What is the control principle of the 5-wire window regulator in the old Jetta?

1 Answers
VanAyla
07/30/25 4:48am
The control principle of the 5-wire window regulator in the old Jetta is based on the circuit control line principle. Here are some relevant introductions about the new Jetta: 1. Exterior design: The headlights are paired with currently popular black base frames, exquisite and elegant chrome grilles, and the design of the front and rear bumpers integrates seamlessly with the Jetta's simple and rugged body, making the combination of the front end, fenders, and side body more perfect. In terms of interior design, avant-garde, fashionable, and innovative elements are incorporated, forming a unified interior style with other configurations in the car, which is comfortable and aesthetically pleasing. In terms of vehicle dimensions, the interior space is more spacious, providing a more comfortable ride, better meeting the needs of Chinese consumers for a dual-purpose family and business sedan. 2. 1.4L EA211 engine: The new Jetta 1.4L model is equipped with a 1.4L EA211 engine, which reaches its maximum power output of 66kW at 5500 rpm and its maximum torque of 132N·m at 3800 rpm. The small-displacement engine not only brings lower usage costs to users but also achieves energy savings and environmental protection.
Was this review help?
5
5
Share
More Forum Discussions

How to Remove the Rear Seat of Lavida?

To remove the seat cushion, generally place your hands under the bottom of the seat cushion and lift it upwards, then flip the lifted seat cushion forward. Push the connecting shafts at both ends towards the middle to release the metal shafts from the clips, and the seat cushion can then be removed. To fold down the seat back, lift the switches on both sides of the backrest, then use your hands to pull it forward.
11
1
Share

How to Check if a Car Compressor is Working Properly?

By observing the pressure, turn on the air conditioning, and the low-pressure side gauge should drop. If it does not drop or drops very little, the compressor can be determined to be faulty. Disconnect the compressor's low-pressure pipe, block the rear end of the high-pressure side pipe fitted with a pressure gauge, and then increase the engine speed to about 2000 RPM. At this point, the compressor's high-pressure side pressure should be around 1.5MPa, and there should be no significant change in pressure after the engine is turned off. Otherwise, the compressor can be determined to be faulty.
3
2
Share

What Lights Should Be Used When Driving on the Highway at Night?

When driving on the highway at night, you should turn on the width indicator lights, high and low beam headlights, and turn signals. Below is a detailed introduction to the use of lights on highways: 1. Width indicator lights. When driving at night, whether on the highway or ordinary roads, the width indicator lights must be turned on. These are small lights that, when activated, illuminate the front and rear width indicator lights as well as the rear license plate light. 2. High and low beam headlights. You can use high beams when driving on the highway at night, but it's important to use them appropriately. If the distance to the vehicle ahead is large, exceeding 150 meters, you can use high beams; when the distance decreases, you should switch to low beams. When meeting another vehicle on the highway, if the central divider can completely block the light, you can keep the high beams on; but if grass, roadside trees, or metal railings cannot fully block the light, you should switch to low beams when the distance between the two vehicles is 150 meters. 3. Turn signals. Turn signals must be used when changing lanes, overtaking, entering, or exiting the highway on the highway, and you should only change lanes after ensuring it is safe to do so, to prevent vehicles behind or in adjacent lanes from reacting in time.
13
5
Share

How to reset the maintenance light on a Citroen C-Quatre?

Turn off the ignition switch of the C-Quatre, then press and hold the maintenance mileage reset button. After turning on the ignition switch, the odometer will start counting down. When the display shows "=0" and the maintenance light goes off, it means the maintenance indicator light has been successfully reset.
15
1
Share

How to Use ABS?

ABS can shorten the braking distance, but when driving a car equipped with ABS, don't be too casual. Following too closely, making sharp turns or forcing lane changes are all dangerous. Hold the steering wheel firmly and step on the brake quickly and decisively with full force. During the car's braking process, the ABS starts working.
1
2
Share

How to Set Cruise Control on a Focus?

Press and release the ON button to set the speed, accelerate the vehicle to the desired speed, press and release the SET+ button, then release the accelerator pedal. If the vehicle speed decreases by more than 16 km/h compared to the speed set by the owner when going uphill, the cruise control will be canceled.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.