto the parts of the throttle with more carbon deposits and wait for it to dissolve the carbon, which takes about 5-10 minutes.
13
3
Share

What are the models of Audi sports cars?

Currently, Audi offers only two sports car models: the TT and the R8. Here are the relevant details: 1. The TT comes in two variants: the 2.0T-FSI and the 3.2-quattro. The 2.0T is equipped with a 2.0-liter gasoline direct-injection turbocharged engine, delivering a maximum power of 147 kW (200 horsepower), accelerating from 0 to 100 km/h in 6.4 seconds, with a top speed of 240 km/h. The 3.2 quattro features a 3.2-liter V6 engine, producing a maximum power of 184 kW (250 horsepower), achieving 0-100 km/h in 5.7 seconds, and reaching a top speed of 250 km/h. 2. The R8: The R8 is Audi's first mid-engine supercar in history, powered by a 4.2-liter V8-FSI engine with a maximum output of 420 horsepower. It accelerates from 0 to 100 km/h in just 4.6 seconds, with a top speed of 301 km/h. The car incorporates many cutting-edge technologies (such as LED headlights).
3
0
Share

What is the current scrapping age limit for sedans?

For household 5-seat sedans and 7-seat SUVs, as well as non-commercial small and micro vehicles, there is no usage age limit. When the normal mileage reaches 600,000 kilometers, the state will guide the vehicle to be scrapped. In addition to the above-mentioned vehicles, small and micro non-commercial passenger vehicles, large non-commercial sedans, and wheeled special machinery vehicles also have no usage age limit. Commercial vehicles have scrapping age limits, as follows: Small and micro taxi passenger vehicles have a scrapping age limit of 8 years, medium-sized taxi passenger vehicles have a scrapping age limit of 10 years, and large taxi passenger vehicles have a scrapping age limit of 12 years. Bus passenger vehicles have a scrapping age limit of 13 years, other small and micro commercial passenger vehicles have a scrapping age limit of 10 years, and large and medium-sized commercial passenger vehicles have a scrapping age limit of 15 years. Micro commercial trucks have a scrapping age limit of 8 years, light and large commercial trucks have a scrapping age limit of 10 years. The vehicle scrapping process is as follows: The car owner applying for scrapping and renewal must fill out an "Application Form for Vehicle Modification, Transfer, Alteration, Suspension, or Scrapping" and affix the owner's seal. The registration office will accept the application and issue a "Vehicle Scrapping Notice" for vehicles that have reached the scrapping age limit. For vehicles that have not reached the scrapping age limit, the vehicle inspection office will determine if they meet the scrapping standards and issue a "Vehicle Scrapping Notice". The owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The owner must submit the "Modification Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the vehicle inspection office for verification and signature. The license plate will be reclaimed, and the scrapping registration will be processed according to regulations. Special Notes: According to Article 30 of the "Motor Vehicle Registration Regulations", if the vehicle cannot be driven back to the registration location due to damage, the owner can hand over the scrapped vehicle to a local motor vehicle recycling company. If a commercial vehicle is converted to a non-commercial vehicle, it must be scrapped according to the original commercial vehicle's scrapping time. According to Article 43 of the "Motor Vehicle Registration Regulations", after completing the transfer or cancellation of motor vehicle registration, the original owner can apply to use the original license plate number when registering a new motor vehicle. The application to use the original license plate number must meet the following conditions: (1) The application must be submitted within six months after the transfer or cancellation of registration; (2) The owner must have owned the original vehicle for more than three years.
3
1
Share

What to Do When the Rear Wheels of a Car Lock Up After Rain?

After rain, the rear wheels of a car may lock up because the contact area between the brake drum and brake pads rusts after exposure to rainwater, causing them to stick together. If this happens, first try gently rolling the wheel back and forth to loosen the rust. Alternatively, pour hot water over the brake pads and drum to separate them. Dangers of Driving with the Handbrake Engaged: Driving with the handbrake on increases wear and tear on the braking components, especially at higher speeds, and can also damage the tires. Prolonged use of the handbrake can cause the rear wheels to lock up, generate smoke due to friction, and significantly impair braking performance. Precautions for Using the Handbrake: Do not pull the handbrake all the way up. Over-tightening can deform the handbrake cable, shorten its lifespan, and reduce its ability to retract properly. This can also weaken the effectiveness of the handbrake. Function of the Electronic Parking Brake: The basic parking function of the electronic parking brake extends to the automatic parking function AUTOHOLD. The AUTOHOLD technology allows drivers to avoid prolonged braking when the vehicle is stationary. When the automatic electronic parking brake is engaged, it prevents unnecessary sliding—simply put, the vehicle won't roll away.
10
4
Share

Can Car Wheels Be Replaced?

Car wheels can be replaced, but the new wheels must have the same specifications as the original ones before replacement. For the sake of car safety and performance, wheels cannot be changed arbitrarily. Although the structure of tires may seem simple, changing the tire size can lead to significant alterations in many vehicle parameters. Related information: 1. Wheel: It is a metal component of a car used to support the tire's inner contour, mounted on the axle at the center, also known as a rim, steel ring, or hub. Wheels come in various types based on diameter, width, manufacturing method, and material. 2. Classification: In the market, wheels can be divided into two main categories by material: steel wheels and alloy wheels, each with its own advantages and disadvantages.
6
1
Share

Can I Add Mineral Water to the Wiper Fluid?

Adding mineral water to the wiper fluid is not recommended. Here are the reasons why you should avoid using mineral water in your wiper fluid: 1. Mineral water lacks cleaning properties: It contains impurities and scale, which can clog the fluid channels and nozzles over time. 2. Additional information: It is advisable to use dedicated windshield washer fluid for cleaning the front windshield. In winter, ensure the washer fluid has a sufficiently low freezing point. Before long-distance or highway trips, it's recommended to top up the washer fluid, as running out of it can impair the driver's ability to clean the windshield while driving.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.