What is the correct ignition operation for Subject 3?

[Juan]

Press the brake pedal with your right foot, insert the key into the ignition, and turn it clockwise to the "start" position, holding for 1-2 seconds. Press the clutch with your left foot, shift into 1st gear, and then gradually release the clutch. If you feel the car body vibrating, immediately control the clutch. After releasing the brake, gradually release the brake pedal. Do not get up immediately, and the car will move forward steadily. After stalling in Subject 3, first shift back to neutral, then ignite, and follow the normal starting sequence.

[Bo]

When taking the Category 3 driving test, the correct ignition procedure is a crucial step to ensure safe vehicle startup. You must first press the brake pedal to confirm the gear is in neutral or park position, then insert the key or press the start button while stabilizing the steering wheel. Wait until the engine starts and dashboard lights turn off before shifting to the correct gear for driving. During the test, examiners pay special attention to this detail – forgetting to brake or incorrect gear position will result in immediate point deduction or even failure. During practice, I've developed this habitual sequence: confirm the handbrake is engaged, settle properly before operation to prevent sudden vehicle lurching upon startup. Beginners often panic, but repeated simulations will make the operation smoother. Remember, standardized ignition isn't just for passing the test – it's fundamental for driving safety.

[OPenelope]

When I was learning to drive, the instructor repeatedly emphasized the importance of standard ignition procedures: press the brake firmly, ensure the gear is in neutral, then turn the key to start. If the gear is incorrectly engaged or the brake isn't pressed, the engine may shake or even stall, resulting in an immediate zero score on the test. During my first attempt, I forgot to press the brake due to nervousness but managed to recover. Now it's a habit to check the surroundings before ignition and wait for the engine to stabilize before releasing the handbrake. These small details prevent accidents on real roads, such as rolling back on a slope or damaging the transmission. It's advisable to practice with an experienced driver to minimize mistakes.

[VanAmy]

As someone frequently working with cars, the essence of properly starting the engine in Driving Test Part 3 is vehicle protection: you must first press the brake, confirm the gear is in neutral, and then start the ignition. If the brake isn't pressed and the gear is in drive or reverse, the motor will directly drive the wheels, causing impact damage to the transmission. Only after the dashboard displays normal readings should you proceed to the next step. The test is strict because it reflects fundamental safety awareness. In daily practice, regularly check the battery and ignition system to avoid malfunctions. Simply put, developing this sequential habit significantly enhances safety.

[Janelle]

I think the ignition operation in Subject 3 focuses on safety: firmly press the brake, ensure the gear is in neutral, then turn the key or press the button to start. Before starting, quickly glance at the dashboard and the surrounding environment to prevent sudden vehicle movement that could cause danger. Most exam failures are due to mistakes in this step, such as failing to press the brake and causing the engine to stall. I once saw a novice improperly ignite on a slope, leading to the car rolling and causing an accident, so it's good to develop the habit of using the handbrake as an aid. Standardized operation is not just an exam requirement but also helps extend the car's lifespan. Practice a few more times to get familiar with it, and don't rush the operation.