What is the Chinese name of Dongfeng Honda Inspire?

Where is the OBD interface located on the Haima 2?

The OBD interface of the Haima 2 is located below the steering wheel. There is a U-shaped decorative panel, and after removing this panel, you can see a 16-pin plastic connector on the right side, which is the OBD interface. OBD stands for On-Board Diagnostics, a system that can monitor the working conditions of the engine's electronic control system and other functional modules of the vehicle in real-time during operation. The Haima 2 measures 3918mm in length, 1725mm in width, and 1518mm in height, with a wheelbase of 2500mm. It is equipped with a 5-speed manual transmission and has a top speed of 165 kilometers per hour. This car is a compact sedan powered by a 1.3L naturally aspirated engine, delivering a maximum horsepower of 97 kW and a maximum torque of 121 Nm.

17

0

Share

How long can a truck's annual inspection be overdue?

Truck annual inspections cannot be overdue for more than 30 days, and the inspection must be completed within the same month. After a truck is registered, it requires an annual inspection each year. After ten years, it requires two inspections per year. The documents needed for vehicle annual inspection include: the vehicle's registration certificate, valid compulsory traffic insurance policy, and vehicle and vessel usage tax. Precautions for vehicles that have not undergone annual inspection: Accident liability: For vehicles that fail to undergo annual inspection on time, the driver will bear full or primary responsibility for any traffic accidents caused, and the insurance company will not be liable. This is because the insurance policy specifies that vehicles with expired inspections are among the excluded from coverage. Mandatory scrapping: According to the "Mandatory Scrapping Standards for Motor Vehicles," if a motor vehicle fails to obtain an inspection compliance mark for three consecutive inspection cycles after the expiration of its inspection validity period, it will be mandatorily scrapped. The purpose of annual inspection is: To check whether the engine, chassis, body, and auxiliary equipment are clean, intact, and functional; whether the vehicle's paint is symmetrical and aesthetically pleasing; whether major general components have been replaced and match the initial inspection records. To verify whether the vehicle's braking performance, turning maneuverability, lighting, exhaust pipes, and other safety factors comply with the requirements of the "Technical Conditions for Safe Operation of Motor Vehicles." To inspect whether the vehicle has been modified, altered, or reconstructed; whether all records in the vehicle's registration certificate, license plate, and vehicle file match the current condition of the vehicle and if any changes have been made; and whether approval, alteration, or modification procedures have been applied for. To check whether the license plate printed on the vehicle, the vehicle registration certificate, and the enlarged license plate characters are damaged or illegible, and whether they need to be replaced.

2

5

Share

What Type of Transmission is Suitable for Aggressive Driving?

CVT transmissions are suitable for aggressive driving. Prolonged driving at low gears with extremely high speeds, high gears with low speeds, sudden acceleration, and hard braking all fall under the category of aggressive driving for CVT transmissions. Extended periods of aggressive driving can lead to engine oil burning, and in severe cases, may cause brake pad temperatures to rise, reduced braking efficiency, cylinder scoring, or even engine seizure. Below are some precautions regarding CVT transmissions: 1. Hill Rollback: When starting on a slope with a CVT, always use the handbrake for assistance. Otherwise, the CVT transmission may slip during power engagement, leading to vehicle rollback. 2. While Driving: Do not shift the gear lever to P, R, or N while the car is in motion. Although the transmission has a self-protection function, it is best to press the brake and wait until the car comes to a complete stop before shifting gears to avoid damaging the transmission.

2

Share

What to do if the car door is hit and the paint is chipped by someone else opening the door?

If the car door is hit and the paint is chipped by someone else opening the door, you can purchase paint of the same color code as the car's original paint online for touch-up. This method is relatively time-saving and labor-saving. There is also a special touch-up pen designed for repairing car paint, the purpose of which is to prevent the paint from rusting on rainy days. Car scratches are divided into three levels: slight scratches on the body, damage to the body's surface paint, and damage to the body's primer or even deformation. If the body's primer is damaged or even the sheet metal is deformed, it needs to be dealt with in time to avoid developing into rust in the future. To repair the body's primer and deformation, the paint on the corresponding part needs to be sanded off, then the sheet metal needs to be repaired, and finally, each layer of paint should be reapplied.

5

Share

How to Replace the Battery in an Older BMW Key?

The method to replace the battery in an older BMW key is as follows: 1. Before replacement, first understand the battery model of the key and purchase a new battery according to the specified model; 2. Remove the hidden mechanical key from the remote; 3. With the key back cover facing upwards, insert the mechanical key into the position where it was just pulled out, and gently pry to open the back cover; 4. Take out the old battery and replace it with a new one, ensuring the battery's positive and negative poles are not reversed, then snap the back cover back on. Taking the 2005 BMW model as an example: its dimensions are 5179mm in length, 1902mm in width, and 1484mm in height, with a wheelbase of 3128mm and a fuel tank capacity of 88L.

17

3

Share

What is the maintenance interval for FAW-Volkswagen vehicles?

It mainly depends on the type of engine oil used in the vehicle. There are generally three scenarios. Fully synthetic oil typically requires replacement every 10,000 kilometers or once a year. Semi-synthetic oil usually needs to be changed every 7,500 kilometers or every 7-8 months. Mineral oil generally requires replacement every 5,000 kilometers or every 6 months. Below is a detailed introduction about engine oil: 1. Overview: Engine oil, also known as engine lubricant (English name: Engine-oil), has a density of approximately 0.91×10³ (kg/m³). It serves multiple functions such as lubrication and friction reduction, auxiliary cooling, sealing and leakage prevention, rust and corrosion protection, and shock absorption. 2. Composition: Engine oil consists of two main components: base oil and additives. Base oil is the primary constituent of lubricating oil, determining its fundamental properties. Additives are used to compensate for and improve the shortcomings of the base oil, providing additional performance characteristics, making them an essential part of lubricating oil.

3

1

Share

What is the Chinese name of Dongfeng Honda Inspire?

Where is the OBD interface located on the Haima 2?

How long can a truck's annual inspection be overdue?

What Type of Transmission is Suitable for Aggressive Driving?

What to do if the car door is hit and the paint is chipped by someone else opening the door?

How to Replace the Battery in an Older BMW Key?

What is the maintenance interval for FAW-Volkswagen vehicles?

Is filing required for wheel hub painting?

Is it mandatory to service the car every six months?

Is there a subsidy for vehicle scrapping?

What is the emission standard of the 2011 Nissan Tiida?