What is the complete process of the simulated voice prompts for the Subject 3 driving test?

2 Answers
McAna
07/24/25 1:15pm
Voice prompts include: Please turn on the headlights, drive at night under conditions of poor lighting without streetlights, drive closely behind a vehicle in the same direction at night, and switch the headlights to high beam. Here are the detailed instructions: Please start and continue the test: Turn on the left turn signal (wait for more than 3 seconds before turning the steering wheel), press the clutch all the way down and shift to 1st gear, honk the horn, and release the handbrake. If starting on a slope, you can lightly press the brake with your right foot to prevent rolling back when starting. Look back to observe the traffic behind, confirm safety, then slowly release the clutch. When reaching the semi-engaged state, move your right foot from the brake to the accelerator, press the accelerator to add power, and start smoothly. After starting, turn off the turn signal. Voice prompt to change lanes: Turn on the left turn signal, look back to observe the traffic behind. After confirming safety, wait for the turn signal to be on for 3 seconds before turning the steering wheel. After completing, turn off the turn signal. (Note: Do not change lanes within 30 meters of an intersection).
Was this review help?
1
2
Share
Carolyn
08/11/25 7:18am
I just went through the Level 3 driving test, and the simulated voice instructions made me quite nervous. As soon as the examiner got in the car, he said 'Please start the vehicle,' followed by continuous commands: 'Fasten your seatbelt,' 'Turn on the headlights,' 'Prepare to move off.' During the drive, the voice would instruct 'Please turn left' or 'Change lanes to the right,' and reminded me to 'use the turn signal and check the rearview mirror' when 'pulling over.' After parking, there was the 'Turn off the engine' command, and finally 'The test is over.' The whole process took about 10 minutes—the voice was clear but mechanical, and I had to react quickly, especially when turning at intersections, making sure to keep the steering wheel steady. Fortunately, I had practiced enough, or else it would have been easy to make mistakes. After finishing, I relaxed and shared my experience with friends.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

What are the impacts of under-invoicing when buying a new car

Buying a new car with under-invoicing has the following impacts: Lower valuation during second-hand transfer: If the invoice price provided to the car owner is low, when trying to sell the car, buyers will only refer to the price on the invoice, resulting in a lower selling price. When attempting to transfer the car, buyers will only consider the invoice price, leading to a lower transfer price. Difficulty in obtaining full compensation for theft or accident claims: Insurance coverage for theft and vehicle damage is generally calculated based on the invoice price. If the vehicle is stolen or involved in an accident, the owner may suffer losses and not receive full protection. Inadequate compensation when claiming from the manufacturer: When seeking compensation from the manufacturer for vehicle quality issues, it will be difficult to claim based on the actual purchase price, and compensation will only be calculated according to the invoice price.
13
3
Share

What is the difference between 10w50 and 10w40?

Here are the specific differences between 10w40 and 10w50: Different viscosity: The number after 'w' represents the high-temperature viscosity of the engine oil. The larger the number, the higher the viscosity. Therefore, 10w50 engine oil has higher viscosity. Different usage periods: 10W40 is generally suitable for all seasons, while 10W50 is more suitable for large-displacement vehicles in summer. Different sealing properties: 10W50 has better sealing performance. Different fuel consumption: The higher the viscosity, the higher the fuel consumption. Therefore, 10W50 engines consume more fuel, while lower viscosity has the characteristic of saving fuel.
7
4
Share

Will highways be closed due to snow?

Highways may be closed due to snow. The closure of highways during snowy weather depends on factors such as the regional scope and changing trends of the weather, visibility, and traffic volume. Not every snowfall leads to a highway closure. Here are the situations when highways may be closed: Natural disasters: Such as earthquakes, landslides, mudslides, and other disasters that damage the road surface; Severe natural weather conditions: Such as strong winds, typhoons, blizzards, severe frost, etc.; Policy-related closures; Serious multi-vehicle traffic accidents on the highway. To check if a highway is closed, you can call the highway service hotline for inquiries.
11
3
Share

How to Maintain a Steady Speed in Subject 2?

Master the correct posture for pressing the clutch. First, place the ball of your foot on the clutch pedal with your heel resting on the ground as a support point. When the clutch is pressed to its lowest point, keep your knees slightly bent. While driving, women should avoid wearing high heels or thick-soled shoes, as these can hinder accurate perception of the clutch's position. Additionally, avoid pressing the pedal with just your toes or lifting your heel off the ground, as this may result in insufficient force. Students should be able to accurately sense the semi-engaged state of the clutch. Note: The semi-engagement position of the clutch varies from car to car—some require lifting it high, while others only need a slight lift for the car to move. When starting, slowly lift the clutch to the semi-engagement point, then release the brake until the car gradually moves forward.
6
3
Share

What to Do When the Engine Sometimes Fails to Start?

If the engine sometimes fails to start, you can go to a 4S shop to remove carbon deposits from the vehicle. Below is relevant information about car engine maintenance: Use qualified lubricating oil: For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the requirements specified by the manufacturer. Regularly change the oil and filter: To avoid malfunctions, the oil should be changed regularly according to usage conditions, and the oil level should be moderate (generally up to the upper limit of the oil dipstick). Additionally, when the filter is clogged and oil cannot pass through the filter element, it may burst the filter element or open the safety valve, allowing oil to pass through the bypass valve and still carry contaminants back to the lubrication parts, accelerating engine wear and worsening internal pollution.
4
0
Share

How to Activate One-Touch Window Roll-Up?

Taking the Tiguan as an example, the steps to activate one-touch window roll-up are as follows: Roll the window up to the top: Press the button on the armrest. Before activating the one-touch roll-up/down function, the first step is to start the vehicle. In the second gear position, press the switch all the way down, then lift the button to roll the window up to the top, holding each position for 5 seconds without moving. Select in the infotainment system: MENU - Car - Left Control Button - Car Settings - Central Locking - Long Press to Open Windows. Below is an introduction to the Tiguan: The Tiguan is equipped with industry-leading 1.8TSI and 2.0TSI engines, offering powerful performance and higher fuel efficiency, truly representing the future. The Volkswagen Tiguan comes standard with ESP body stability system, EBD electronic braking system, and ASR traction control. Some less common features like EDS electronic differential lock, EPB electronic parking brake, auto-hold function, and TPR tire pressure monitoring system are also standard configurations on the Tiguan.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.