What is the Correct Charging Method for Electric Vehicles?

What to Do When a Car Stalls After Driving Through Water

When a car stalls after passing through water, first remain calm and immediately turn off the ignition switch. Do not attempt to restart the engine. Quickly disconnect the negative terminal of the battery to prevent electrical short circuits in the vehicle's electronic components due to water exposure. Then, move the car to a safe location, ideally positioning it with the front higher than the rear. Here’s more information on driving through water: 1. After the car is out of the water, inspect the engine. First, check if water has entered the engine cylinders, as this can bend the connecting rods and damage the engine. 2. If water has entered the engine, remove the spark plugs, manually cut off the fuel supply and ignition systems, and then use the starter motor to crank the engine, allowing the water inside to be expelled.

18

4

Share

How to Switch Between the Three Driving Modes of the Camry?

The usage of the three driving modes in the Camry is as follows: The Camry offers three driving modes—Eco Mode, Normal Mode, and Sport Mode. Eco Mode provides slower speeds with lower fuel consumption, Normal Mode is the standard driving mode suitable for daily use, and Sport Mode offers faster speeds, ideal for climbing hills or overtaking. For city driving, Normal Mode is recommended. For highway driving, Eco Mode is suggested as it enhances fuel efficiency. When overtaking on the highway, Standard Mode is preferable. Additional Info: The new Camry 2.0L model features the first 2.0L engine under the TNGA architecture, with thermal efficiency increased to 40%, improved power and torque output, and a new CVT transmission, making it the highlight of the new Camry. In other aspects, the new Camry performs almost identically to the previous model.

7

3

Share

How to turn on the air conditioning cold air in Changan CS35?

Steps to turn on the air conditioning cold air in Changan CS35: Rotate the round knob with the AC mark to the right, then press the AC cooling switch. The Changan CS35 is equipped with manual air conditioning across all models, which requires manual operation to turn on or off. The air conditioning control area features two round knobs: the left knob controls the temperature and cooling of the air conditioning, while the right knob controls the air volume and internal circulation. The Changan CS35 is an SUV independently developed by Changan Automobile, featuring an overall sporty, sleek, fashionable, and high-tech design. The vehicle is equipped with advanced power technology and a new-generation Aisin SsII manual-automatic transmission, offering excellent handling.

11

5

Share

How to Repair Peeling Steering Wheel?

Solutions for peeling car steering wheel are as follows: 1. Purchase a thin genuine leather steering wheel cover and fit it over; 2. Carefully wrap it with high-quality adhesive tape or cotton cloth without affecting aesthetics; 3. The most fundamental solution: replace the steering wheel; 4. Remove the old leather and install a new genuine leather cover. Functions of genuine leather steering wheel: 1. The steering wheel wrapped with genuine leather offers better flexibility, providing a more refined and comfortable grip for the driver. 2. The friction coefficient between leather and the palm is more beneficial for precise steering control compared to plastic or rubber, preventing safety accidents caused by slippery hands leading to loss of steering control. 3. To a certain extent, it enhances the interior's premium feel.

16

3

Share

What is the actual fuel consumption of the Auman GTL460 automatic transmission?

The actual fuel consumption of the Auman GTL460 automatic transmission is around 32 liters per 100 kilometers. Here are specific methods to reduce fuel consumption: 1. The vehicle consumes the most fuel during low-speed acceleration, so gently pressing the accelerator pedal during startup and avoiding excessively high RPM can effectively reduce fuel consumption. 2. Avoid unnecessary high RPM as much as possible, as fluctuating engine speeds can significantly increase fuel consumption. 3. Perform regular maintenance, including oil changes and carbon deposit cleaning. 4. Try to avoid emergency braking. Anticipating road conditions in advance not only improves driving safety but also saves fuel, such as gradually slowing down before traffic lights and utilizing inertia to coast.

17

0

Share

Why is the reversing radar of Besturn X80 not beeping?

The reasons why the reversing radar of Besturn X80 is not beeping are as follows: 1. The reversing radar switch is turned off: There is usually a switch controlling the reversing radar on the central control panel inside the car. If it is turned off, the reversing radar will not work. Turn on the reversing radar switch; check if the two wires under the reversing switch have normal power supply. 2. Faulty reversing radar circuit: When the reversing radar circuit is aged or broken, the reversing radar will not function properly. 3. Damaged reversing radar: If the above issues are all ruled out, it is highly likely that components such as the reversing radar, controller, or alarm are damaged.

11

4

Share

What is the Correct Charging Method for Electric Vehicles?

What to Do When a Car Stalls After Driving Through Water

How to Switch Between the Three Driving Modes of the Camry?

How to turn on the air conditioning cold air in Changan CS35?

How to Repair Peeling Steering Wheel?

What is the actual fuel consumption of the Auman GTL460 automatic transmission?

Why is the reversing radar of Besturn X80 not beeping?

What are the differences between the new Pirelli P7 and the old P7?

Is It Legal to Cover the Truck Bed of a Pickup?

How to Deal with Water Mist in Headlights?

What is the ground clearance of the Changan CS35?