What is the comprehensive fuel consumption of the Passat?

How to Turn Off the Position Lights?

To turn off the position lights, you need to rotate the knob on the light control lever located on the left side of the steering wheel to the OFF position. Here is some information about position lights:1. Introduction: Position lights are warning lights located at the front and rear edges of the vehicle. Large trucks also have position lights on the roof and sides. These lights are installed along the edges of the vehicle's roof, indicating both the height and width of the vehicle.2. Relative Position Requirements for Position Lights and Corresponding Side Marker Lights: In the direction of each light's reference axis, the projection distance between the closest points on the visible surfaces in a transverse vertical plane should be no less than 400mm.

12

4

Share

How much engine oil should be added to the 2018 Magotan 330?

The 2018 Magotan 330 requires 6 liters of engine oil. Engine oil, also known as engine lubricant, serves multiple functions such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. It is often referred to as the 'blood' of a car. Below are the key functions of engine oil: 1. Friction reduction: A sufficiently thick oil film separates the surfaces of moving parts, thereby minimizing wear. 2. Sealing: Engine oil forms a seal between the piston rings and pistons, reducing gas leakage and preventing contaminants from entering. 3. Rust prevention: The lubricant adheres to part surfaces, protecting them from water, air, acidic substances, and harmful gases. 4. Shock absorption: When pressure in the engine cylinder rises sharply, the sudden increase in load on the pistons, piston rings, connecting rods, and crankshaft bearings is mitigated through the lubricating transmission of the bearings, cushioning the impact. 5. Cleaning: High-quality engine oil can carry away carbon deposits, sludge, and metal wear particles from engine components back to the oil pan, cleaning the parts as the oil circulates.

13

2

Share

What are the differences between formal and informal driving schools?

Here are specific methods to distinguish whether a driving school is formal or not: 1. Business qualifications: A formal driving school should have a "Training License" approved and issued by the local competent authority's Automobile Maintenance Industry Management Office, a "Business License" issued by the Industrial and Commercial Bureau, and a "Tax Registration Certificate" issued by the Tax Bureau. When students register, formal driving schools will sign a "Driving Training Contract" with them to ensure the rights and obligations of both parties. If a driving school neither has the above three certificates nor is willing to sign a contract with students, then it is a completely fake driving school. 2. Teaching facilities: A formal driving school should have its own classrooms, models, teaching tools, and training grounds. Many affiliated driving schools, however, arrange for students to practice directly on roads with fewer vehicles. Additionally, the number and grade of training vehicles owned by the driving school are also a standard to distinguish between "genuine" and "fake" driving schools. Formal driving schools can generally provide various types of vehicles such as trucks, cars, and jeeps for students to learn, while most affiliated driving schools always use a limited number of simply refurbished vehicles to cope with students. 3. Fee standards: A formal driving school should have reasonable fee standards, which are clearly marked prices supervised by the local price department, specifying what certificate to learn, what vehicle to use, and how much to charge. It is understood that due to the large scale of formal driving schools and the high cost of various teaching expenses, the fees cannot be particularly cheap. Moreover, before registration, be sure to ask clearly whether the tuition fee includes other miscellaneous fees. If it does, the driving school must clearly state it on the issued receipt so that there will be evidence for future reference. Generally, affiliated driving schools appear to charge lower fees, but after registration, they will charge under various names, making the total cost possibly higher than that of formal driving schools. 4. Coach quality: According to relevant regulations, only coaches with a "Driving School Coach Qualification Certificate" can train students. Coaches in a formal driving school must also pass theoretical, road, and pile tests like students to obtain the qualification certificate. On the contrary, coaches in informal driving schools are mostly temporary arrangements to fill the facade, lacking both qualification certificates and comprehensive knowledge. Before registration, students can verify whether the school's coaches have formal qualification certificates to infer the authenticity of the driving school. 5. Driving school reputation: When choosing a driving school, check its reputation online to see how many complaints there are. Additionally, ask the school office if there is a complaint hotline and corresponding rules and regulations. It is best to choose an AAA driving school recognized by the transportation department. AAA refers to driving schools that have reached A-level in integrity, service quality, and teaching equipment. 6. Service quality: The transportation management department conducts an annual qualification review and certification of driving schools. Currently, there is no government-organized evaluation. Therefore, when registering, attention should be paid to the quality of its services. Do not just listen to one side; choose a driving school with high credibility carefully. It is best to choose those driving schools that have passed the quality management system certification.

11

2

Share

When Should the Focus Have Its Transmission Fluid Changed?

Transmission fluid is generally recommended to be replaced every 40,000 kilometers or so. Precautions for changing transmission fluid: 1. Fluid replacement method: Due to the complexity inside the transmission, a circulation machine should be used for fluid replacement to ensure impurities are removed simultaneously. 2. Fluid selection method: When selecting transmission fluid for replacement, strictly adhere to the manufacturer's requirements. Avoid using non-OEM transmission fluid, and never opt for counterfeit or substandard products to save money. 3. Special circumstances: For vehicles with different models but the same transmission brand, it is advisable to have the transmission fluid changed at an authorized 4S dealership. Although the transmission brand may be the same, factors such as workmanship, materials, and tuning can vary by brand and model. Never compromise quality for minor savings in this scenario.

14

0

Share

What to Do When Idle Speed Stays at 1000 RPM?

Solutions for idle speed staying at 1000 RPM are as follows: 1. Clean the idle speed control valve: Go to the car's 4S store or repair shop to clean the idle speed control valve. 2. Inspection and repair: If the problem persists, it is recommended to inspect and repair the car's idle speed system. Information about car idle speed is as follows: 1. Car idle speed: Refers to a working condition. When the engine is idling, it is called idle speed, meaning the car is in neutral gear. The engine speed during idle is called idle speed. 2. Adjustment: Idle speed can be adjusted by changing the throttle opening size, idle fuel supply, etc.

20

0

Share

How to Remove the Chrome Strips on Car Windows?

Use a hair dryer to heat the adhesive strips, which will expand when heated and can then be removed. Below are some related issues about chrome strips on car windows: 1. Function: The decorative chrome strips on car windows serve both decorative and wind-blocking purposes. Car windows are an important part of the vehicle body, designed to meet the needs of interior lighting and ventilation. 2. Hazards: Improper installation of chrome strips during the process can easily cause the door panel gaps to widen, leading to resonance and noise when the vehicle is moving or the audio is playing. Chrome strips are usually attached directly to the car body using double-sided tape. Over time, exposure to sun and rain can cause the strips to lift at the edges of the windows. Not only does this fail to achieve an aesthetic effect, but the strips may also be blown off during high-speed driving.

18

3

Share

What is the comprehensive fuel consumption of the Passat?

How to Turn Off the Position Lights?

How much engine oil should be added to the 2018 Magotan 330?

What are the differences between formal and informal driving schools?

When Should the Focus Have Its Transmission Fluid Changed?

What to Do When Idle Speed Stays at 1000 RPM?

How to Remove the Chrome Strips on Car Windows?

Differences and Similarities Between Positive Profile Shift Gears and Standard Gears

When is the Guangzhou Auto Show?

How to Determine the Parking Points for Reversing into the Garage in Subject 2?

How to Use the Roof Rack on a Car?