What is the chassis code of the new BMW 5 Series?

1 Answers
Lonnie
07/29/25 6:54pm
The chassis code of the new BMW 5 Series is G30, while the long-wheelbase version is designated as G38. The domestically produced new BMW 5 Series is equipped with three engine options: a low-power 2.0-liter turbocharged engine, a high-power 2.0-liter turbocharged engine, and a 3.0-liter inline six-cylinder turbocharged engine. As one of BMW's model series, the new 5 Series has gained high recognition from consumers in terms of technology, performance, and brand influence. It features the improved second-generation iDrive control system, originally equipped in the new BMW 7 Series, with a simplified menu structure that allows for easy and intuitive control of various assistance functions.
Was this review help?
19
5
Share
More Forum Discussions

How many kilometers does the BMW 5 Series require for its first maintenance?

BMW 5 Series requires its first maintenance at 10,000 kilometers. Below is an introduction to the content and purpose of the first maintenance: First maintenance content: Replace engine oil and oil filter; check the operation of the braking system, such as the gap and wear of brake pads and discs; tighten bolts of various systems; inspect and adjust the drive belt; check and adjust tire balance and alignment; inspect and replenish various fluids; check the operation of components such as lights, battery, and shock absorbers. Purpose of first maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
10
1
Share

Can You Turn on the Wiper When It Snows?

If there is ice on the windshield or the snow is too thick, it is recommended that the owner does not use the wiper. When parking, it is a good choice to lift the wiper up, which can prevent the wiper from being frozen by snow and frost. Rubber has a certain temperature range for use. If the wiper is frozen by snow and frost for a long time, it will reduce the service life of the wiper, and the wiping effect will also be affected to a certain extent. There are five common wiper gears: MISI, OFF, INT, LO, and HI. MISI stands for a single wipe, OFF means turning off, and LO and HI indicate low-frequency and high-frequency wiping, respectively. Do not turn on the wiper directly without spraying windshield washer fluid. If the front windshield is too dirty, it is best to gently clean the dirt on the windshield with a dry cloth first.
13
3
Share

How many liters of fuel can an eighth-generation Civic hold?

Dongfeng Honda Civic has a fuel tank capacity of 50 liters. Here is more information about the Civic: 1. Exterior: The model features xenon headlights, 17-inch wheels, and Michelin PS3 tires, which are quite rare in its class. However, compared to the Civic's sporty appearance, its chassis seems somewhat high. 2. Interior: The driver-oriented dashboard, dual-layer instrument panel, and red push-to-start button all contribute to its sporty look. 3. Multimedia system experience: It includes a smart system that can project phone content onto the car screen. 4. Passenger space experience: Compared to other vehicles in its class, the actual space measurement is average. 5. Seats and riding comfort: The front seats are moderately firm, while the rear seats are softer and more comfortable.
14
0
Share

What is the Principle of a Torque Sensor?

Torque sensor works by sending action commands to the motor controller through signals. The following are the principle and function of the steering system: Working principle of torque sensor: The working principle of a torque sensor is that when the car is steering, the torque sensor will sense the torque of the steering wheel and the intended direction of rotation. These signals are sent to the electronic control unit via the data bus, and the electronic control unit will issue action commands to the motor controller based on the transmitted torque, intended direction of rotation, and other data signals. The motor will then output the corresponding magnitude of rotational torque as needed. Function of the steering system: The steering system is a control mechanism used in automobiles to change the direction of travel. Its function is to control the direction of travel according to the driver's intention.
3
4
Share

What is the difference between parking lights and hazard warning lights?

Parking lights and hazard warning lights serve different purposes. Below are the relevant introductions about their functions: Function of hazard warning lights: Hazard warning lights flash at regular intervals, which are the turn signals we commonly use, with a yellow color; while parking lights remain constantly on, located at the widest and highest positions around the vehicle body, with white at the front and red at the rear. The full name of hazard warning lights is 'hazard warning flashers', also commonly known as 'emergency flashers'. They are signal lights on a car, mainly used to alert other vehicles and pedestrians that the car is in a special situation, prompting them to give way in time. Function of parking lights: Parking lights are warning lights that provide safety alerts to the surrounding environment, such as vehicles and pedestrians, when the car is temporarily parked and turned off, to indicate the car's position and display its outline.
4
2
Share

How to turn on the heating in an Audi A3?

Audi A3 semi-automatic air conditioning does not require turning on the AC switch. Adjust the temperature control switch to the heating mode, and with the car running, turning on the fan will blow warm air. For automatic air conditioning, simply adjust the temperature directly. Here is more information about the Audi A3 air conditioning system: 1. The Audi A3 is equipped with either manual or automatic air conditioning depending on the model configuration. The automatic air conditioning function includes automatic adjustment of interior temperature and humidity, automatic control of air recirculation and supply modes, as well as operation modes and air volume control. 2. The electronic control unit will operate the air conditioning system automatically based on the settings made by the driver or passengers via the buttons on the air conditioning display control panel. It adjusts the air supply temperature and speed in real-time according to signals from various sensors to maintain the optimal interior air environment. The electronic control unit can also change the temperature distribution inside the car by selecting different air outlets according to climate changes.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.