What is the Chinese grade equivalent to SUS440C?

What is automotive body filler?

Automotive body filler refers to the putty used for cars. It is typically applied when a vehicle has relatively deep scratches to fill and level them. After application, the area is lightly sanded smooth with fine sandpaper, and finally touched up with a paint pen. The purpose of automotive body filler is to fill small imperfections, dents, scratches, or other processing marks after sanding, creating a smooth surface for the next coat of paint. Automotive body filler is characterized by high pigment and filler content, presenting as a thick paste that dries easily. Once dry, it becomes hard and fine-textured, making it easy to sand. Common types include water-based and oil-based varieties. Oil-based putty is further categorized into alkyd, nitrocellulose, perchloroethylene, epoxy, and other types, with nitrocellulose (currently modified with acrylic) being the most commonly used. Using automotive putty (body filler) for paint touch-ups may result in loss of gloss, which can be restored by polishing with a polisher and specialized abrasive compounds, preventing future gloss loss. Another issue that may arise is excessive orange peel texture, caused by excessive air pressure or moving the spray gun too quickly. Adjusting the air pressure to 2KPA and moving the spray gun slowly with 50% overlap during spraying can mitigate this. If excessive orange peel is noticed after baking, it can be resolved through sanding and polishing.

7

5

Share

What is the reason for the shaking when starting a cold Magotan?

The reason for the shaking when starting a cold Magotan is excessive carbon deposits inside the engine. The gasoline sprayed by the cold start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts, making it difficult to start the engine. Only when the carbon deposits become saturated with gasoline does the engine start more easily. After starting, the gasoline adsorbed on the carbon deposits is then sucked into the combustion chamber by the engine's vacuum, enriching the air-fuel mixture. This causes the combustible mixture to fluctuate between lean and rich, leading to idle shaking after a cold start. A simple method to deal with injector carbon deposits is to drive the car at high speeds on the highway or to drive at low gear but high speeds for a period of time, increasing the engine RPM. The purpose of this is to enhance the engine's air intake and gasoline flow, which helps in clearing the carbon deposits from the injectors.

2

3

Share

How to Adjust the Headlights of the Malibu?

Malibu headlight adjustment method: Use the wheel-shaped adjustment knob on the left side of the steering wheel, which has settings 0, 1, 2, and 3. Setting 0 indicates the front seats are occupied, 1 indicates all seats are occupied, 2 indicates all seats are occupied with items in the trunk, and 3 indicates the driver's seat is occupied with items in the trunk. This function adjusts the headlights to the appropriate height based on the vehicle's load, helping to reduce glare for other drivers. To adjust the headlight height, the low beam headlights must be turned on. Rotate the wheel clockwise or counterclockwise to adjust the headlight height.

6

1

Share

How to Reset the Maintenance Reminder on the Magotan?

Method to reset the maintenance reminder on the Magotan: First, press and hold the small wrench button on the instrument panel with your left hand, then turn on the ignition with your right hand. After that, release the small wrench button with your left hand and press the minute adjustment button on the time adjustment knob. Turn off the ignition, remove your left hand from the time button, and start the engine. The maintenance reminder will then disappear. The Magotan is a mid-size car launched by FAW-Volkswagen, with body dimensions of 4865mm in length, 1832mm in width, and 1471mm in height, and a wheelbase of 2871mm. In terms of power, the car offers two engine options: a 1.4T turbocharged engine and a 2.0T turbocharged engine with high and low power outputs. The transmission system is paired with a 7-speed dual-clutch gearbox.

1

2

Share

How to Replace the Coolant in a Magotan?

Method for replacing coolant in a Magotan: 1. Drain the old coolant; 2. Clean the cooling system; 3. Refill with new coolant until the liquid level reaches between the MAX and MIN marks; 4. Bleed air from the system; 5. Check the liquid level. Coolant is a liquid containing special additives, hence also called antifreeze. As the name suggests, coolant has two main functions: antifreeze and cooling. The antifreeze function ensures the car can operate normally in cold climates, while the cooling function helps lower the temperature of the car engine under continuous high-temperature operation. The Magotan has a body size of 4865mm in length, 1832mm in width, and 1471mm in height, with a wheelbase of 2871mm.

2

0

Share

Which country is Maserati from?

Maserati is from Italy, founded in Bologna, with its headquarters now located in Modena. Their emblem features a trident. Maserati was once part of Ferrari (a company majority-owned by Fiat) and is now directly owned by Fiat Chrysler Automobiles. Taking the Maserati MC20 as an example, it is equipped with a 3.0T 630 horsepower V6 engine and an 8-speed dual-clutch transmission, with the engine delivering a maximum power of 463 kW and a maximum torque of 730 Nm. The Maserati MC20 can reach a top speed of 325 km/h, featuring a 2-door, 2-seater hardtop coupe body structure and utilizing a twin-turbocharged intake system.

1

5

Share

What is the Chinese grade equivalent to SUS440C?

What is automotive body filler?

What is the reason for the shaking when starting a cold Magotan?

How to Adjust the Headlights of the Malibu?

How to Reset the Maintenance Reminder on the Magotan?

How to Replace the Coolant in a Magotan?

Which country is Maserati from?

Can You Start a Car While It's Charging?

How to adjust the time display on the Passat?

Can Car Windshield Washer Fluid Freeze?

What does it mean when a vehicle's registration exceeds its validity period?