What is the coding for the Lavida airbag control unit?

1 Answers
JasmineMarie
07/29/25 10:49am
Lavida airbag control unit coding is 12344. Working principle of airbags and airbag warning light: Airbags are generally composed of sensors, microprocessors, electronic control units, airbag covers and support rings, airbags, airbag modules, etc. The illumination of the airbag warning light may be caused by a malfunction in one of these components. Reasons for airbag warning light illumination: The reason for the airbag warning light illumination may also be a false fault phenomenon. If the car battery is low or other electrical equipment in the car is damaged, it may affect the feedback voltage of the airbag, resulting in a fault code. In this case, generally clearing the fault code is sufficient.
Was this review help?
4
1
Share
More Forum Discussions

Are car turn signals up-right-down-left?

Car turn signals follow an up-right-down-left pattern. From the driver's perspective, up corresponds to the right turn, down corresponds to the left turn, pushing away activates the high beam, pulling closer activates the low beam, and a push-pull motion alternates between high and low beams. When observing a need to turn ahead while driving, it is essential to activate the turn signal approximately 10 seconds in advance to alert vehicles behind to take timely measures, such as slowing down, stopping, or waiting, to avoid collisions or even rear-end accidents. As signal lights, turn indicators primarily serve to inform surrounding vehicles of the driver's intended direction change during daily driving, prompting other vehicles to yield and prevent collisions. Therefore, whether turning, changing lanes, overtaking, starting, or parking, whenever the vehicle needs to steer away from its current lane, the turn signal should be activated in advance. This is a fundamental principle of safe driving.
13
3
Share

Will driving without compulsory traffic insurance result in a 12-point deduction?

Driving without compulsory traffic insurance does not result in a 12-point deduction, but a 1-point deduction. Additionally, if caught by traffic police while driving without compulsory traffic insurance, the following penalties will be imposed: 1. A fine of twice the original cost of the compulsory traffic insurance must be paid; 2. The vehicle will be impounded until the compulsory traffic insurance is purchased. If the vehicle owner discovers that the compulsory traffic insurance has expired, renewing it within 3 months will still allow for a discount. However, if the renewal is delayed beyond this period, the discount will no longer be available, and the renewal process will become more complicated. If the compulsory traffic insurance was not paid for the previous year, there is no need to make up the payment for the current year. During the first 6 years of a new vehicle, inspections are required every 2 years, meaning that if the compulsory traffic insurance is not paid for 24 months, the vehicle will not be eligible for annual inspection. Furthermore, if the compulsory traffic insurance expires and the owner has not purchased commercial insurance, in the event of an accident, the owner will face substantial compensation costs, all of which must be borne by the owner themselves.
12
5
Share

What vehicles can be driven with an A2 driver's license?

A2 driver's license is authorized to drive tractor vehicles, which can tow heavy-duty and medium-duty full trailers and semi-trailers. Other vehicle types that can be driven with an A2 license include: B1 (medium-sized buses), B2 (large trucks), C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled cars), and M (wheeled self-propelled machinery). According to the relevant provisions in the Ministry of Public Security Order No. 123 on the application and use of motor vehicle driver's licenses, among the full trailers and semi-trailers driven with a legally valid A2 driver's license in China, a full trailer is one where the total weight of the trailer is borne by itself, while a semi-trailer is one where part of the total weight of the trailer is borne by the tractor vehicle.
12
0
Share

What Are Some Tips for When the Key Won't Come Out?

Tips for when the key won't come out: 1. While gently turning the key with your right hand, wiggle the steering wheel left and right with your left hand, and the key should turn; 2. Check if there are any obstructions in the gear slot. If so, remove them, then start the car, shift the gear again to ensure it's fully back in position, and the key should come out. Reasons why the key won't come out: 1. The key can't be turned after insertion because the steering wheel wasn't returned to its proper position during the last parking, causing abnormal locking of the steering wheel; 2. The key can't be removed after turning off the engine because the automatic transmission isn't fully in the P (Park) position, failing to trigger the electronic sensor, or there are objects like coins in the gear slot blocking it from returning to position.
17
4
Share

What is the gear shifting mantra from first to fifth gear?

The gear shifting mantra from first to fifth gear is: For speeds between 10 to 20 km/h, you can use either 1st or 2nd gear; between 20 to 30 km/h, 2nd or 3rd gear can be used; between 30 to 40 km/h, 3rd or 4th gear; between 40 to 50 km/h, 4th or 5th gear; and for speeds above 50 km/h, use 5th gear. As speed increases, the gear should be shifted up accordingly. Failing to do so will keep the engine at high RPM, leading to a rapid increase in fuel consumption. 1st gear is for starting; 2nd gear is a transition gear, suitable for speeds up to about 30 km/h; 3rd to 4th gears are for city driving, suitable for speeds up to 60 km/h; and 5th gear is for fast driving, suitable for speeds above 70 km/h.
13
5
Share

What is the reason for the P light being on?

The reasons for the P light being on: 1. ABS function failure; 2. Severe brake pad wear leading to failure; 3. Brake oil not meeting requirements. Abnormalities in the braking system manifest as poor or failed braking, unilateral braking deviation, braking noise, brake drum overheating due to brake drag, parking brake failure, etc. The braking system mainly consists of four parts: the energy supply device, control device, transmission device, and brake. Its main functions are: 1. To decelerate or even stop a moving vehicle; 2. To maintain a stable speed for a vehicle going downhill; 3. To keep a parked vehicle stationary.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.