···
Log in / Register

What is the Chevrolet Orlando?

1 Answers
Emiliano
09/01/25 6:08am

Chevrolet Orlando is known as the Orlando in China and is a compact car under the Chevrolet brand. Here are the specific details about the Chevrolet Orlando: 1. The Orlando's engine has a maximum power of 120 kW and a maximum torque of 230 Nm, paired with a 6-speed automatic transmission. 2. In terms of body dimensions, the Chevrolet Orlando measures 4684mm in length, 1807mm in width, and 1627mm in height, with a wheelbase of 2796mm. 3. The Orlando adopts Chevrolet's new-generation family design, offering versatile functionality.

Was this review help?
9
0
Share
More Forum Discussions

How to Open the Hood of a Volkswagen Golf?

Methods to open the hood of a Volkswagen Golf: 1. There is a hood release handle on the left side of the driver's compartment; pull it upwards firmly. 2. Move the hood latch to release it and prop up the support rod to prevent the hood from suddenly closing during inspection. It is important to note that when inspecting the engine compartment, wait until the engine temperature has cooled down for safety. The Golf is a hatchback model under the Volkswagen brand, equipped with two engine options: a 1.2L turbocharged engine and a 1.4L turbocharged engine. In terms of dimensions, the Golf measures 4199mm in length, 1786mm in width, and 1479mm in height, with a wheelbase of 2578mm.
13
4
Share

What is the 0-100 km/h acceleration time of the Haval H8?

Haval H8's 0-100 km/h acceleration time is 9.7 seconds. The 0-100 km/h acceleration refers to the time it takes for a car to accelerate from 0 to 100 kilometers per hour, which is a more intuitive reflection of the car's power. The Great Wall Haval H8 is a model produced by the Great Wall Group and is the first cross-over luxury SUV to enter the mid-to-high-end market. It achieves comprehensive cross-over in terms of platform, power, design, and configuration services, redefining the standards for mid-to-high-end SUVs. The vehicle's dimensions are 4806 mm in length, 1975 mm in width, and 1794 mm in height. The engine type is turbocharged, the drive system is front-engine rear-wheel drive or on-demand four-wheel drive, and the top speed is 218 km/h.
18
4
Share

How to Operate the Windshield Washer with the Wiper?

The method to operate the windshield washer with the wiper is: pull the wiper control lever (the lever on the right side of the steering wheel) towards the driver to spray water. If used frequently, the owner should check the windshield washer fluid level. If the fluid level is too low, it should be replenished promptly to avoid dry wiping by the wiper. When the transparency of the front windshield deteriorates, especially during nighttime driving, dust on the glass can scatter light. At this time, spraying windshield washer fluid is necessary to maintain optimal transparency of the front windshield. The wiper, also known as the windshield wiper or windscreen wiper, is a device used to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety.
19
0
Share

When was the Liberation brand truck manufactured?

Liberation brand truck was manufactured on July 13, 1956, and successfully trial-produced at Changchun First Automobile Works. The first batch of Liberation brand trucks that rolled off the production line was called the CA10 model, which was a truck based on the Soviet ZIS-150. It had a self-weight of 3900 kg, a four-stroke six-cylinder engine, a load capacity of 4 tons, and a maximum speed of 65 km/h. The advent of the Liberation brand truck ended the history of China's inability to produce automobiles. Liberation brand trucks are structurally robust and have a long service life. In addition, there are other models of Liberation brand trucks, such as the CA341 dump truck and the CA931 semi-trailer train.
19
3
Share

What is the proper speed for breaking in a new car?

For a new car, the recommended break-in speed ranges between 50 to 90 kilometers per hour, with the engine speed ideally maintained at 2000 to 2500 rpm. Below are some key considerations during the break-in period: Preheating before starting: When time permits, preheat the engine before driving to ensure proper lubrication. Wait until the idle sound stabilizes and the coolant temperature reaches normal operating levels before setting off. Avoid overloading: Refrain from carrying excessive weight, keeping loads below 70% of the maximum capacity. Overloading accelerates engine wear and makes high-speed or high-RPM driving particularly unsuitable.
6
4
Share

What Does Soft Brakes Mean?

Soft brakes refer to the phenomenon where even when the brake pedal is pressed hard to the floor, the car still comes to a stop slowly, giving the feeling that the brakes lack force. The terms "soft brakes" and "hard brakes" are colloquial expressions that describe the relationship between the force applied to the brake pedal and the actual speed of vehicle deceleration. Soft brakes mean that a significant pedal force results in slow deceleration, while hard brakes indicate that the same force leads to rapid deceleration. Brakes are mechanical devices designed to slow down a vehicle, also known as decelerators. The car's brake pedal is located under the steering wheel; pressing it activates the brake lever, which transmits pressure to the brake pads on the brake drum, clamping the brake rotor to slow or stop the vehicle. The manual brake in a car is located next to the gear shift and is connected to the brake lever.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.