What is the coolant bleeding method for the Baojun 560?
2 Answers
The coolant bleeding method for the Baojun 560 involves first ensuring that the old coolant is mostly drained out. Then, slowly fill the radiator to the top, followed by filling the overflow tank to the top without replacing the radiator cap. At this point, start the engine and let it idle until it reaches normal operating temperature. As the coolant begins to circulate through the system, the engine will automatically expel any air trapped in the coolant passages. Coolant is a liquid containing special additives, primarily used in liquid-cooled engine cooling systems. The Baojun 560 measures 4670mm in length, 1810mm in width, and 1755mm in height, with a wheelbase of 2750mm. The front track is 1554mm, and the rear track is 1549mm. The vehicle's engine delivers a maximum horsepower of 150Ps, a maximum power output of 110kW, and a maximum torque of 230Nm.
I've been driving my Baojun 560 for several years, and bleeding the coolant is crucial—it's mainly about removing air from the cooling system to prevent overheating. Last month, I did it myself, and the method is quite simple: First, start the engine and warm it up to normal temperature, about 10-15 minutes until the fan kicks in, then turn off the engine but be careful of hot components to avoid burns. Locate the radiator cap or the dedicated bleed valve (usually near the radiator in the front engine bay), slowly open it a bit to let the air escape and bubbles out. Wait until all the air is released before tightening the cap. After that, check the coolant level and top it up if needed, preferably using the manufacturer-recommended type. It's important to inspect the coolant reservoir regularly—I check the level every 3 months. Proper maintenance makes the car more durable, especially for long trips where preventing overheating is key. If you're not confident doing it yourself, a quick visit to a repair shop works too—it takes about half an hour and doesn't cost much.
