What is the clutch matching method for the Baojun 560 AMT?

3 Answers
CoraFitz
07/25/25 1:28pm
First, use a 431 diagnostic computer and connect it to the vehicle, then enter the transmission system directory. Click on the basic adjustment option for the system. At this point, you can observe the data stream.
Was this review help?
17
5
Share
McKeira
08/11/25 2:17pm
Regarding the matching method of the Baojun 560 AMT clutch, I have encountered similar issues while driving. Generally, clutch matching refers to resetting the electronic control unit to allow it to relearn driving habits. The steps are as follows: First, turn off the engine and disconnect the negative terminal of the battery for about ten minutes, then reconnect it. Next, start the engine without pressing the accelerator, keeping the car in neutral and letting it idle for two to three minutes. After that, shift into gear and drive at low speed on flat urban roads for about ten kilometers to allow the system to automatically adapt to the clutch and shifting points. This helps eliminate jerking and improves smoothness. When driving normally, avoid sudden acceleration, and regular maintenance can also prevent matching issues. If abnormalities persist after performing these steps, it is recommended to visit a professional repair shop to check for faults in sensors or actuators, as safety comes first.
Was this review help?
20
1
Share
Expand All
LawsonFitz
09/27/25 7:49am
Encountering mismatched clutches in the Baojun 560 AMT is actually quite common. Let me share my experience: There are multiple matching methods to choose from. One is the DIY approach - first turn off the engine and disconnect the battery cables, wait 15 minutes before reconnecting, start the car and let it idle in neutral for five minutes, then drive slowly to adapt for a few minutes. Another option is to visit a 4S shop or repair shop for calibration using specialized diagnostic tools, which is more precise. Clutch matching can make gear shifting smoother and prevent idling or response delays. When driving this model, it's recommended to drive several kilometers on smooth roads to let the system memorize the RPM and pedal position. Matching frequency depends on driving habits - problems tend to occur more frequently in congested urban driving. Remember to regularly check the brake and clutch connecting cables, as routine maintenance is crucial.
Was this review help?
20
1
Share
Expand All
More Forum Discussions

How to Maintain the Battery of an Electric Vehicle When Not in Use for a Long Time?

Electric vehicles left unused for extended periods can have the following impacts on the battery and corresponding solutions: 1. Avoid storing the battery in a discharged state: A discharged state occurs when the battery is not recharged promptly after use. In this state, sulfation is likely to occur, where lead sulfate crystals form on the plates, blocking ion channels and leading to insufficient charging and reduced battery capacity. The longer the battery remains idle in a discharged state, the more severe the damage. Solution: When the battery is not in use, charge it once a month to extend its lifespan. 2. Conduct regular inspections: If the range of the electric bicycle suddenly drops by more than ten kilometers in a short period, it is highly likely that at least one battery in the pack has issues such as broken grids, softened plates, or shedding of active material from the plates, leading to short circuits. Solution: Promptly take the battery to a professional repair facility for inspection, repair, or replacement.
6
1
Share

What are the gears of automatic and manual transmission cars?

Automatic transmission cars have gears such as P, R, N, etc., while manual transmission cars have gears from 1 to 5. Below is detailed information about the gears of automatic and manual transmission cars: 1. Automatic transmission cars: There are a total of five gears in automatic transmission cars: P, R, N, D, and S. P stands for Park, R for Reverse, N for Neutral, D for Drive, and S is also a driving position. The difference between D and S is that D is the regular shifting program, while S is the sport shifting program. 2. Manual transmission cars: Manual transmission cars have 1 to 5 forward gears and one reverse gear, with neutral in the middle. Gear 1 is used for starting, gear 2 for speeds between 20 to 40 km/h, gear 3 for 40 to 60 km/h, gear 4 for 60 to 75 km/h, and gear 5 for speeds above 75 km/h. The reverse gear is used for backing up.
14
4
Share

How should vehicle age be calculated?

Vehicle age refers to the service life of a car, calculated from the registration date on the vehicle's license. Below are detailed explanations about vehicle age calculation and related extensions: 1. Vehicle age system: A car's age refers to its service life, currently household vehicles can be used for 15 years. After reaching 15 years, the vehicle must undergo inspection every six months. If the vehicle passes the emission standard test, it can continue to be used; otherwise, if it fails the test, the vehicle will be mandatorily scrapped. 2. Service life of various motor vehicles: Different types of motor vehicles have different service lives. Small and micro rental passenger cars have a service life of 8 years, medium rental passenger cars 10 years, and large rental passenger cars 12 years. Small and micro lease passenger cars have a service life of 10 years, while large and medium lease passenger cars 15 years. Buses and trolleybuses have a service life of 13 years.
11
1
Share

Which Side of the Road Do Vehicles Drive on in the United States?

In the United States, vehicles drive on the right side of the road. Most countries around the world adopt left-hand drive vehicles that drive on the right side. Road traffic direction can be categorized into two types: driving on the left side of the road and driving on the right side of the road. Early automobiles had the driver's seat positioned in the center of the vehicle. Soon after, some automakers placed the driver's seat on the side closer to the road's centerline to better observe oncoming traffic from the opposite direction. Other manufacturers positioned the driver's seat on the roadside side to avoid collisions with obstacles such as walls, hedges, or ditches along the road. Practical experience demonstrated that the former approach was more conducive to maintaining road safety, thus becoming the standard practice for automakers. This led to the distinction between left-hand drive vehicles (with the driver's seat on the left front side) and right-hand drive vehicles (with the driver's seat on the right front side).
1
2
Share

What is the function of the vehicle's width indicator light?

Width indicator lights, also known as clearance lights, are primarily used to indicate the presence and approximate width of a vehicle, aiding other vehicles in judging during encounters and overtaking. Below are situations where width indicator lights should be turned on: 1. Driving in foggy conditions: Due to reduced visibility and blurred sight, it is necessary to turn on the width indicator lights along with the fog lights to provide a clear warning to other road users. 2. Rainy weather: They serve as a warning signal to both preceding and following vehicles, helping to minimize potential harm. 3. Night driving: It is mandatory to turn on the clearance lights. Traffic regulations require that rear tail lights and width indicator lights be activated during night driving to alert following vehicles. 4. Dusk: In the absence of streetlights and when vehicle lights are not very bright, it is still essential to turn on the width indicator lights for safety, ensuring other vehicles can see your car.
2
4
Share

Does the Air Conditioning Evaporator Need Cleaning?

The air conditioning evaporator needs cleaning. Here is a detailed explanation of why the air conditioning evaporator needs cleaning: 1. The air conditioning evaporator needs cleaning. The air conditioning evaporator is located inside the dashboard. When the air conditioning is turned on, the evaporator undergoes heat exchange, causing a large amount of condensation to form on its surface. At the same time, outdoor air entering the system may carry dust, bacteria, impurities, etc., which can adhere to the surface of the evaporator along with the condensation. 2. Additionally, when the air conditioning evaporator is not in use, it remains in a warm, dark, and humid environment for long periods, making it highly susceptible to the growth of mold and various bacteria. Once mold finds a suitable environment, it can multiply rapidly. Therefore, regular cleaning is necessary, and it is recommended to clean it once every year.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.