What is the Chery Riich G3?

What is a Three-Way Catalytic Converter in Automobiles?

An automobile's three-way catalytic converter is a device that transforms harmful gases such as CO, HC, and NOx emitted from vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. Below is an introduction to the three-way catalytic converter: 1. Three-Way Catalytic Converter: The core component of a three-way catalytic converter is a porous ceramic material, installed in a specially designed exhaust pipe. It is called a substrate because it does not participate in the catalytic reaction itself but is coated with precious metals such as platinum, rhodium, and palladium. It is the most important external purification device installed in a vehicle's exhaust system. 2. Three-Way Catalytic Converter at High Temperatures: When high-temperature exhaust gases pass through the purification device, the catalyst in the three-way catalytic converter enhances the activity of CO, HC, and NOx, promoting specific oxidation-reduction chemical reactions. CO is oxidized into colorless, non-toxic carbon dioxide gas at high temperatures; HC compounds are oxidized into water (H2O) and carbon dioxide; and NOx is reduced into nitrogen and oxygen. These three harmful gases are converted into harmless gases, thereby purifying the vehicle's exhaust. 3. Cleaning the Three-Way Catalytic Converter: The three-way catalytic converter generally does not require cleaning. If it becomes severely oxidized, it should be replaced directly because the operating temperature of the converter is around 350 degrees Celsius, leaving no liquid water residue, making cleaning ineffective.

11

4

Share

At what water level is a car considered flooded?

The criteria for defining a flooded vehicle are as follows: If the water level exceeds half of the wheel height and enters the interior, it is called a water-soaked vehicle; if the water reaches the engine hood, it is called a flooded vehicle; if the water exceeds the roof, it is called a submerged vehicle. The specific water levels and impacts when a car is submerged are: 1. Water just reaching the chassis—the floor may get damp, but significant water ingress is unlikely, and the impact on electrical components is minimal. 2. Water exceeding half of the wheel height—due to the vehicle's incomplete sealing, water begins entering the cabin. For low-sedan models, the water level may affect seat adjustment motors, heating, ventilation, and other electrical components. 3. Water almost completely covering the tires—the cabin water level will submerge the seat cushions and center console, affecting numerous electrical systems. 4. Water reaching the engine hood—the cabin water rises to the dashboard level, and the headlights and engine air intake begin taking in water. 5. Water fully covering the engine hood—nearly all interior electrical components will be compromised. 6. Water exceeding the roof—the headliner and sunroof module sustain damage, with no interior component remaining unaffected.

15

1

Share

What is the fuel consumption of the manual Hyundai Elantra?

The combined fuel consumption of the manual Hyundai Elantra is 5.6L/100km. The above figure is the NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 5.6-7.3L/100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before red lights, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline for combustion. Heavier cars also have higher fuel consumption because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperatures: When the engine block temperature is low, the injected gasoline during cold starts does not atomize easily, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, in low temperatures, the engine computer may control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

9

1

Share

What is the normal tire pressure range for the Haval M6 Plus?

The normal tire pressure range for the Haval M6 Plus is generally 2.3-2.5 bar. If the car is often parked outdoors, the tire pressure can be about 0.1 bar lower than the standard to prevent tire blowouts due to high temperatures. The hazards of excessive tire pressure are as follows: Tire friction and adhesion will decrease, affecting braking performance; it can cause steering wheel vibration and deviation, reducing driving comfort; it accelerates wear on the central tread pattern of the tire, shortening tire lifespan; increased vehicle vibration indirectly affects the lifespan of other components; excessive tension on the tire cords can reduce tire elasticity, increasing the load on the car while driving; puncture resistance decreases. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks or blowouts. The hazards of insufficient tire pressure are as follows: Friction with the road surface increases, leading to higher fuel consumption; it makes the steering wheel heavy and prone to deviation, compromising driving safety; increased movement of tire parts causes abnormal heat due to excessive rolling; reduced functionality of cords and rubber can lead to delamination or cord breakage, causing damage to the bead area from excessive friction with the rim, resulting in abnormal wear; friction between the tire and the ground multiplies, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to tire blowouts; increased tire deformation can cause cracks on the tire sidewalls, along with flexing movements that generate excessive heat, accelerating rubber aging, cord fatigue, and breakage. It also increases the tire's contact area with the ground, accelerating shoulder wear.

18

4

Share

Which Cars Feature Torsen Full-Time Four-Wheel Drive?

Torsen full-time four-wheel drive is predominantly used in SUV models, with sedans being very rare, as SUVs inherently require four-wheel drive for off-road capabilities. Models equipped with Torsen full-time four-wheel drive across the entire lineup include: Subaru XV, Legacy, Forester, Outback, Range Rover, Lexus LX, Grand Cherokee, Audi Q7, Mercedes-Benz GLE, Range Rover Sport, Cayenne, and more. Here are detailed introductions: 1. Subaru XV: The Subaru XV is a unique vehicle that resembles both a sedan and an SUV, as it is built on the Impreza platform, inheriting many of its excellent traits. The Subaru XV is relatively small in size, so its space is not outstanding within its class. However, it boasts excellent handling and safety performance, and being a fully imported vehicle, it retains its original essence. 2. Legacy: The Legacy is currently Subaru's only sedan model, and it is a mid-sized sedan. However, like other Subaru models, it is not very popular. The Legacy's exterior design is somewhat mediocre, not resembling a model from this era. The interior is also quite ordinary, lacking any notable design elements. The space is adequate but not exceptional. 3. Forester: The Subaru Forester is a compact SUV. Many people assume it is sporty, but it is, in fact, a thorough family car. Although its interior and exterior designs are quite moderate and its performance is average, its spacious interior and superior off-road capabilities compared to typical family SUVs are commendable, making it a family SUV with its own unique character. 4. Range Rover: The Land Rover Range Rover is an imported large-sized SUV and a status symbol, representing success. The Range Rover boasts formidable off-road capabilities, a luxurious interior ambiance, and an overall premium experience. Most importantly, it exudes a strong presence and authority. 5. Audi Q7: The Audi Q7 is a fully imported large-sized SUV, embodying the essence of Audi, much like the Audi A6L. The Audi brand's influence is strongest at this level, with diminishing returns beyond it. Its exterior design is grand and luxurious, with the RS package adding a touch of sportiness. The Q7's interior is exquisitely luxurious without appearing dated, maintaining Audi's signature technological feel. The Q7 is also a practical vehicle, featuring a 7-seat layout with ample space in the rear rows.

17

1

Share

What is the fuel consumption per 100 kilometers for the Corolla 1.8?

The fuel consumption per 100 kilometers for the Corolla 1.8 is 4-4.1L. Currently, there are three models on sale. Among them, the Corolla 2021 Flagship Edition and Elite Edition have a fuel consumption of 4.1L per 100 kilometers, while the Pioneer Edition has a fuel consumption of 4L per 100 kilometers. The above figures are the NEDC combined fuel consumption, which represents the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, at 4.5L/100km. In comparison, the Civic 2022 has a combined fuel consumption of 5.5L/100km, the Xingrui 2021 has 6.7L/100km, and the Lavida 2022 has 5.6L/100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind direction, and environmental temperature. Specific factors that can increase fuel consumption include: Driving habits: Aggressive driving, such as sudden acceleration, overtaking, or not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline for combustion. Heavier cars also consume more fuel due to the greater driving torque needed. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind direction: Driving against the wind or on windy days increases resistance and fuel consumption. Low environmental temperature: When the engine block is cold, the injected gasoline is less likely to atomize, requiring more gasoline for combustion, thus increasing fuel consumption. Additionally, in low temperatures, the engine's computer may control higher RPMs to warm up the engine, which also increases fuel consumption.

13

2

Share

What is the Chery Riich G3?

What is a Three-Way Catalytic Converter in Automobiles?

At what water level is a car considered flooded?

What is the fuel consumption of the manual Hyundai Elantra?

What is the normal tire pressure range for the Haval M6 Plus?

Which Cars Feature Torsen Full-Time Four-Wheel Drive?

What is the fuel consumption per 100 kilometers for the Corolla 1.8?

What is the reason why the clutch cannot be pressed down and the gear cannot be engaged?

What is the principle of turning a car past the B-pillar?

How many points are deducted for parking within 50 meters of an intersection?

What does the D gear in a car mean?