What is the Chinese name of the Geely Preface?

How many points are deducted for not using turn signals in Subject 2?

Not using turn signals or using them incorrectly will result in a deduction of 10 points per occurrence. The specific regulations are as follows: Failure to use or incorrect use of turn signals before starting, turning, changing lanes, overtaking, or parking will result in a deduction of 10 points. Turning less than 3 seconds after activating the turn signal before starting, turning, changing lanes, overtaking, or parking will result in a deduction of 10 points. There are 6 instances in Subject 2 where turn signals must be used: 1. Turn on the left turn signal when starting the vehicle. 2. Turn on the left turn signal when starting on the slope. 3. Activate the right turn signal when pulling over for parallel parking, stopping the vehicle 30 cm from the side line before reversing. 4. Turn on the left turn signal before shifting into reverse for parallel parking, as the steering wheel will be turned fully to the right during reversing, causing the front of the car to shift left. 5. Shift into drive and activate the left turn signal before exiting the parking space in parallel parking, turning it off promptly after exiting. 6. Turn on the left turn signal when entering the right-angle turn area, turning it off promptly after completing the turn. Subject 2 has a total score of 100 points, with evaluation criteria set for disqualification, 20-point deductions, 10-point deductions, and 5-point deductions. The following conditions must be met to pass the test: ① For large buses, tractors, city buses, medium buses, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. For small vehicles (C1, C2), the test includes five mandatory items: reversing into a parking space, parallel parking, slope parking and starting (canceled for C2), right-angle turns, and S-curve driving (some regions include a sixth item: high-speed card collection). For large vehicles (A1, A2, A3, B1, B2), the test includes: stake test, slope parking and starting, parallel parking, single-plank bridge crossing, S-curve driving, right-angle turns, limited-width gate crossing, continuous obstacle crossing, bumpy road driving, narrow road U-turns, as well as simulations for highways, continuous sharp mountain curves, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling.

9

2

Share

How to Replace Corolla Wiper Blades?

Replacing Corolla wiper blades involves the following steps: 1. Lift the metal wiper arm away from the windshield and maintain it in a stable position perpendicular to the windshield. 2. Press the tab and remove the old wiper blade, separating it from the metal arm. 3. Insert the new wiper blade, gently rotating it until the hook snaps into place to secure it. Below is an introduction to wiper blades: 1. Wiper blades, also known as windshield wipers, are devices used to remove raindrops and dust from the vehicle's windshield, improving driver visibility and enhancing driving safety. 2. The wiper motor employs a 3-brush structure for easy speed variation. The intermittent timing is controlled by a relay, utilizing the motor's return switch contacts and the relay's RC charge-discharge function to make the wiper operate at a set interval. The wiper blade rubber is the tool that directly clears rain and dirt from the glass. The rubber is pressed against the glass surface by a spring strip, and its lip must align with the glass angle to achieve the desired performance. 3. Typically, the car's combination switch lever has a wiper control knob with three settings: low speed, high speed, and intermittent. The top of the lever is the washer button; pressing it sprays washer fluid to clean the windshield in conjunction with the wiper. 4. The washer system is a common feature in cars today, consisting of a reservoir, pump, tubing, and nozzles. The fluid is divided into fine jets by the pressure from 2 to 4 nozzles, directed at the windshield to assist the wiper in cleaning it.

12

1

Share

How to Remove the Low Beam Light of Mistra

The method to remove the low beam light of Mistra is: remove the deflector cover, then you can directly take out the lamp holder, and then replace the bulb without separating the reflector bowl and the deflector cover. The illumination distance of the low beam light is about 30-40 meters. More details are as follows: 1. The bulb model for the low beam light of Hyundai Mistra is H7. Car bulbs are essential for ensuring driving safety and illuminating the road during nighttime driving. They contribute to safety and comfort while driving. Car bulbs fall under the category of automotive accessories, and specialized services focus on providing quality automotive products. Poor lighting conditions can easily cause eye fatigue and fail to provide adequate brightness and coverage for the driver. High-quality car bulbs offer better brightness and visibility, enhancing driving comfort and safety, ensuring confident driving. 2. Experiments show that when driving at 55 km/h at night, the stopping distance after immediate braking is exactly 30 meters. This means that if a situation is detected within the low beam's range and the driver brakes immediately, there will be no gap between the car and the obstacle. This assumes ideal conditions such as good vehicle and road conditions, as well as quick driver reaction. Higher speeds, poor vehicle or road conditions, or delayed driver reactions can lead to different outcomes. 3. Therefore, it is crucial to control speed during nighttime driving. On flat, wide, and well-lit roads, the use of high beams allows for slightly higher speeds. However, in complex situations such as oncoming traffic, uneven roads, turns, bridges, narrow roads, or intersections, it is advisable to slow down, generally keeping the speed below 40 km/h.

5

4

Share

How much windshield washer fluid does the Teana need?

Nissan Teana's windshield washer fluid requires approximately 4 liters. It is recommended to purchase concentrated windshield washer fluid, and the remaining can be diluted with water after adding. There are no specific restrictions on the type of windshield washer fluid for the Teana, so there are no brand requirements. When purchasing windshield washer fluid, simply ensure it is genuine. Additionally, in winter, it is necessary to choose an antifreeze-type windshield washer fluid. Windshield washer fluid, commonly known as car windshield cleaning fluid, is a consumable in automotive use. High-quality car windshield washer fluid is mainly composed of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. The functions of windshield washer fluid are as follows: 1. Cleaning performance: Windshield cleaner is formulated with various surfactants and additives. Surfactants typically have functions such as wetting, penetrating, and solubilizing, thereby achieving cleaning and stain removal. 2. Antifreeze performance: The presence of alcohol and ethylene glycol can significantly lower the freezing point of the liquid, thus providing antifreeze effects and quickly dissolving frost. 3. Anti-fog performance: A single-molecule protective layer forms on the glass surface. This protective film prevents the formation of fog droplets, ensuring the windshield remains clear and transparent with a clear view. 4. Anti-static performance: After cleaning with windshield cleaner, substances adsorbed on the glass surface can eliminate static charges on the glass surface, providing anti-static properties. 5. Lubrication performance: The ethylene glycol in windshield cleaner has high viscosity, which can provide lubrication, reduce friction between the wiper and the glass, and prevent scratches. 6. Anti-corrosion performance: Windshield cleaner contains various corrosion inhibitors, which are absolutely safe and non-corrosive to any metal, car paint, or rubber.

19

4

Share

What is the ground clearance of the Octavia?

The minimum ground clearance of the Octavia is 120 millimeters. The minimum ground clearance of the Octavia refers to the distance between the lowest point (excluding the wheels) and the supporting surface, which is used to characterize the vehicle's ability to pass over obstacles such as stones and tree stumps without collision. If the Octavia's ground clearance is higher, its off-road capability improves, but if the ground clearance is too high, the stability at high speeds may decrease. The Octavia is a compact car under SAIC Volkswagen Skoda. The dimensions of the Octavia TSI280 version are 4753 mm in length, 1832 mm in width, and 1469 mm in height, with a wheelbase of 2730 mm. Other versions measure 4675 mm in length, 1814 mm in width, and 1460 mm in height, with a wheelbase of 2686 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the Octavia's ground clearance is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Octavia's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a higher ground clearance may be preferred to avoid scraping or damaging the chassis.

7

0

Share

What Happens When a Car's Front Steering Knuckle is Damaged?

When the front steering knuckle of a car is damaged, the following symptoms may occur: 1. Uneven tire wear and vehicle pulling to one side. 2. Brake vibration, which can damage bearings and drive shafts. 3. Abnormal front tire wear and poor steering wheel return. 4. Unusual noises from the vehicle body. More information about the car steering knuckle is as follows: 1. The steering knuckle is one of the main components of a car's steering axle and an important part connecting the wheels and suspension. 2. The steering knuckle mainly consists of three parts: the supporting journal, flange, and fork frame, ensuring stable driving and sensitive transmission of driving direction.

11

1

Share

What is the Chinese name of the Geely Preface?

How many points are deducted for not using turn signals in Subject 2?

How to Replace Corolla Wiper Blades?

How to Remove the Low Beam Light of Mistra

How much windshield washer fluid does the Teana need?

What is the ground clearance of the Octavia?

What Happens When a Car's Front Steering Knuckle is Damaged?

How to Start the Great Wall ORA Electric Vehicle?

Does the Camry have a hybrid model?

What causes the Cadillac CT6 to shake during cold starts?

Is there an electronic version of the vehicle license?