What is the chassis number of the BMW 7 Series?

1 Answers
Bustamante
07/30/25 7:27am
BMW 7 Series chassis number is G11, which is the standard wheelbase version, while the extended wheelbase model has a chassis code of G12. BMW 7 Series engines: The BMW 7 Series is a large luxury sedan equipped with four engines: a 2.0-liter turbocharged engine, a 3.0-liter turbocharged engine, a 4.4-liter twin-turbocharged engine, and a 6.6-liter twin-turbocharged engine. Engine power and torque: The 2.0-liter turbocharged engine has a maximum power of 195 kW and a maximum torque of 400 Nm; the 3.0-liter turbocharged engine has a maximum power of 250 kW and a maximum torque of 450 Nm; the 4.4-liter twin-turbocharged V8 engine has a maximum power of 390 kW and a maximum torque of 750 Nm; the 6.6-liter twin-turbocharged V12 engine has a maximum power of 430 kW and a maximum torque of 850 Nm.
Was this review help?
19
5
Share
More Forum Discussions

What does car hot start mean?

Car hot start refers to restarting the engine after it has been turned off, while the engine temperature is still within the normal operating range, and the oil on the engine's friction surfaces has not yet drained away, with the oil film still present. The precautions for car hot start are: 1. Conduct a thorough inspection before hot starting, including checks on window glass, body assembly, tires, and the trunk; 2. Regularly clean the battery and replenish the battery electrolyte. The reasons for difficulty in car hot start are: 1. High engine temperature, where residual heat continues to warm the fuel lines, increasing fuel pressure in the fuel pipes; 2. Fuel system pressure loss, causing severe gasoline evaporation; 3. Carbon buildup in the throttle or low battery voltage.
18
4
Share

Why does the car lose power and fail to start immediately after ignition?

Car loses power and fails to start immediately after ignition due to the following reasons: Dead battery: The car cannot start normally, most likely because the electrical appliances in the car were not completely turned off, which drained the car battery and caused the failure to start. Spark plug fails to ignite: The spark plug itself is prone to damage, and short circuits in high-voltage lines can cause the spark plug to fail to ignite. Another reason is that poor-quality spark plugs can also lead to failure to start normally. Starting circuit malfunction: During startup, there is only a slight sound and no further response, which is caused by a stuck starting relay.
1
4
Share

What is the Principle of Auto Hold?

The principle of auto hold is: The controller provides accurate parking force through the slope sensor. During startup, the parking control unit calculates information provided by the clutch distance sensor, clutch engagement speed sensor, and throttle pedal sensor. When the driving force exceeds the running resistance, the parking brake is automatically released, allowing the car to start smoothly. Steps to use auto hold: 1. Press the car's brake pedal; 2. Press the car's one-touch start button; 3. The car's dashboard lights up, and the entire vehicle's power is connected; 4. Press the autohold button located inside the car to activate the auto hold mode.
3
4
Share

What is the maintenance interval for a car?

The maintenance interval for a car is every 5,000 kilometers or one year, whichever comes first. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. The purpose of car maintenance is to keep the car clean and tidy, maintain normal technical conditions, eliminate hidden dangers, prevent failures, slow down the deterioration process, and extend the service life. The effects of not performing maintenance on a car include: 1. A dirty air filter can hinder fresh air from entering the cylinder, leading to an overly rich mixture, incomplete combustion, reduced power, and excessive exhaust emissions; 2. A clogged oil filter can impede the flow of lubricating oil, causing poor engine lubrication, increased wear, and even bearing seizure.
9
5
Share

What Causes Poor Acceleration, Jerking Sensation, and High Fuel Consumption in Cars?

Car acceleration is weak, with a jerking sensation and high fuel consumption for the following reasons: Carbon buildup in the car: Carbon deposits include cylinder carbon buildup, throttle carbon buildup, spark plug carbon buildup, intake carbon buildup, etc. These areas are directly related to the engine's power output. When there is excessive carbon buildup inside the engine, the car's ignition energy decreases, intake efficiency drops, ultimately leading to reduced engine power and symptoms like shaking and poor acceleration. Fuel system malfunction: Using an incompatible fuel grade can cause the car's output power to drop and reduce its performance. Alternatively, if the fuel tank vent is blocked, it may fail to meet the required fuel supply, resulting in an overly lean air-fuel mixture and weak engine acceleration.
10
5
Share

Which BMW model has three cylinders?

BMW models with three cylinders include the BMW 1 Series and BMW X2. The BMW 1 Series is equipped with a 1.5T turbocharged engine, which is a three-cylinder engine with a maximum power output of 103kW and a maximum torque of 220Nm. The BMW X2 shares the same powertrain as the BMW 1 Series. The BMW 1 Series is part of BMW's vehicle lineup, featuring the brand's new family design language with a classic M-inspired three-section aerodynamic front bumper and a honeycomb grille design. The BMW X2 is a new compact SUV from BMW, with its iconic kidney grille adopting an innovative narrow-top and wide-bottom design language to lower the visual height of the front end. The extended LED headlights continue BMW's classic design, enhancing safety during nighttime driving.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.